Common use of Archeological Background Studies Clause in Contracts

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study. d. For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. ) • The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. . • The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. . • Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements DocuSign Envelope ID: 5A2DC6EC-64DB-4A02-A984-B96FAAFF8279 PeopleSoft Contract No. 7490 Legacy Contract No. 12-7IDP5009 (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study. d. . • For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. . • To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. ) • The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. . • The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. . • Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study. d. . • For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. . • To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.. DocuSign Envelope ID: E7DAA847-BF7C-44E6-B32B-712DD5062C72

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. )  The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. .  The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Environmental Compliance Toolkit.  Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study. d. .  For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. .  To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.. DocuSign Envelope ID: FEE70723-A887-4BCC-92B5-33508013EFFC

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study.. DocuSign Envelope ID: F242F592-8716-4CB3-B7F2-54D1B859C58C d. For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. DocuSign Envelope ID: 81680129-218F-4A62-86EE-68C3C135A630 (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. ) • The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. . • The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Environmental Compliance Toolkit. • Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study. d. . • For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. . • To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. )  The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. .  The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Environmental Compliance Toolkit.  Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study. d. .  For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. .  To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.. DocuSign Envelope ID: B3F57688-319D-4340-876F-E11B399F9D4B

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. ) The Background Study shall must be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. . The Archeological Background Study shall must conform to the current Review Standard for Archeological Background Studies, available from the State.. DocuSign Envelope ID: B4E47CBB-54AA-4467-B86B-B1C47B94F45E c. a. Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives the preferred alternative selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall must consider the likely depth of impacts resulting from the proposed project. The location of all alternatives alternative selected for detailed study shall must be presented on a map or maps as part of the Archeological Background Study. d. . For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or and or the depth of impacts -- the Archeological Background Study shall must incorporate the previous study by reference and focus on the project changes. e. b. To conduct the Archeological Background Study, the professional archeologist shall must undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall must identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall must identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. )  The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. .  The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. .  Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study. d. .  For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. .  To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.. DocuSign Envelope ID: 32531276-D54D-42BA-B8CD-1FFE51D0946F

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study.. DocuSign Envelope ID: C4CEDECA-D2D9-45A1-BD15-E7F369C6A871 d. For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study.. DocuSign Envelope ID: F4473BF7-308E-4940-87F9-828A77C78A28 d. For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. ) • The Background Study shall must be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. . DocuSign Envelope ID: 9EFC6FE2-229E-4628-90C6-20E86398200F • The Archeological Background Study shall must conform to the current Review Standard for Archeological Background Studies, available from the State. c. Environmental Compliance Toolkit. • Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall must consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall must be presented on a map or maps as part of the Archeological Background Study. d. . • For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall must incorporate the previous study by reference and focus on the project changes. e. . • To conduct the Archeological Background Study, the Engineer’s professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall must identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall must identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall must identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.

Archeological Background Studies. (This scope is for the corresponding section(s) as listed in the Affected Environment and Environmental Consequences section of the EA.) a. The Background Study shall be produced by a professional archeologist as defined in 13 TAC §26.4(2). b. The Archeological Background Study shall conform to the current Review Standard for Archeological Background Studies, available from the State. c. Unless the Engineer has previously completed an Archeological Background Study for the project, the Archeological Background Study must define and consider all alternatives selected for detailed study, including all existing right of way, all proposed new right of way, easements (temporary and permanent), and any other project-specific location designated by the State. The Archeological Background study shall consider the likely depth of impacts resulting from the proposed project. The location of all alternatives selected for detailed study shall be presented on a map or maps as part of the Archeological Background Study.. DocuSign Envelope ID: EE5D87D9-3666-4B03-B13F-724FBCE94AAD d. For projects in which an Archeological Background Study has already been completed by the Engineer and the project has materially changed --affecting the project limits, proposed new right of way (if any), easements (if any), any other project-specific location designated by the State, and/or the depth of impacts -- the Archeological Background Study shall incorporate the previous study by reference and focus on the project changes. e. To conduct the Archeological Background Study, the professional archeologist shall undertake a review of existing data, including, but not limited to, the Texas Archeological Sites Atlas, geologic maps, soil maps, Potential Archeological Liability Map (PALM) of the project area (if applicable), aerial photographs, and historic maps. Based on this review, the Archeological Background Study shall identify and plot on a map the areas that require field investigation to evaluate the project’s effects on archeological resources and cemeteries and shall identify the areas in which the proposed project would have no effect on archeological resources and cemeteries. The Archeological Background Study shall identify any areas proposed for field investigation where impacts are deep, extending beyond three feet in depth.