Troll gear definition

Troll gear means one or more lines with hooks or lures attached drawn through the water behind a mov- ing vessel. This gear type includes hand troll and power troll gear and dinglebar gear.
Troll gear means a lure or jigtowed behind a vessel via a fishing line. Troll gear is used in commercial and recreational fisheries.
Troll gear means a lure or jig towed behind a vessel via a fishing line. Troll gear is used in commercial and recreational fisheries.

Examples of Troll gear in a sentence

  • Troll gear also takes small amounts of skipjack with occasional catches of other tuna species.

  • Troll gear includes a single mainline with a limit on the number of hooks on the line and onboard the vessel, gear marker requirements, and float/hook spacing requirements.and therefore would still be prohibited from fishing in the non-trawl RCA if we implement management measure A.

  • Troll gear accounted for <1% of the total catch (10,972t), a decrease from the highest value (141,117t), recorded in 2016, this was mainly due to a separation of the Indonesian troll catch from their combined artisanal gear catch.


More Definitions of Troll gear

Troll gear means one or more lines with hooks or lures attacheddrawn through the water behind amoving vessel. This gear type includes hand troll and power troll gear.* * * * *Buying station means a tender vessel or land-based entity that receivesunprocessed groundfish from a vessel for delivery to a shoreside processor or mothership and that does not process those fish.* * * * *CDQ delivery number means a sequential number assigned by thecatcher vessel operator that uniquely identifies each CDQ delivery. The sequence of CDQ delivery numbers begins with the first fishing activity under a multispecies CDQ, and thenumber is incrementally adjusted by one with each delivery of fish.* * * * *CDQ number or group number means a number assigned to a CDQ group byNMFS that must be recorded in all logbooks and all reports submitted by the CDQ group or by vessels andprocessors catching CDQ or PSQ under an approved CDP.* * * * *Chinook Salmon Savings Area of the BSAI (see § 679.21(e)(7)(viii) and Figure 8 to this part).Chum Salmon Savings Area of theBSAI CVOA (see § 679.21(e)(7)(vii) and Figure 9 to this part).* * * * *Fish product (see groundfish product).* * * * *Forage fish means all species of the following families (see also Table 2 to this part): * * *Gear deployment means:(1) For trawl gear: Where the trawlgear reaches the fishing level and begins to fish.(2) For longline gear: Where the gearenters the water.(3) For pot gear: Where the first pot enters the water.* * * * *Haul (see gear retrieval).* * * * *Nearshore Bristol Bay Trawl Closure Area of the BSAI (see § 679.22(a)(9) and Figure 12 to this part).* * * * *Non-chinook salmon means coho, pink, chum or sockeye salmon.* * * * *Other gear means gear other than authorized fishing gear.* * * * *Person means:(1) IFQ and CDQ Programs and General Usage means any individualwho is a citizen of the United States or any corporation, partnership,association, or other entity (or itssuccessor-in-interest), regardless ofwhether organized or existing under the laws of any state, who is a U.S. citizen.(2) High Seas Salmon Fishery permits* * *(3) Vessel Moratorium (Applicable through December 31, 1998) * * ** * * * *Set means a string of pots or hook- and-line gear or a group of pots that isdeployed in the water in a similar location with similar soak time. A set begins when gear is deployed into the water and includes a test set,unsuccessful harvest, or when gear is
Troll gear means one or more lines with hooks or lures attacheddrawn through the water behind amoving vessel. This gear type includes hand troll and power troll gear.* * * * *Buying station means a tender vessel or land-based entity that receivesunprocessed groundfish from a vessel for delivery to a shoreside processor or mothership and that does not process those fish.* * * * *CDQ delivery number means a sequential number assigned by thecatcher vessel operator that uniquely identifies each CDQ delivery. The sequence of CDQ delivery numbers begins with the first fishing activityunder a multispecies CDQ plan, and the number is incrementally adjusted byone with each delivery of fish.* * * * *CDQ number or group number means a number assigned to a CDQ group byNMFS that must be recorded in all logbooks and all reports submitted by the CDQ group or by vessels andprocessors catching CDQ or PSQ under an approved CDP.* * * * *Chinook Salmon Savings Area of the BSAI (See § 679.21(e)(7)(viii) and Figure 8 to this part.)Chum Salmon Savings Area of theBSAI CVOA (See § 679.21(e)(7)(vii) and Figure 9 to this part.)* * * * *Fish product (See groundfish product.)* * * * *Fishing trip means:(1) Retention requirements (MRB, IR/ IU, and pollock roe stripping). Withrespect to retention requirements of MRB, IR/IU, and pollock roe stripping, an operator of a vessel is engaged in afishing trip from the time the harvesting, receiving, or processing of groundfish is begun or resumed in an area until:* * * * *Forage fish means all species of the following families (see also Table 2 to this part):* * * * *Gear deployment means:(1) For trawl gear: Where the trawlgear reaches the fishing level and begins to fish.(2) For longline gear: Where the gear enters the water.

Related to Troll gear

  • fishing gear means any item or piece of equipment that is used in fishing or aquaculture to target, capture or rear marine biological resources or that is floating on the sea surface, and is deployed with the objective of attracting and capturing or of rearing such marine biological resources;

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the x-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the x-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Palletized unit load means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

  • Automobile or watercraft transporters means any tractor truck, lowboy, vehicle, or combination,

  • Customer-generator means a user of a net metering system.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • controlled flight means any flight which is subject to an air traffic control clearance;

  • Cannabis cultivation facility means a person that:

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Transit Passenger means a passenger who arrives at the airport in an aircraft and departs from the airport in the same aircraft, where such an aircraft is operating a through flight transiting the airport, and includes a passenger in transit through the airport who has to depart in a substituted aircraft because the aircraft on which the passenger arrived has been declared unserviceable.

  • APU means the auxiliary power unit of the Aircraft.

  • Sub-meter means a metering point for electricity consumption that does not include all electricity consumption for the end-use customer as defined by the electric distribution company account number. PJM shall only accept sub-meter load data from end-use customers for measurement and verification of Regulation service as set forth in the Economic Load Response rules and PJM Manuals.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Engine Manufacturer means CFM International, Inc.

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.

  • wind turbine generator or “WTG” means a structure comprising a tower, rotor with three blades connected at the hub, nacelle and ancillary electrical and other equipment which may include J-tube(s), transition piece, access and rest platforms, access ladders, boat access systems, corrosion protection systems, fenders and maintenance equipment, helicopter landing facilities and other associated equipment, fixed to a foundation;

  • Residual disinfectant concentration (“C” in CT cal- culations) means the concentration of disinfectant measured in mg/l in a representative sample of water.

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Substitute natural gas or "SNG" means a gas manufactured

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Fixed wing turbine powered aircraft means an aircraft that:

  • Sub-contracting means the primary contractor’s assigning or leasing or making out work to, or employing another person to support such primary contractor in the execution of part of a project in terms of the contract.