Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents. 9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site. 9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.
Solicitations for Subcontracts Including Procurements of Materials and Equipment. In all solicitations either by competitive bidding or negotiation made by the Engineer for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor/subconsultant or supplier shall be notified by the Engineer of the Engineer's obligations under this Contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Solicitations for Subcontracts, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Engineer for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the Engineer of the Engineer's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin.
Provisions governing staff and subcontractors A. To require any subcontractor to execute documents that binds the subcontractor to comply with the provisions of this Contract. Subcontractor means an individual or entity to which the Contractor has contracted with or delegated some of its management functions or responsibilities of providing all or a part of the services required of the Contractor under this Contract. B. That it is responsible for the behavior of its staff and subcontractors to ensure a violence-free contractual relationship. The Contractor understands that any remarks, gestures or actions toward HHSC employees, volunteers or clients that carry an implied threat of any kind, even if intended to be in jest, will be taken seriously and may lead to corrective action, up to and including terminating this contractor. C. To comply with the requirements of the Immigration Reform and Control Act of 1986 regarding employment verification and retention of verification forms for an individual hired on or after November 6, 1986, who will perform any labor or services under this Contract. D. To certify and ensure that it utilizes and will continue to utilize, for the term of this Contract, the U. S. Department of Homeland Security's e- Verify system to determine the eligibility of: 1. all people employed during the Contract term to perform duties within Texas; and 2. all people (including subcontractors). E. That representatives of HHSC, AG-MFCU and HHS may conduct interviews of Contractor personnel, subcontractors and their personnel, witnesses, and clients without a Contractor's representative present unless the person interviewed voluntarily requests that the representative be present. The Contractor must not coerce its personnel, subcontractors and their personnel, witnesses, or clients to accept representation by the Contractor, and the Contractor agrees that no retaliation will occur to a person who denies the Contractor's offer of representation. Nothing in the Contract limits a person's right to counsel of his or her choice. Requests for interviews are to be complied with in the form and the manner requested. The Contractor must ensure by contract or other means that its personnel and subcontractors cooperate fully in any investigation conducted by representatives of HHSC, AG-MFCU and HHS. F. That if it is a Home and Community Support Services agency ("HCSSA"), the Contractor will hire Personal Assistance Services and Community Support Services providers chosen by the client or the client's legally authorized representative, if requested, and provided the individual who will provide the services: 1. meets minimum qualifications for the service; 2. is willing to be employed as an attendant by the Contractor; and 3. is willing, and determined competent by the Contractor, to deliver the service(s) according to the client's individual service plan.
What Are the Qualifications for Charitable Donations The Pension Protection Act of 2006 allows Xxxx XXX holders who are RMD age or older at the time of a distribution to annually exclude qualified charitable distribution amounts up to $100,000 per year from gross income. The provision was made permanent by the PATH Act of 2015. A qualified charitable distribution must be made payable directly to the qualified charity as described in Section 170(b) of the Internal Revenue Code. Distributions from SEP or SIMPLE IRAs do not qualify for this type of designation.
Motions for Directions (1) Class Counsel or the Settling Defendants may apply to the Ontario Court and/or such other courts as may be required by the Courts for directions in respect of the interpretation, implementation and administration of this Settlement Agreement. Unless the Courts order otherwise, motions for directions that do not relate specifically to the matters affecting the Quebec Action shall be determined by the Ontario Court. (2) All motions contemplated by this Settlement Agreement shall be on notice to the Parties.
Reservations for Registry Operations The following ASCII labels must be withheld from registration or allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: WWW, RDDS and WHOIS. The following ASCII label must be allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: NIC. Registry Operator may activate WWW, RDDS and WHOIS in the DNS, but must activate NIC in the DNS, as necessary for the operation of the TLD. None of WWW, RDDS, WHOIS or NIC may be released or registered to any person (other than Registry Operator) or third party. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD all such withheld or allocated names shall be transferred as specified by ICANN. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator may activate in the DNS at All Levels up to one hundred (100) names (plus their IDN variants, where applicable) necessary for the operation or the promotion of the TLD. Registry Operator must act as the Registered Name Holder of such names as that term is defined in the then-current ICANN Registrar Accreditation Agreement (RAA). These activations will be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator must either (i) register such names through an ICANN-accredited registrar; or (ii) self-allocate such names and with respect to those names submit to and be responsible to ICANN for compliance with ICANN Consensus Policies and the obligations set forth in Subsections 3.7.7.1 through 3.7.7.12 of the then-current RAA (or any other replacement clause setting out the terms of the registration agreement between a registrar and a registered name holder). At Registry Operator’s discretion and in compliance with all other terms of this Agreement, such names may be released for registration to another person or entity. Registry Operator may withhold from registration or allocate to Registry Operator names (including their IDN variants, where applicable) at All Levels in accordance with Section 2.6 of the Agreement. Such names may not be activated in the DNS, but may be released for registration to another person or entity at Registry Operator’s discretion. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names that remain withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Upon ICANN’s request, Registry Operator shall provide a listing of all names withheld or allocated to Registry Operator pursuant to Section 2.6 of the Agreement. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.
Third-Party Applications Oracle or third party providers may offer Third Party Applications. Except as expressly set forth in the Estimate/Order Form, Oracle does not warrant any such Third Party Applications, regardless of whether or not such Third Party Applications are provided by a third party that is a member of an Oracle partner program or otherwise designated by Oracle as “Built For NetSuite,” "certified," "approved" or “recommended.” Any procurement by Customer of such Third Party Applications or services is solely between Customer and the applicable third party provider. Customer may not use Third Party Applications to enter and/or submit transactions to be processed and/or stored in the Cloud Service, unless Customer has procured the applicable subscription to the Cloud Service for such use and access.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
