GENERAL PROVISIONS. JSC “Baltic Production Service“, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments in the infrastructure necessary for the provision of CCI services ” (Project No. 13.1.1-LVPA-K-309-01-0029), which is partially financed from the European Union structural funds and the Republic of Lithuania and planning the purchase of a set of direct control electric chain hoists. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/2022. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager Xxxxxxx Xxxxxx, Tel. No + 000 000 00000, e-mail: xxxx@xxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės g. 4, LT-02300 Vilnius. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas
GENERAL PROVISIONS. JSC “Baltic Production Service“Kovilis”, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of digital technologies in UAB Kovilis in order to increase the infrastructure necessary for the provision of CCI services company's productivity ” (Project No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290083), which is partially financed from . Subsidy agreement for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is signed. JSC „Kovilis“ intends to buy the purchase of a set of direct control electric chain hoistsfollowing: „bonnell“ type spring production equipment. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202222/02/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager “Kovilis” Manager Xxxxxxx XxxxxxXxxxxxx, Telphone no. No + 000 000 0000000 000, e-mail: xxxx@xxx.xxmail xxxxxxx@xxxxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists „bonnell“ type spring production equipment (1 unit) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 4 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės Meistrų g. 48, LT-02300 VilniusLT-36101 Panevėžys, Lietuva. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas
GENERAL PROVISIONS. JSC “Baltic Production Service“Glori” ir Ko, (hereinafter – the Buyer) is implementing the project entitled “JSC Implementation of digital technologies in UAB „Mano discoGlori“ investments Ko in order to increase the infrastructure necessary for the provision of CCI services company's productivity ” (Project Application No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290066), which is partially financed from . Application for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is submitted. JSC “Glori” ir Ko intends to buy the purchase of a set of direct control electric chain hoistsfollowing: CNC controlled sheet metal press brake with bending robot. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202202/03/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager Xxxxxxx Xxxxxx“Glori” ir Ko Manager Xxxxxxxxx Xxxxxxxxxx, Telphone no. No + 000 000 00000, e-mail: xxxx@xxx.xxel. p. xxxx@xxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists CNC controlled sheet metal press brake with bending robot (1 unit) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 4 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės Kauno g. 419, LT-02300 VilniusIlgakiemis LT-53288, Kauno r., Lietuva. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas
GENERAL PROVISIONS. JSC “Baltic Production Service„Intervilža“, (hereinafter – the Buyer) is implementing the project entitled “Implementation of digital technologies in JSC „Mano disco“ investments in Intervilža“in order to increase the infrastructure necessary for the provision of CCI services company's productivity ” (Project Application No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290119), which is partially financed from . Application for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is submitted. JSC „Intervilža“ intends to buy the purchase of a set of direct control electric chain hoistsfollowing: coextrusion equipment WPC (3 units), forming equipment TL (1 unit), forming equipment FP (1unit). The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202212/07/2022. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production ServiceIntervilža“ manager Xxxxxxx XxxxxxManager Xxxxxxxx Xxxxxxxx, Tel. No + 000 xxxxxxxx@xxxxxxxxxx.xx, +000 000 00000, e-mail: xxxx@xxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists coextrusion equipment WPC (3 units), forming equipment TL (1 unit), forming equipment FP (1 unit) (1 set) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 9 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės g. 4Savanorių pr. 151, LT-02300 LT-03150 Vilnius, Lietuva. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Tender Conditions
GENERAL PROVISIONS. JSC “Baltic Production Service“EKSMA OPTICS”, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments in the infrastructure necessary for the provision Opt. optimization of CCI services component production processes by creating and implementing more efficient opt. surface preparation, coating coating and opt. contact technology” (Project No. 13.1.101.2.1-LVPA-K-309K-856-01-0029), which is partially financed from 0145) jointly funded by the European Union structural funds Structural Funds and the Republic of Lithuania and planning intends to buy the purchase of a set of direct control electric chain hoistsfollowing equipment: interferometer (1 unit). The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202226/04/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager Xxxxxxx Xxxxxxtechnical director Xxxxxxxx Xxxxxxxx; tel. +000-0-0000000; x.xxxxxxxx@xxxxxxxxxxx.xxx, TelMokslininkų str. No + 000 000 0000011, e-mail: xxxx@xxx.xxVilnius, LT-08412. The equipment purchased shall be intended for a set direct control electric chain hoists interferometer (hereinafter – the Goods1 unit), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 5 months from the day of signing the Procurement Contract. This term may be extended no longer than for a period not exceeding 2 months on the basis of a written mutual agreementadditional 3 months. The place for delivery - Plungės g. 4Mokslininkų str. 11, LT-02300 Vilnius. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:, LT-08412.
