Winter Dependable Capacity definition

Winter Dependable Capacity means capacity rating based on ambient conditions of 68° Fahrenheit and 74% relative humidity.
Sample 1Sample 2Sample 3

Examples of Winter Dependable Capacity in a sentence

  • The Option Premium for Purchased Capacity shall be $[ ] per kW/Year, based on the Summer Dependable Capacity for the Summer Capacity Season or the Winter Dependable Capacity for the Winter Capacity Season, as the case may be.

  • Buyer shall have the right to request a re-determination of the Summer Dependable Capacity and the Winter Dependable Capacity through a Capacity Demonstratio n Test, at Buyer’s expense, up to four (4) times during the Delivery Termtwice each Contract Year at any time upon three (3) Business Days’ prior written notice to Seller.

  • Bidder must specify Capacity Quantities as Summer Dependable Capacity during the Summer Capacity Season (April-September) at 97°F, 56% R.H. and Winter Dependable Capacity during the Winter Capacity Season (October-March) at 68°F, 74% R.H.   [FLD 40] MW Summer Capacity Season   [FLD 41] XX Xxxxxx Capacity Season   [FLD 42] MW Unit Minimum Guaranteed Heat Rate Enter the Guaranteed Heat Rate points in the designated spaces.

  • The Capacity Payment made monthly in arrears is the product of the Capacity Purchase Price and the relevant Winter Dependable Capacity or Non Winter Dependable Capacity as the case may be as set out in Schedule 6 of the PPA and Table 1 of the Second Amendment of PPA.

  • The Summer Dependable Capacity and the Winter Dependable Capacity determined pursuant to a Capacity Demonstration Test shall become the new Summer Dependable Capacity and the Winter Dependable Capacity following such testing.

  • For Product Packages A and C, ESI is not requiring Seasonal Capacity as in the case for Product B, and thus does not intend to pay an Option Premium based on a Summer Dependable Capacity and a Winter Dependable Capacity.

  • For Product Packages A and C, please clarify if it is Entergy’s intent to pay the Option Premium based on a Summer Dependable Capacity and a Winter Dependable Capacity as it is for Product Package B.

Related to Winter Dependable Capacity

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Water-dependent use means a use or portion of a use which cannot exist in a location that is not adjacent to the water and which is dependent on the water by reason of the intrinsic nature of its operations.

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Water dependent means a structure for commerce or industry which cannot exist in any other location and is dependent on the water by reason of the intrinsic nature of its operations.

  • Mother plant means a marijuana plant that is grown or maintained for the purpose of generating clones, and that will not be used to produce plant material for sale to a processor or dispensary.

  • Partial Dependant means a "dependant" as prescribed in paragraph (a) of this subclause who receives a location allowance which is less than the location allowance prescribed in subclause (1) of this clause or who, if in receipt of a salary or wage package, receives less than a full consideration for which the location allowance is payable pursuant to the provisions of this clause.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Nonminor dependent means any individual age eighteen to twenty-one years who is participating in extended foster care services authorized under RCW 74.13.031.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • In a representative capacity means acting as:

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.

  • Sub-acute facility means a facility that provides intermediate care on short-term or long-term basis.

  • Functionally Dependent Facility means a facility which cannot be used for its intended purpose unless it is located in close proximity to water, limited to a docking or port facility necessary for the loading and unloading of cargo or passengers, shipbuilding, or ship repair. The term does not include long-term storage, manufacture, sales, or service facilities.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Reconstructive breast surgery means surgery performed as a result of a mastectomy to reestablish symmetry between the two breasts and includes augmentation mammoplasty, reductive mammoplasty, and mastopexy.