Common use of ADSL AND HDSL Clause in Contracts

ADSL AND HDSL. 9.2.1 The Parties acknowledge that ADSL is not currently deployed for use in the NYNEX network. If the issues surrounding deployment of ADSL in NYNEX's network are satisfactorily resolved and ADSL is deployed, NYNEX shall allow NEFC access ADSL Links unbundled from local switching and local transport in accordance with the terms and conditions set forth in this Section 9.0. 9.2.2 2-Wire ADSL-Compatible Link" or "ADSL 2W" is a transmission path that facilitates the transmission of up to a 6 Mbps digital signal downstream (toward the Customer) and up to a 640 Kbps digital signal upstream (away from the Customer) while simultaneously carrying an analog voice signal. An ADSL-2W is provided over a 2-Wire non-loaded twisted copper pair provisioned using revised resistance design guidelines and meeting ANSI Standard T1.413-1995-007R2. An ADSL-2W terminates 2-wire electrical interface at the Customer premises and at the NYNEX Central Office frame. ADSL technology can only be deployed over Links which extend less than 18 Kft. From NYNEX's Central Office. ADSL compatible Links will only be made available where existing copper facilities can meet the ANSI T1.413-1995-007R2 specifications. 9.2.3 2-Wire HDSL-Compatible Link" or "HDSL 2W" is a transmission path that facilitates the transmission of a 768 Kbps digital signal over a 2-Wire non-loaded twisted copper pair meeting the specifications in ANSI T1E1 Committee Technical Report Number 28 / T1E1.4/92-002R3. HDSL compatible Links will only be made available where existing copper facilities can meet the T1E1 Technical Report Number 28 specifications. 9.2.4 4-Wire HDSL-Compatible Link" or "HDSL 4W" is a transmission path that facilitates the transmission of a 1.544 Mbps digital signal over two 2-Wire non-loaded twisted copper pairs meeting the specifications in ANSI T1E1 Committee Technical Report Number 28. HDSL compatible Links will only be made available where existing copper facilities can meet the specifications. 9.2.5 HDSL and ADSL compatible links will be offered on the terms and conditions specified herein and on such other terms in applicable tariffs that are not inconsistent with the terms and conditions set forth herein. NYNEX shall make such links available to NEFC at rates approved by the PUC, as amended from time to time.

ADSL AND HDSL. 9.2.1 The Parties acknowledge that ADSL is not currently deployed for use in the NYNEX BA network. If the issues surrounding deployment of ADSL in NYNEXBA's network are satisfactorily resolved and ADSL is deployed, NYNEX BA shall allow NEFC FOCAL to access ADSL Links links unbundled from local switching and local transport in accordance with the terms and conditions set forth in this Section 9.09. 9.2.2 2-Wire ADSL-Compatible Link" or "ADSL 2W" is a transmission path that which facilitates the transmission of up to a 6 Mbps digital signal downstream (toward the Customer) and up to a 640 Kbps kpbs digital signal upstream (away from the Customer) while simultaneously carrying an analog voice signal. An ADSL-2W is provided over a 2-Wire non-non loaded twisted copper pair provisioned using revised resistance design guidelines and meeting ANSI Standard T1.413-T1.413- 1995-007R2. An ADSL-2W terminates in a 2-wire electrical interface at the Customer premises and at the NYNEX BA Central Office frame. ADSL technology can only be deployed over Links which extend less than 18 Kft. From NYNEXfrom BA's Central Office. .. ADSL compatible Links will are only be made available where existing copper facilities can meet the ANSI T1.413-1995-007R2 specifications. 9.2.3 2-Wire HDSL-Compatible Link" or "HDSL 2W" is a transmission path that which facilitates the transmission of a 768 Kbps digital signal over a 2-2- Wire non-loaded twisted copper pair meeting the specifications in ANSI T1E1 Committee Technical Report Number 28 / T1E1.4/92-002R3. HDSL compatible Links will are available only be made available where existing copper facilities can meet the T1E1 Technical Report Number 28 specifications. 9.2.4 4-Wire HDSL-Compatible Link" or "HDSL 4W" is a transmission path that which facilitates the transmission of a 1.544 Mbps digital signal over two 2-Wire non-loaded twisted copper pairs meeting the specifications in ANSI T1E1 Committee Technical Report Number 28. HDSL compatible Links will are available only be made available where existing copper facilities can meet the specifications. 9.2.5 HDSL and ADSL compatible links will be offered on the terms and conditions specified herein and on such other terms in applicable tariffs that are not inconsistent with the terms and conditions set forth herein. NYNEX BA shall make such links Links available to NEFC FOCAL at the rates approved specified by the PUCCommission, as amended from time to time, subject to the provisions of Section 9.9.