Appears in 1 contract
Samples: Competition Terms
GENERAL PROVISIONS. JSC “Baltic Production Service“, Barker Textiles” (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of technological eco-innovations in the infrastructure necessary for the provision production of CCI services UAB Barker Textiles” (Project Application No. 13.1.103.3.2-LVPA-K-309K-837-0103-00290072), which is partially financed from . Application for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is submitted. JSC “Barker Textiles” intends to buy the purchase of a set of direct control electric chain hoistsfollowing: Dobby weaving looms. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202208/08/2022. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager Xxxxxxx XxxxxxXxxx Xxxxxxxxx, Tel. No + 000 phone: +000 000 00000, e-mail: xxxx@xxx.xxxxxx.xxxxxxxxx@xxxxxxxxxxxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists Dobby weaving looms (2 units) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered delivered, installed and trainings for employees provided within a period no longer than 2 10 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement, but no longer than till 31/08/2023. The place for delivery - Plungės g. 4Raudondvario ave. 101, LT-02300 VilniusLT-47184 Kaunas, Lithuania. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Competition Terms
GENERAL PROVISIONS. JSC “Baltic Production Service“Komex”, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of digital technologies in order to optimize the infrastructure necessary for the provision of CCI services company's production processes ” (Project project No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290110), which is partially financed from . Agreement for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania is signed. JSC „Komex“ intends to buy the following: equipment for production of courier bags and planning the purchase of a set of direct control electric chain hoiststhermal insulation bags (2 sets). The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202206/05/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager Xxxxxxx Xxxxxx“Komex” Manager Xxxxxxxx Xxxxxxx, Telphone no. No + +000 000 000 0000000 000, e-mail: xxxx@xxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės g. 4, LT-02300 Vilnius. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:mail xxxxxxxx@xxxxx.xx.
Appears in 1 contract
Samples: Tender Conditions
GENERAL PROVISIONS. JSC “Baltic Production ServiceMano disco“, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano discoDisco“ investments in the infrastructure necessary for the provision of CCI services ” (Project No. 13.1.1-LVPA-K-309-01-0029), which is partially financed from the European Union structural funds and the Republic of Lithuania and planning the purchase of a set of direct smart electrical and light control electric chain hoistssystem. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202204/10/2022. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production ServiceMano disco“ manager Xxxxxxx Xxxxxx, Tel. No + 000 000 00000, e-mail: xxxx@xxx.xxxxxx@xxxxxxxxx.xx. The equipment purchased shall be intended for a set direct of smart electrical and light control electric chain hoists system (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 3 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės g. 4Vilkpėdės x. 0, LT-02300 Vilnius00 xxxxxxxx, XX-00000 Xxxxxxx. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas
GENERAL PROVISIONS. JSC “Baltic Production ServiceLitamilk“, (hereinafter – the Buyer) is implementing the project entitled “JSC Implementation of digital technologies in UAB „Mano discoLitamilk“ investments in order to increase the infrastructure necessary for the provision of CCI services company's productivity ” (Project Application No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290129), which is partially financed from . Application for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania is submitted. JSC „Litamilk“ intends to buy the following: automated drying and planning the purchase of a set of direct control electric chain hoistspackaging equipment for dry milk products. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202213/04/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC UAB „Baltic Production ServiceLitamilk“ manager General Manager Xxxxxxx XxxxxxXxxxxxxxx, Tel. No Nr. + 000 000 0000000 00 0000, e-mail: xxxx@xxx.xxel. p. xxxxxxx.xxxxxxxxx@xxxxxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists automated drying and packaging equipment for dry milk products (1 set) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 10 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months 12/12/2022 on the basis of a written mutual agreement. The place for delivery - Plungės Kirtimu g. 449, LT-02300 LT-02244 Vilnius, Lietuva. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas
GENERAL PROVISIONS. JSC “Baltic Production Service“SKP stiklas”, (hereinafter – the Buyer) is implementing the project entitled “Digital technology implementation in JSC „Mano disco“ investments in the infrastructure necessary for the provision of CCI services “SKP stiklas” (Project No. 13.1.103.3.1-LVPA-K-309K-854-01-0029), which is partially financed from 0011) jointly funded by the European Union structural funds Structural Funds and the Republic of Lithuania and planning intends to buy the purchase of a set of direct control electric chain hoistsfollowing: automated flat glass processing equipment. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202205/08/2019. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager “SKP stiklas” Equipment Maintenance Manager Xxxxxxx XxxxxxXxxxxxx, Telphone no. No + +000 000 000 0000000 000, e-mail: xxxx@xxx.xxmail xxxxxxx.xxxxxxx@xxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists automated flat glass processing equipment (1 unit) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 8 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The extended term of Goods delivery cannot be longer than project implementation period and period of eligible costs. The place for delivery - Plungės g. 4Chemijos str. 29A, LT-02300 VilniusLT-51333 Kaunas. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas
