Asphalt Binder Content Sample Clauses

Asphalt Binder Content. The Engineer may order or approve changes to 8 asphalt binder content. The maximum adjustment from the approved mix 9 design for the asphalt binder content shall be 0.3 percent 10 11 5-04.3(9)A Vacant 13 5-04.3(9)B Vacant 15 5-04.3(9)C Mixture Acceptance – Nonstatistical Evaluation 16 HMA mixture which is accepted by Nonstatistical Evaluation will be evaluated by the 17 Contracting Agency by dividing the HMA tonnage into lots. 18 20 A lot is represented by randomly selected samples of the same mix design that will be 21 tested for acceptance. A lot is defined as the total quantity of material or work produced 22 for each Job Mix Formula placed. Only one lot per JMF is expected. A sublot shall be 23 equal to one day’s production or 800 tons, whichever is less except that the final sublot 24 will be a minimum of 400 tons and may be increased to 1200 tons. 25
AutoNDA by SimpleDocs
Asphalt Binder Content. A sublot is defined as out of operational tolerance if either the Engineer’s or the Contractor’s test results exceed the values listed in Table 11. No production or placement payment adjustments greater than 1.000 will be paid for any sublot that is out of operational tolerance for asphalt binder content. Suspend production and shipment of the mixture if the Engineer’s or the Contractor’s asphalt binder content deviates from the current JMF by more than 0.5% for any sublot.
Asphalt Binder Content. The Engineer may order or approve changes to 14 asphalt binder content. The maximum adjustment from the approved mix 15 design for the asphalt binder content shall be 0.3 percent 16 18 19 5-04.3(9)B Vacant 22 HMA mixture which is accepted by Nonstatistical Evaluation will be evaluated by the 23 Contracting Agency by dividing the HMA tonnage into lots. 24 26 A lot is represented by randomly selected samples of the same mix design that will be 27 tested for acceptance. A lot is defined as the total quantity of material or work produced 28 for each Job Mix Formula placed. Only one lot per JMF is expected. A sublot shall be 29 equal to one day’s production or 800 tons, whichever is less except that the final sublot 30 will be a minimum of 400 tons and may be increased to 1200 tons. 31

Related to Asphalt Binder Content

  • User Content Certain areas of the Platform may enable you to post comments, send messages, correspond with others and/or otherwise post content (“User Content”) in connection with various features that Spectra may elect to offer, such as information libraries, e-mail service, bulletin boards, chatrooms, electronic postcards, chats with special guests, e-mails, and forums to communicate with others (“Message Features”). You must use the Message Features in a responsible manner and you are fully responsible for all User Content that you provide to us or others. Your License to Us. By submitting User Content, you grant us and our designees a royalty-free, irrevocable, perpetual, non-exclusive, worldwide, fully sub-licensable, transferable, license to publish, reproduce, distribute, display, perform, edit, adapt, modify, translate, create derivative works, make, sell, offer for sale, export, and otherwise use and exploit your User Content (or any portion thereof) in any way that we want and in any form, media, or technology now known or later developed. You hereby waive any moral rights you may have in your User Content in favor of Spectra and any of its designees. You represent that you have obtained all necessary permissions necessary to grant us those rights, including from any person identified in or implicated by your submission (including those shown in photographic content), and, in the case of minors, also from their parents or legal guardians, as appropriate. No Obligation to Publish. We are not obligated to publish, transmit or use your User Content. Spectra is not in any manner endorsing any User Content that it may publish or post on the Platform and cannot, and will not, vouch for its reliability. Spectra is not responsible for any User Content and has no duty to monitor User Content. You use any information contained in User Content at your own risk. Spectra and its designees have the right, in their sole discretion, to monitor, review, edit, remove, delete, disable, refuse, restrict, or terminate access to your User Content or the Platform (in whole or in part) at any time, without prior notice and in our sole discretion, for any or no reason. The obligations that you have to us under these Terms shall survive termination of the Platform, any use by you of the Platform, any User Content on the Platform, or these Terms. You will not continue to post any User Content that Spectra has previously advised you not to post.

  • Customer Content As part of the Services provided under this Agreement, Customer Data will be stored and processed in the data center region specified in the applicable Ordering Document. Axway shall not access Customer Content except in response to support or technical issues where Customer provides Axway with prior Customer’s written authorization required to access such Customer Content. Axway is not responsible for unauthorized access, alteration, theft or destruction of Customer Content arising from Customer’s own or its authorized users’ actions or omissions in contravention of the Documentation. Customer’s ability to recover any lost data resulting from Axway’s misconduct is limited to restoration by Axway from the most recent back-up.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where InterGlobe has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to InterGlobe. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for InterGlobe (e.g. hairpinning):

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CBB chooses to subtend a Verizon access Tandem, CBB’s NPA/NXX must be assigned by CBB to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG.

  • Integrated Digital Loop Carriers The feeder portion of some loops may be provide by means of Integrated Digital Loop Carrier (IDLC). IDLC provides a fiber optic cable transmission path that travels directly into BellSouth’s central office local switch. Where BellSouth uses IDLC ,if technically feasible and capacity does exist, BST will provide Al-Call with a Designed DS0 UVL by using alternative provisioning techniques including but not limited to such as “hairpinning” and DAC grooming. Alternative provisioning techniques will be provided at no additional cost to Al-Call . Hairpinning involves providing a DS0 signal from an IDLC-served loop to Al-Call ’s collocation equipment by using a dedicated pathway that traverses BellSouth’s central office switch. BellSouth will provide such DS0 signal to Al-Call by establishing a copper cross connect between the BellSouth switch and Al-Call ’s collocation equipment.

  • Software Components At any time during the contract period of performance, the Government may require the Contractor to remedy any failure of the software to comply with the requirements of this contract. Support shall consist of correction of errors, provision of modifications, improvements, and other products the original manufacturer makes available to the Government without charge. The Government shall also be provided full documentation of changes and/or modifications to the software provided to meet the Government's requirements.

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (DAMLs), and may have up to 6,000 feet of bridged tap between the End User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For Loops less than 18,000 feet and with less than 1300 Ohms resistance, the Loop will provide a voice grade transmission channel suitable for Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.

  • SOFTWARE PIRACY PROHIBITION State or other public funds payable under this Contract shall not be used for the acquisition, operation, or maintenance of computer software in violation of federal copyright laws or applicable licensing restrictions. Contractor hereby certifies and warrants that, during the term of this Contract and any extensions, Contractor has and shall maintain in place appropriate systems and controls to prevent such improper use of public funds. If the State determines that Contractor is in violation of this provision, the State may exercise any remedy available at law or in equity or under this Contract, including, without limitation, immediate termination of this Contract and any remedy consistent with federal copyright laws or applicable licensing restrictions.

  • Provisioning of High Frequency Spectrum and Splitter Space 3.2.1 BellSouth will provide <<customer_name>> with access to the High Frequency Spectrum as follows:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!