Examples of WALL AREA in a sentence
A drawing of the elevation of the STRUCTURE on which the proposed SIGN is to be erected, including: doors, windows and other openings, wall finishing materials, WALL AREA, OCCUPANCY FRONTAGES, dimensions, location and elevations of the proposed SIGN and all other EXISTING SIGNS attached to the same wall.
BLANK WALL AREA means any portion of the exterior of a building that does not include a material change, windows or doors, or columns, pilasters, or other articulation greater than 12 inches in depth.
BLANK WALL AREA means any portion of the exterior of a building facade that does not include a material change, windows or doors, or columns, pilasters, or other articulation greater than 12 inches in depth.
SIGN WALL AREA The area of a building wall below 30 feet abutting on a street, including windows and doors.
STREET CLASSIFICATIONAREA¹ / HEIGHT²% SIGNABLE WALL AREA FREESTANDINGP: Permitted NP: Not Permitted ¹ Maximum permitted area in square feet per sign face ² Maximum height from average grade at curb line or edge of pavement in feet Section 4280.4 Bonuses.
STREET CLASSIFICATIONAREA¹ / HEIGHT²% SIGNABLE WALL AREA FREESTANDINGTable 1.2 Signs not located within 100 feet (100') of a Residential Zoning District as designated on the Official Zoning Map of the City of Goshen (Ordinance 3011).
N/E/S EXTERIOR WALL AREA (B Minus G) FT × 6 FT = ft2 × 0.40 =ft2N/E/S of WEST EXTERIOR WALL AREA 40% N/E/S AREA ft2 M.
Assignments % ofFinal GradeAsynchronous Material (Please refer to learning agreement for 70%detailsParticipation in Synchronous (live) sessions 30% PLEASE REFER TO THE LEARNING AGREEMENT LOCATED ON YOUR COURSE WALL AREA FOR CLARIFICATION REGARDING THE ASSIGNMENTS.
BLANK WALL AREA means any portion of the exterior of a building that does not include a green wall, windows or doors, or columns, pilasters, or other articulation greater than 12 inches in depth, measured horizontally on each story.
Responsible Person for this paragraph 15.12 - NON DEDUCTION OF WALL AREA FROM THE GROSS AREA-P-81 It would be seen from the following measurements that centring and shuttering charges are allowed basing upon of the gross area of the roof without deducting the wall area.