GENERAL PROVISIONS. JSC “Baltic Production Service“SKP stiklas”, (hereinafter – the Buyer) is implementing the project entitled “Digital technology implementation in JSC „Mano disco“ investments in the infrastructure necessary for the provision of CCI services “SKP stiklas” (Project No. 13.1.103.3.1-LVPA-K-309K-854-01-0029), which is partially financed from 0011) jointly funded by the European Union structural funds Structural Funds and the Republic of Lithuania and planning intends to buy the purchase of a set of direct control electric chain hoistsfollowing: bending and filling equipment. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/2022. 06/04/2021 The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager “SKP stiklas” Equipment Maintenance Manager Xxxxxxx XxxxxxXxxxxxx, Telphone no. No + +000 000 000 0000000 000, e-mail: xxxx@xxx.xxmail xxxxxxx.xxxxxxx@xxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists bending and filling equipment (1 set) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 6 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The extended term of Goods delivery cannot be longer than project implementation period and period of eligible costs. The place for delivery - Plungės g. 4Chemijos str. 29A, LT-02300 VilniusLT-51333 Kaunas. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Competition Conditions
GENERAL PROVISIONS. JSC “Baltic Production Service“, Barker Textiles” (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of technological eco-innovations in the infrastructure necessary for the provision production of CCI services UAB Barker Textiles” (Project Application No. 13.1.103.3.2-LVPA-K-309K-837-0103-00290072), which is partially financed from . Application for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is submitted. JSC “Barker Textiles” intends to buy the purchase of a set of direct control electric chain hoistsfollowing: Dobby weaving looms. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202213/12/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager Xxxxxxx XxxxxxXxxx Xxxxxxxxx, Tel. No + 000 phone: +000 000 00000, e-mail: xxxx@xxx.xxxxxx.xxxxxxxxx@xxxxxxxxxxxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists Dobby weaving looms (2 units) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered delivered, installed and trainings for employees provided within a period no longer than 2 12 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės g. 4Raudondvario ave. 101, LT-02300 VilniusLT-47184 Kaunas, Lithuania. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Competition Terms
GENERAL PROVISIONS. JSC “Baltic Production Service“SKP stiklas”, (hereinafter – the Buyer) is implementing the project entitled “Digital technology implementation in JSC „Mano disco“ investments in the infrastructure necessary for the provision of CCI services “SKP stiklas” (Project No. 13.1.103.3.1-LVPA-K-309K-854-01-0029), which is partially financed from 0011) jointly funded by the European Union structural funds Structural Funds and the Republic of Lithuania and planning intends to buy the purchase of a set of direct control electric chain hoistsfollowing: insulated glass production line. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/2022. 15/09/2020 The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager “SKP stiklas” Equipment Maintenance Manager Xxxxxxx XxxxxxXxxxxxx, Telphone no. No + +000 000 000 0000000 000, e-mail: xxxx@xxx.xxmail xxxxxxx.xxxxxxx@xxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists automated glass package assembly line (1 unit) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 10 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The extended term of Goods delivery cannot be longer than project implementation period and period of eligible costs. The place for delivery - Plungės g. 4Chemijos str. 29A, LT-02300 VilniusLT-51333 Kaunas. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Competition Conditions
GENERAL PROVISIONS. JSC “Baltic Production Service“, Barker Textiles” (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of technological eco-innovations in the infrastructure necessary for the provision production of CCI services UAB Barker Textiles” (Project Application No. 13.1.103.3.2-LVPA-K-309K-837-0103-00290072), which is partially financed from . Application for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is submitted. JSC “Barker Textiles” intends to buy the purchase of a set of direct control electric chain hoistsfollowing: Dobby weaving looms. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202205/11/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager Xxxxxxx XxxxxxXxxx Xxxxxxxxx, Tel. No + 000 phone: +000 000 00000, e-mail: xxxx@xxx.xxxxxx.xxxxxxxxx@xxxxxxxxxxxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists Dobby weaving looms (2 units) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered delivered, installed and trainings for employees provided within a period no longer than 2 12 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės g. 4Raudondvario pl. 101, LT-02300 VilniusLT-47184 Kaunas, Lithuania. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Competition Terms
