Additional Provisions of the MTP Lease Sample Clauses

Additional Provisions of the MTP Lease. A. During any period in which (x) the MTP Landlord and the 000 Xxxxxxxx Xxxxxxxx are both affiliated with BPLP, and (y) Akamai is the tenant under both the 000 Xxxxxxxx Lease and the MTP Lease, if the 000 Xxxxxxxx Lease is terminated by the 000 Xxxxxxxx Xxxxxxxx due to a Casualty (as defined in the 000 Xxxxxxxx Lease), then Akamai shall also have the right to terminate the MTP Lease by written notice given to the MTP Landlord within twenty-five (25) business days after the 000 Xxxxxxxx Landlord's notice of termination of the 000 Xxxxxxxx Lease, such termination of the MTP Lease to be effective on a date certain specified by Akamai (the “Specified MTP Termination Date”) which shall be not less than nine (9) nor more than twenty-four (24) months after the effective date of the termination of the 000 Xxxxxxxx Lease. However, the foregoing provision entitling Akamai to terminate the MTP Lease shall not be binding on any lender that has taken possession (via foreclosure, deed in lieu of foreclosure, or other possessory interest granted by the mortgage) of the MTP Premises or any future purchaser of the MTP Building that is not affiliated with BPLP. B. As noted above, if the Must Take Premises are in the 000 Xxxxxxxx Xxxxxxxx, and if the 000 Xxxxxxxx Lease is terminated prior to the Commencement Date thereunder, then the MTP Lease shall immediately become null and void, but the provisions of the existing 000 Xxxxxxxx Lease and the 90 Broadway Lease shall remain in full force and effect in accordance with their terms. C. If the Must Take Premises are in either the 000 Xxxxxxxx Building or the Potential Future Building, and if the 000 Xxxxxxxx Lease is terminated by Akamai, or by the 145 Landlord pursuant to an Entitlement Condition Termination Right, prior to the Commencement Date thereunder, then Akamai shall have the option to terminate the MTP Lease, provided that (a) Akamai shall give the MTP Landlord written notice thereof within twenty-five (25) business days after the termination of the 000 Xxxxxxxx Lease, (b) the effective date of such termination shall be immediate if Akamai has not yet occupied the Must Take Premises, and two (2) years after the termination of the 000 Xxxxxxxx Lease if Akamai has occupied the Must Take Premises, and (c) Akamai shall pay a fee (“Termination Fee”) equal to the unamortized brokerage commission(s), if any, paid by the MTP Landlord plus the amount of tenant improvement allowance(s) paid by the MTP Landlord to Akamai or to th...
Sample 1
AutoNDA by SimpleDocs

Related to Additional Provisions of the MTP Lease

  • SPECIAL TERMS AND CONDITIONS OF TRUST The following special terms and conditions are hereby agreed to: 1. The Bonds listed in the Schedule hereto have been deposited in trust under this Trust Agreement. 2. The fractional undivided interest in and ownership of a Trust represented by each Unit thereof is a fractional amount, the numerator of which is one and the denominator of which is the amount set forth under "Summary of Essential Financial Information--General Information--Number of Units" in the Prospectus Part I for such Trust. 3. The aggregate number of Units described in Section 2.03(a) for a Trust is that number of Units set forth under "Summary of Essential Financial Information--General Information--Number of Units" in the Prospectus Part I for such Trust.

  • Final Provisions Clause 16

  • Other Definitional Provisions (a) Capitalized terms used herein and not otherwise defined herein have meanings assigned to them in the Indenture, or, if not defined therein, in the Trust Agreement. (b) All terms defined in this Agreement shall have the defined meanings when used in any instrument governed hereby and in any certificate or other document made or delivered pursuant hereto unless otherwise defined therein. (c) As used in this Agreement, in any instrument governed hereby and in any certificate or other document made or delivered pursuant hereto or thereto, accounting terms not defined in this Agreement or in any such instrument, certificate or other document, and accounting terms partly defined in this Agreement or in any such instrument, certificate or other document to the extent not defined, shall have the respective meanings given to them under generally accepted accounting principles as in effect on the date of this Agreement or any such instrument, certificate or other document, as applicable. To the extent that the definitions of accounting terms in this Agreement or in any such instrument, certificate or other document are inconsistent with the meanings of such terms under generally accepted accounting principles, the definitions contained in this Agreement or in any such instrument, certificate or other document shall control. (d) The words “hereof,” “herein,” “hereunder” and words of similar import when used in this Agreement shall refer to this Agreement as a whole and not to any particular provision of this Agreement; Section, Schedule and Exhibit references contained in this Agreement are references to Sections, Schedules and Exhibits in or to this Agreement unless otherwise specified; and the term “including” shall mean “including without limitation.” (e) The definitions contained in this Agreement are applicable to the singular as well as the plural forms of such terms and to the masculine as well as to the feminine and neuter genders of such terms. (f) Any agreement, instrument or statute defined or referred to herein or in any instrument or certificate delivered in connection herewith means such agreement, instrument or statute as from time to time amended, modified or supplemented and includes (in the case of agreements or instruments) references to all attachments thereto and instruments incorporated therein; references to a Person are also to its permitted successors and assigns.

  • Basic Lease Provisions and Definitions In addition to other terms elsewhere defined in this Lease, the following terms whenever used in this Lease should have only the meanings set forth in this Preamble, unless such meanings are expressly modified, limited or expanded elsewhere herein.

  • Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.

  • STANDARD TERMS AND CONDITIONS OF TRUST Subject to the provisions of Part II hereof, all the provisions contained in the Standard Terms and Conditions of Trust are herein incorporated by reference in their entirety and shall be deemed to be a part of this instrument as fully and to the same extent as though said provisions had been set forth in full in this instrument.

  • Definitional Provisions For purposes of this Agreement, (i) those words, names, or terms which are specifically defined herein shall have the meaning specifically ascribed to them; (ii) wherever from the context it appears appropriate, each term stated either in the singular or plural shall include the singular and plural; (iii) wherever from the context it appears appropriate, the masculine, feminine, or neuter gender, shall each include the others; (iv) the words “hereof”, “herein”, “hereunder”, and words of similar import, when used in this Agreement, shall refer to this Agreement as a whole, and not to any particular provision of this Agreement; (v) all references to “Dollars” or “$” shall be construed as being United States Dollars; (vi) the term “including” is not limiting and means “including without limitation”; and, (vii) all references to all statutes, statutory provisions, regulations, or similar administrative provisions shall be construed as a reference to such statute, statutory provision, regulation, or similar administrative provision as in force at the date of this Agreement and as may be subsequently amended.

  • Conditions to Obligations of Each Party to Effect the Merger The respective obligations of each party to this Agreement to effect the Merger shall be subject to the satisfaction at or prior to the Closing Date of the following conditions:

  • Other Definitional Provisions and Rules of Construction A. Any of the terms defined herein may, unless the context otherwise requires, be used in the singular or the plural, depending on the reference.

  • Additional Provisions The By-Laws may include further provisions for Shareholders' votes and meetings and related matters.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!