ADSL AND HDSL. 9.2.1 The Parties acknowledge that ADSL is not currently deployed for use in the NYNEX BA network. If the issues surrounding deployment of ADSL in NYNEXBA's network are satisfactorily resolved and ADSL is deployed, NYNEX BA shall allow NEFC HARVARDNET to access ADSL Links unbundled from local switching and local transport in accordance with the terms and conditions set forth in this Section 9.09.0 and pursuant to the development of BA technical requirements (e.g., TR72575). 9.2.2 2-Wire ADSL-Compatible Link" or "ADSL 2W" is a transmission path that which facilitates the transmission of up to a 6 Mbps digital signal downstream (toward the Customer) and up to approximately a 640 Kbps 1 Mbps digital signal upstream (away from the Customer) while simultaneously carrying an analog voice signal. An ADSL-2W is provided over a 2-Wire non-loaded twisted copper pair provisioned using revised resistance design guidelines and meeting ANSI Standard T1.413-1995-007R2guidelines. An ADSL-2W terminates in a 2-wire electrical interface at the Customer premises and at the NYNEX BA Central Office frame. ADSL technology can only be deployed over Links which extend less than 18 Kft. From NYNEX's Central Office. .. ADSL compatible Links will are only be made available where existing copper facilities can meet revised resistance guidelines. Equipment connecting to an ADSL-2W shall meet the ANSI T1.413-1995-007R2 specificationsPower Spectral Density mask specifications in T1 LB 652 or T1 LB 653. 9.2.3 2-Wire HDSL-Compatible Link" or "HDSL 2W" is a transmission path that which facilitates the transmission of a 768 Kbps digital signal over a 2-Wire non-loaded twisted copper pair meeting the specifications in ANSI T1E1 Committee Technical Report Number 28 / T1E1.4/92-002R3. HDSL compatible Links will are available only be made available where existing copper facilities can meet the T1E1 Technical Report Number 28 specifications. 9.2.4 4-Wire HDSL-Compatible Link" or "HDSL 4W" is a transmission path that which facilitates the transmission of a 1.544 Mbps digital signal over two 2-Wire non-loaded twisted copper pairs meeting the specifications in ANSI T1E1 Committee Technical Report Number 28. HDSL compatible Links will are available only be made available where existing copper facilities can meet the specifications. 9.2.5 HDSL and ADSL compatible links will be offered on the terms and conditions specified herein and on such other terms in applicable tariffs that are not inconsistent with the terms and conditions set forth herein. NYNEX BA shall make such links available to NEFC HARVARDNET at rates approved by the PUCDPU, as amended from time to time.

ADSL AND HDSL. 9.2.1 The Parties acknowledge that ADSL is not currently deployed for use in the NYNEX network. If the issues surrounding deployment of ADSL in NYNEX's ’s network are satisfactorily resolved and ADSL is deployed, NYNEX shall allow NEFC XXXXXX FIBER access ADSL Links unbundled from local switching and local transport in accordance with the terms and conditions set forth in this Section 9.0. 9.2.2 “2-Wire ADSL-Compatible Link" ” or "“ADSL 2W" ” is a transmission path that facilitates the transmission of up to a 6 Mbps digital signal downstream (toward the Customer) and up to a 640 Kbps digital signal upstream (away from the Customer) while simultaneously carrying an analog voice signal. An ADSL-2W is provided over a 2-Wire non-loaded twisted copper pair provisioned using revised resistance design guidelines and meeting ANSI Standard T1.413-1995-007R2. An ADSL-2W terminates 2-2- wire electrical interface at the Customer premises and at the NYNEX Central Office frame. ADSL technology can only be deployed over Links which extend less than 18 Kft. From NYNEX's ’s Central Office. ADSL compatible Links will only be made available where existing copper facilities can meet the ANSI T1.413-1995-007R2 specifications. 9.2.3 “2-Wire HDSL-Compatible Link" ” or "“HDSL 2W" ” is a transmission path that facilitates the transmission of a 768 Kbps digital signal over a 2-Wire non-loaded twisted copper pair meeting the specifications in ANSI T1E1 Committee Technical Report Number 28 / T1E1.4/92-002R3. HDSL compatible Links will only be made available where existing copper facilities can meet the T1E1 Technical Report Number 28 specifications. 9.2.4 “4-Wire HDSL-Compatible Link" ” or "“HDSL 4W" ” is a transmission path that facilitates the transmission of a 1.544 Mbps digital signal over two 2-Wire non-loaded twisted copper pairs meeting the specifications in ANSI T1E1 Committee Technical Report Number 28. HDSL compatible Links will only be made available where existing copper facilities can meet the specifications. 9.2.5 HDSL and ADSL compatible links will be offered on the terms and conditions specified herein and on such other terms in applicable tariffs that are not inconsistent with the terms and conditions set forth herein. NYNEX shall make such links available to NEFC XXXXXX FIBER at rates approved by the PUC, as amended from time to time.

