We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

By Anthera Sample Clauses

By Anthera. Anthera shall indemnify, defend, and hold Lilly, Shionogi, and their respective directors, officers, employees, and Affiliates, harmless from and against any and all Damages incurred or suffered by each of them (excluding incidental or consequential Damages suffered or incurred by Lilly or Shionogi directly (as opposed to incidental or consequential Damages suffered or incurred by Third Parties who are, in turn, seeking the same from Lilly or Shionogi, which shall be covered by the indemnity set forth herein)) as a consequence of Third Party claims or actions (“Claims”) based on: (a) a breach of any of Anthera’s representations, warranties, or obligations contained in this Agreement; (b) the negligence, recklessness, or willful misconduct of Anthera, its Affiliates, or the employees or agents of Anthera or its Affiliates; and (c) the research, development, manufacture, sale and use of Compounds and Licensed Products by or on behalf of Anthera or its Affiliates, sublicensees, or assignees, and the importation, use, and sale of Compounds and Licensed Products by Anthera or its Affiliates, sublicensees, or assignees in the Territory, including, without limitation, all product liability or other claims for injury or death (“Product Liability Claims”) arising from the sale or use of Licensed Products sold by or on behalf of Anthera or its Affiliates, sublicensees, or assignees after the Effective Date, regardless of the theory under which such claims are brought. Anthera’s indemnification obligations under this Section 6.1 shall not apply to the extent that the applicable Claim arises out of or results from (i) a breach of any of Lilly’s or Shionogi’s representations, warranties, or obligations contained in this Agreement; (ii) the recklessness or intentional misconduct of Lilly, Shionogi, or their respective Affiliates, or the employees or agents of Lilly, Shionogi, or their respective Affiliates; provided, however, that this subsection (ii) shall not apply to Product Liability Claims; (iii) the practice of the Licensed Technology pursuant to Section 2.2 by or on behalf of Shionogi, Lilly, or their respective Affiliates, sublicensees, or assignees after the Effective Date; or (iv) the research, development, manufacture, and use of Compounds and Licensed Products by or on behalf of Shionogi or its Affiliates, sublicensees, or assignees, and the importation, use, and sale of Compounds and Licensed Products in Japan including, without limitation, all Product Liab...
Sample 1Sample 2See All (4)
By Anthera. Anthera represents and warrants to Lilly that: (a) As of the Effective Date, Anthera or its Affiliates shall have the full corporate and regulatory authority to own, hold and use the Regulatory Documents; (b) Anthera has not relied on any representation and warranty other than Lilly’s representations and warranties included in this Agreement. Anthera recognizes that neither Lilly nor its Affiliates, directors, employees, representatives, advisors or counsel shall be liable towards Anthera in connection with the transactions contemplated hereby in any respect, except as expressly provided for in this Agreement; (c) Anthera has not been debarred and is not subject to debarment pursuant to Section 306 of the FD&C Act, as amended, nor is it the subject of a conviction described in such Section; (d) Anthera is relying on its own investigation and analysis in entering into this Agreement. In connection with such investigation, Anthera has conducted such due diligence as it has determined to be necessary and advisable with respect to the Licensed Products, including the opportunity to ask questions of, and to request information from, Lilly. Anthera is knowledgeable about the pharmaceutical industry and is capable of evaluating the merits and risks of the transactions contemplated by this Agreement
Sample 1Sample 2

Related to By Anthera

  • Licensed Product The term “Licensed Product” shall mean any product (a) the manufacture, use, importation, sale or offer for sale of which would, in the absence of the license granted by this Agreement, infringe a Valid Claim of any of the Licensed Patent Rights, or (b) that is comprised of, utilizes or incorporates Licensed Biological Materials, or (c) that is discovered, developed or made using a Licensed Process.

  • Research Program The term “

  • Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.