GENERAL PROVISIONS. JSC “Baltic Production Service“Kovilis”, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of digital technologies in UAB Kovilis in order to increase the infrastructure necessary for the provision of CCI services company's productivity ” (Project No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290083), which is partially financed from . The project financing agreement for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is signed. JSC „Kovilis“ intends to buy the purchase of a set of direct control electric chain hoistsfollowing: „pocket“ type spring production equipment. The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202222/02/2021. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ manager “Kovilis” Manager Xxxxxxx XxxxxxXxxxxxx, Telphone no. No + +000 000 000 0000000 000, e-mail: xxxx@xxx.xxmail xxxxxxx@xxxxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists „pocket“ type spring production equipment (1 unit) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 4 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreement. The place for delivery - Plungės Meistrų g. 48, LT-02300 VilniusLT-36101 Panevėžys, Lietuva. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas
GENERAL PROVISIONS. JSC “Baltic Production Service“Komex”, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of digital technologies in order to optimize the infrastructure necessary for the provision of CCI services company's production processes ” (Project project No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290110), which is partially financed from . Agreement for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is signed. JSC „Komex“ intends to buy the purchase of a set of direct control electric chain hoistsfollowing: gravitetric blending system for extrusion line (2 sets). The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202219/09/2023. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ “Komex” production manager Xxxxxxx Xxxxxx, Teltel. No + 000 No. +000 000 00000, e-mail: xxxx@xxx.xxe-mail:xxxxxxx.xxxxxx@xxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists gravitetric blending system for extrusion line (2 sets) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 3 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreementagreement until 31/12/2023. The place for delivery - Plungės Tinklų g. 46b, LT-02300 VilniusPanevėžys. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Contract for Supply of Equipment
GENERAL PROVISIONS. JSC “Baltic Production Service“Komex”, (hereinafter – the Buyer) is implementing the project entitled “JSC „Mano disco“ investments Implementation of digital technologies in order to optimize the infrastructure necessary for the provision of CCI services company's production processes ” (Project project No. 13.1.103.3.1-LVPA-K-309K-854-0102-00290110), which is partially financed from . Agreement for partial fundation by the European Union structural funds Structural Funds and the Republic of Lithuania and planning is signed. JSC „Komex“ intends to buy the purchase of a set of direct control electric chain hoistsfollowing: automatic film wrapping device for polyethylene extrusion line (1 set). The principal concepts shall be used as defined in the Rules for Governing Project Administration and Financing, Approved by the Minister of Finance of the Republic of Lithuania by Order No. 1K-316 of 8 October 2014 (hereinafter – The Rules) The Procurement shall be executed in compliance with the Rules, the Civil Code of the Republic of Lithuania (hereinafter – the Civil Code), other legal acts and Tendering Process Terms and Conditions (hereinafter– Tendering Terms and Conditions). Publication of the Procurement Notice has been executed on the European Union Fund Investment website xxx.xxxxxxxxxxxxxx.xx 22/06/202219/09/2023. The Procurement shall be conducted through a Tendering Process, in accordance with the principles of equality, non-discrimination, mutual recognition, proportionality, transparency. If the Tendering Process does not take place because no Tender is received from any Supplier complying with the requirements set out by the Buyer, the Buyer shall reserve the right to conduct a Tendering Process repeatedly, in accordance with a procedure prescribed in item 461.1 of the Rules. The person authorized by the Buyer to maintain regular contact with the Suppliers and receive their notifications related to the Procurement procedures shall be the following: JSC „Baltic Production Service“ “Komex” production manager Xxxxxxx Xxxxxx, Teltel. No + 000 No. +000 000 00000, e-mail: xxxx@xxx.xxe-mail:xxxxxxx.xxxxxx@xxxxx.xx. The equipment purchased shall be intended for a set direct control electric chain hoists automatic film wrapping device for polyethylene extrusion line (1 set) (hereinafter – the Goods), the specifications of which are set out in the Technical Specification provided in Annex No. 1. In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. This Procurement is not divided into parts. Suppliers must submit their tenders for the entire scope of the Procurement. The Goods shall be delivered within a period no longer than 2 3 months from the day of signing the Procurement Contract. This term may be extended for a period not exceeding 2 months on the basis of a written mutual agreementagreement until 31/12/2023. The place for delivery - Plungės Tinklų g. 46b, LT-02300 VilniusPanevėžys. The Supplier participating in the Tendering Process must comply with the following minimum requirements for qualification:
Appears in 1 contract
Samples: Konkursas