ADSL AND HDSL. 9.2.1 The Parties acknowledge that ADSL is not currently deployed for use in the NYNEX BA-RI network. If the issues surrounding deployment of ADSL in NYNEX's BA- RI=s network are satisfactorily resolved and ADSL is deployed, NYNEX BA-RI shall allow NEFC Cox access to ADSL Links Loops unbundled from local switching and local transport in accordance with the terms and conditions set forth of this Agreement. For each of the unbundled 2-Wire ADSL-Compatible, 2-Wire HDSL- Compatible and 4-Wire HDSL-Compatible types of unbundled Local Loops, BA- RI will make such type of unbundled Local Loops available to Cox at each Central Office in this Section 9.0BA-RI’s service territory in Rhode Island no later than the date on which BA-RI provides an xDSL service that utilizes such Local Loop type to its customers at the Central Office. BA-RI shall provide to Cox 2-Wire ADSL- Compatible, 2-Wire HDSL-Compatible, and 4-Wire HDSL-Compatible unbundled Local Loops in an interval that is at parity with BA-RI’s provision of comparable facilities to its carrier or end user customers. 9.2.2 “2-Wire ADSL-Compatible Link" or "ADSL 2W" is Loop≅or ΑADSL 2W≅is a transmission path that facilitates the transmission of up to a 6 Mbps digital signal downstream (toward the Customer) and up to a 640 Kbps digital signal upstream (away from the Customer) while simultaneously carrying an analog voice signal. An ADSL-2W ADSL- 2W is provided over a 2-Wire non-loaded twisted copper pair provisioned using revised resistance design guidelines and meeting ANSI Standard T1.413-1995-1995- 007R2. An ADSL-2W terminates 2-wire Wire electrical interface at the Customer premises and at the NYNEX BA-RI Central Office frame. ADSL technology can only be deployed over Links Loops which extend less than 18 Kft. From NYNEX's BA-RI=s Central Office. ADSL compatible Links Loops will only be made available where existing copper facilities can meet the ANSI T1.413-1995-007R2 specifications. 9.2.3 “2-Wire HDSL-Compatible Link" or "HDSL 2W" is Loop≅or ΑHDSL 2W≅is a transmission path that facilitates the transmission of a 768 784 Kbps digital signal using the 2B1Q line code, over a 2-Wire non-loaded twisted copper pair meeting the specifications in ANSI T1E1 Committee Technical Report Number 28 / T1E1.4/92-002R328. HDSL compatible Links Loops will only be made available where existing copper facilities can meet the T1E1 Technical Report Number 28 specifications. 9.2.4 “4-Wire HDSL-Compatible Link" or "HDSL 4W" is Loop≅or ΑHDSL 4W≅is a transmission path that facilitates the transmission of a 1.544 Mbps digital signal over two 2-2- Wire non-loaded twisted copper pairs meeting the specifications in ANSI T1E1 Committee Technical Report Number 28. HDSL compatible Links Loops will only be made available where existing copper facilities can meet the specifications. 9.2.5 HDSL and ADSL compatible links Loops will be offered on the terms and conditions specified herein and on such other terms in applicable tariffs that are not inconsistent with the terms and conditions set forth herein. NYNEX BA-RI shall make such links Loops available to NEFC Cox at rates approved by the PUC, as amended from time to time.