  • Research Collaboration 3.7.1 Aarvik shall carry out the activities of each Work Item and deliver the required Data Package and/or deliverables in accordance with the applicable SOW. Without limiting the generality of the foregoing, Aarvik shall, in accordance with the applicable SOWs and the timeline approved by JRC, apply the Aarvik IP to (i) design and synthesize Collaboration Compounds, and (ii) by itself or through subcontractor(s), [***]. During the Research Term, if any Party identifies any Third Party Patent or Know-How that is necessary or reasonably useful for any activity under the SOWs but has not been included in the Aarvik IP, then such Party shall immediately inform the other Party and the Parties shall discuss in good faith the need of obtaining a license from such Third Party. 3.7.2 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver the Data Packages and all other deliverables required under the [***], as well as the results of the Patentability and FTO Analysis as described in Section 3.2.3, to ArriVent. ArriVent shall have the sole discretion to decide whether or not to advance any Collaboration Compound and which Collaboration Compound(s) will be advanced for further studies beyond the [***]. ArriVent shall inform Axxxxx of its decision in writing. If AxxxXxxx decides to advance the Collaboration Program to [***], ArriVent shall make the payment for the [***] pursuant to Section 6.2.1. 3.7.3 If, upon completion of the [***] for the Collaboration Program, AxxxXxxx decides not to advance the Collaboration Program to [***], ArriVent may terminate the Collaboration Program. If AxxxXxxx decides to advance the Collaboration Program to [***], ArriVent shall make the payment for the [***] pursuant to Section 6.2.1. 3.7.4 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver all Data Packages and deliverables required under the [***] to ArriVent. ArriVent shall have the sole discretion to decide whether or not to advance any Collaboration Compound and which Collaboration Compound(s) will be advanced for further studies beyond the [***]. ArriVent shall inform Axxxxx of its decision in writing. 3.7.5 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver all Data Packages and deliverables required under the [***] to ArriVent. 3.7.6 Within [***] ([***]) days after completion of the [***], Aarvik shall deliver to ArriVent a full report on all key results and findings of the Collaboration Program, and such other data, results and information as ArriVent may deem necessary for it to determine whether or not to exercise the Option (the “Full Report”).

  • Research Plan The Parties recognize that the Research Plan describes the collaborative research and development activities they will undertake and that interim research goals set forth in the Research Plan are good faith guidelines. Should events occur that require modification of these goals, then by mutual agreement the Parties can modify them through an amendment, according to Paragraph 13.6.

  • Manufacturing Technology Transfer Except as the Committee ------------ --------------------------------- may otherwise agree in writing, in order to effectuate an orderly transition of the uninterrupted availability of Product to LILLY for purposes contemplated under this Agreement, MEGABIOS, at least ninety (90) days prior to completion of the Project or completion of Phase I Clinical Trials, whichever is earlier, shall transfer to LILLY all information and instructions concerning the manufacturing process and related matters in MEGABIOS' possession which may be necessary for LILLY to manufacture Product (including information regarding obtaining necessary Lipids related thereto) for clinical trials and commercialization as contemplated hereunder including, but not limited to, analytical and manufacturing methods. MEGABIOS shall also provide assistance (in the form of consultation) to LILLY with respect to manufacturing matters for a period of [ * ] months after completion of the initial transfer of information and instructions as provided below. Such transfer and assistance by MEGABIOS will be referred to herein as the "Manufacturing Transfer." All such information, methods and instructions transferred to LILLY under this Section 4.3 shall be referred to herein as the "Manufacturing Information," and shall be maintained in confidence by LILLY pursuant to Section 7.1, except that LILLY's obligation to maintain in confidence such Manufacturing Information shall survive for ten (10) years following expiration or termination of this Agreement. LILLY agrees that it will use all such transferred Manufacturing Information only for the manufacture of the Products and shall not disclose or transfer such Manufacturing Information to any third party manufacturer except as provided in Section 2.10. MEGABIOS shall provide, and bear its costs for, up to [ * ] FTEs for a period of up to [ * ] months [ * ] in aggregate) to accomplish the Manufacturing Transfer. Such FTEs, at LILLY's request, shall include visits to LILLY's facilities by MEGABIOS personnel including up to [ * ] from MEGABIOS' head of manufacturing. MEGABIOS shall furnish any additional reasonable assistance beyond the assistance described above regarding manufacturing matters that LILLY may request and that MEGABIOS is able to provide, for up to [ * ] after the initial transfer of Manufacturing Information, providing that LILLY [ * ] incurred with respect to such additional assistance.

