Common use of Buyer’s Responsibilities Clause in Contracts

Buyer’s Responsibilities. BUYER shall be responsible for the rigging, hoisting, assembly and installation of the Equipment. BUYER shall also be responsible for obtaining all authorizations and permits necessary to install, operate and maintain the Equipment and for paying all associated costs necessary for or relating to installation of the Equipment. BUYER shall also be responsible for obtaining interconnection approval from the local distribution utility, including obtaining any interconnection equipment required by the local utility that is not included on the attached Bixx xf Materials, and shall be responsible for conducting any required witness or other testing of the interconnection protection functionality. BUYER shall provide UTCP with all information requested in order to comply with OSHA and other applicable Employee, Health and Safety rules and regulations, including but not limited to information relating to the energy-control procedures applicable at the Equipment site under 29 CFR 1910.147 (The control of hazardous energy (lockout/tagout)). BUYER agrees that it will, prior to UTCP’s Initial Start-up mobilization, fully install the Equipment in conformance with UTCP’s installation requirements and guidelines. UTCP shall have provided current installation instructions and specifications to BUYER within thirty (30) days after the execution of this Agreement. Upon delivery of the units of Equipment, BUYER will be provided with an installation checklist summarizing certain steps required by BUYER prior to Initial Start-Up. BUYER acknowledges that the warranties of UTCP are not supplemented or amended by any such documents. BUYER shall provide UTCP with a completed installation checklist at least five (5) business days prior to the desired and agreed upon date to start the Initial Start-up and commissioning process. Notwithstanding the foregoing, in the event that UTCP mobilizes at BUYER’s request and the preparation is not complete, BUYER shall pay for remobilization, including travel, material, equipment and labor expenses.

Buyer’s Responsibilities. Unless separately contracted for with UTCP, BUYER shall be responsible for the rigging, hoisting, assembly and installation of the Equipment. BUYER shall also be responsible for obtaining all authorizations and permits necessary to install, operate and maintain accomplish the Equipment objectives set forth in this Agreement and for paying all associated costs costs, including those that are necessary for or relating to installation installation, use, operation and maintenance of the Equipment. BUYER shall also be responsible for obtaining interconnection approval from the local distribution utility, including obtaining any interconnection equipment required by the local utility that is not included on the attached Bixx xf Xxxx of Materials, and shall be responsible for conducting any required witness or other testing of the interconnection protection functionality. BUYER shall provide UTCP with all information requested in order to comply with OSHA and other applicable Employee, Health and Safety rules and regulations, including but not limited to information relating to the energy-control procedures applicable at the Equipment site under 29 CFR 1910.147 1910.147, (The control of hazardous energy (lockout/tagout)). BUYER agrees that it will, prior to UTCP’s Initial Start-up mobilization, fully install the Equipment in conformance with UTCP’s installation requirements and guidelines. UTCP shall have provided current installation instructions and specifications to BUYER within thirty (30) days after the execution of this Agreement. Upon delivery of the units of Equipment, BUYER will be provided with an installation checklist summarizing certain steps required by BUYER prior to Initial Start-Up. BUYER acknowledges that any such document is provided for informational purposes only, that no liability will accrue to UTCP based on such document and that all of the obligations and warranties of UTCP are solely as expressly provided herein and are not supplemented or amended by any such documentsdocument. BUYER shall provide UTCP with a completed installation checklist at least five (5) business days prior to the desired and agreed upon date to start the Initial Start-up and commissioning process. Notwithstanding the foregoing, in the event that UTCP mobilizes at BUYER’s request and the preparation is not complete, BUYER shall pay for remobilization, including travel, material, equipment and labor expenses.

Buyer’s Responsibilities. Unless separately contracted for with UTCP, BUYER shall be responsible for the rigging, hoisting, assembly and installation of the Equipment. BUYER shall also be responsible for obtaining all authorizations and permits necessary to install, operate and maintain accomplish the Equipment objectives set forth in this Agreement and for paying all associated costs costs, including those that are necessary for or relating to installation installation, use, operation and maintenance of the Equipment. BUYER shall also be responsible for obtaining interconnection approval from the local distribution utility, including obtaining any interconnection equipment required by the local utility that is not included on the attached Bixx xf Xxxx of Materials, and shall be responsible for conducting any required witness or other testing of the interconnection protection functionality. BUYER shall provide UTCP with all information requested in order to comply with OSHA and other applicable Employee, Health and Safety rules and regulations, including but not limited to information relating to the energy-control procedures applicable at the Equipment site under 29 CFR 1910.147 1910.147, (The control of hazardous energy (lockout/tagout)). BUYER agrees that it will, prior to UTCP’s 's Initial Start-up mobilization, fully install the Equipment in conformance with UTCP’s 's installation requirements and guidelines. UTCP shall have provided current installation instructions and specifications to BUYER within thirty (30) days after the execution of this Agreement. Upon delivery of the units of Equipment, BUYER will be provided with an installation checklist summarizing certain steps required by BUYER prior to Initial Start-Up. BUYER acknowledges that any such document is provided for informational purposes only, that no liability will accrue to UTCP based on such document and that all of the obligations and warranties of UTCP are solely as expressly provided herein and are not supplemented or amended by any such documentsdocument. BUYER shall provide UTCP with a completed installation checklist at least five (5) business days prior to the desired and agreed upon date to start the Initial Start-up and commissioning process. Notwithstanding the foregoing, in the event that UTCP mobilizes at BUYER’s 's request and the preparation is not complete, BUYER shall pay for remobilization, including travel, material, equipment and labor expenses.