Waterworks standards definition

Waterworks standards means regulations adopted by the state board entitled “California Waterworks Standards” (Chapter 16 (commencing with Section 64551) of Division 4 of Title 22 of the California Code of Regulations).
Sample 1Sample 2Sample 3
Waterworks standards means regulations adopted by the state board that take cognizance of the latest available “Standards of Minimum Requirements for Safe Practice in the Production and Delivery of Water for Domestic Use” adopted by the California section of the American Water Works Association.
Sample 1
Waterworks standards means regulations adopted by the state board that take cognizance of the latest available “Standards of Minimum Requirements for Safe Practice in the Production and Delivery of Water for
Sample 1Sample 2

Examples of Waterworks standards in a sentence

  • Sewer force mains shall be constructed to Waterworks Standards using AWWA C900 or C905 PVC or Fusion Welded HDPE.

  • Water supply: Water shall be provided to meet the requirements as set forth in the California Administrative Code, Title 22, Chapter 16 (California Waterworks Standards).

  • Water Supply: Water shall be provided to meet the requirements as set forth in the California Administrative Code, Title 22, Chapter 16 (California Waterworks Standards).

  • Water Supply: water shall be provided to meet the requirements as set forth in the California Administrative Code, Title 22, Chapter 16 (California Waterworks Standards).

  • The utility is currently installing an additional 6,500 gallon steel tank to supplement the current storage and to more closely meet the Department of Health Services' (DHS) Waterworks Standards.

  • This alternate assumes that the Ventura County Fire Protection District and/or VRWD require that distribution facilities be installed in order to provide domestic service and fire protection to each of the parcels in accordance with the Ventura County Waterworks Standards, as amended from time to time.

  • Category E - Secondary Risks • The distribution of water that exceeds secondary drinking water standards.• The distribution of water in excess of a published chemical notification level.• The distribution of water, which has exceeded a primary drinking water standard in one or more samples, but has not violated a running average standard.• A standby groundwater source that exceeds a primary drinking water standard.• Deficiencies that violate Waterworks Standards (other than those already covered above).

  • The system’s MDD and [Peak Hour Demand] PHD shall be determined in accordance with Waterworks Standards, CCR Title 22, Section 64554, or its successor.

  • A system’s facilities shall have the capacity to meet the source capacity requirements as defined in the Waterworks Standards, [California Code of Regulations] CCR Title 22, Section 64554, or its successor.

  • This amount shall be in addition to the average day demand as defined in the California Administrative Code, Title 22, Chapter 16 (California Waterworks Standards).


More Definitions of Waterworks standards

Waterworks standards means regulations adopted by the State Water Board entitled “California Waterworks Standards” (Chapter 16 (commencing with Section 64551) of
Sample 1

Related to Waterworks standards

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Industry Standards means security measures that are commercially reasonable in the information technology industry and that are designed to ensure the security, integrity, and confidentiality of Accenture Data, and to protect against Security Incidents.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Benchmarks Regulation means Regulation (EU) 2016/1011 of the European Parliament and of the Council of 8 June 2016 on indices used as benchmarks in financial instruments and financial contracts or to measure the performance of investment funds and amending Directives 2008/48/EC and 2014/17/EU and Regulation (EU) No 596/2014;

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;