  • Development and Commercialization Subject to Sections 4.6 and 4.7, Fibrocell shall be solely responsible for the development and Commercialization of Fibrocell Products and Improved Products. Fibrocell shall be responsible for all costs incurred in connection with the Fibroblast Program except that Intrexon shall be responsible for the following: (a) costs of establishing manufacturing capabilities and facilities in connection with Intrexon’s manufacturing obligation under Section 4.6 (provided, however, that Intrexon may include an allocable portion of such costs, through depreciation and amortization, when calculating the Fully Loaded Cost of manufacturing a Fibrocell Product, to the extent such allocation, depreciation, and amortization is permitted by US GAAP, it being recognized that the majority of non-facilities scale-up costs cannot be capitalized and amortized under US GAAP); (b) costs of basic research with respect to the Intrexon Channel Technology and Intrexon Materials (i.e., platform improvements) but, for clarity, excluding research described in Section 4.7 or research requested by the JSC for the development of a Fibrocell Product or an Improved Product (which research costs shall be reimbursed by Fibrocell); (c) [*****]; and (d) costs of filing, prosecution and maintenance of Intrexon Patents. The costs encompassed within subsection (a) above shall include the scale-up of Intrexon Materials and related active pharmaceutical ingredients for clinical trials and Commercialization of Fibrocell Products undertaken pursuant to Section 4.6, which shall be at Intrexon’s cost whether it elects to conduct such efforts internally or through Third Party contractors retained by either Intrexon or Fibrocell (with Intrexon’s consent).

  • Licensee “Licensee” means the individual or company that has entered into an Agreement with the Embassy. “Offer” means a response to a solicitation that, if accepted, would bind the offeror to perform the resultant Agreement.

  • Commercialization Plan At such times as the JGC will deem appropriate, the JGC will direct the Parties to mutually prepare a Worldwide Commercialization Plan, and the JGC will review and approve such initial Worldwide Commercialization Plan. Thereafter, the JGC will have one or the other Party (or both) update the Worldwide Commercialization Plan each calendar year, and the JGC will review and approve any such update or any other amendment to the Worldwide Commercialization Plan. Notwithstanding anything in this CCPS Agreement to the contrary, the Parties acknowledge and agree that (i) Bluebird may decline to perform any Commercialization activity proposed to be conducted by Bluebird in the Worldwide Commercialization Plan (other than Manufacturing of Vectors and associated Payloads), and (ii) the Worldwide Commercialization Plan will not include, and Bluebird will have no obligation to perform, any such Commercialization activity that Bluebird has declined to perform, provided that once Bluebird has agreed to perform a Commercialization activity, it will be obligated to perform, and cannot decline to perform, such activity. In addition, either Party may request at any time that the JGC consider and approve other updates to the Worldwide Commercialization Plan. Further: (a) The JGC will set the required form and contents of the Worldwide Commercialization Plan. The Worldwide Commercialization Plan will reflect a singular marketing and sales approach worldwide, and will specify, among other things, the number of sales reps in the U.S. for each Party, allocation of regions in the U.S. for each Parties’ sales force, creation of marketing materials, planning for conferences, and other marketing activities. CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. (b) Neither Party (itself or by or through any others, including any Affiliates or Sublicensees) will take any material action regarding the Commercialization of Licensed Product unless described in the Worldwide Commercialization Plan or approved by the JGC. (c) All Commercialization of Licensed Product for U.S. Administration will be conducted under the supervision of the JGC and as part of the U.S. Development & Commercialization Program. (d) Celgene will have final decision making authority for all Commercialization activities worldwide, including timing of launch and pricing and the Worldwide Development Plan.

  • Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.

Most Referenced Clauses

Most Referenced Definitions