Common use of Caged Clause in Contracts

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCove’s expense, TelCove will arrange with a Supplier certified by BellSouth (BellSouth Certified Supplier) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRs) (Specifications), where technically feasible as that term has been defined by the FCC, prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliers. Where local building codes require enclosure specifications more stringent than BellSouth’s enclosure Specifications, TelCove and TelCove’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCove’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove and provide, at TelCove’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCove’s BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. TelCove’s BellSouth Certified Supplier shall xxxx TelCove directly for all work performed for TelCove pursuant to this Attachment. BellSouth shall have no liability for, nor responsibility to pay, such charges imposed by TelCove’s BellSouth Certified Supplier. Upon request, BellSouth shall construct the enclosure for KMC Data. 3.2.1 BellSouth may elect to review TelCove’s plans and specifications prior to allowing construction to start, to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove of its desire to execute this review in BellSouth’s response to the Initial Application, if TelCove has indicated its desire to construct its own enclosure. If TelCove’s Initial Application does not indicate its desire to construct its own enclosure, but its subsequent firm order does indicate its desire to construct its own enclosure, then notification to review will be given within ten (10) days after the Firm Order date. BellSouth shall complete its review within fifteen (15) days after the receipt of TelCove’s plans and specifications. Regardless of whether or not BellSouth elects to review TelCove’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that it is constructed according to TelCove’s submitted plans and specifications and/or BellSouth’s Specifications, as applicable. If BellSouth decides to inspect the constructed Collocation Space, BellSouth will complete its inspection within fifteen

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCoveDSLi’s expense, TelCove will DSLi may arrange with a Supplier certified by BellSouth (BellSouth “Certified Supplier”) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable guidelines and nondiscriminatory Technical References (TRs) (Specifications), where technically feasible as that term has been defined by the FCC, specifications prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersguidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure Specificationsspecification, TelCove DSLi and TelCoveDSLi’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCoveDSLi’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove DSLi and provide, at TelCoveDSLi’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications specifications required and necessary for TelCove’s BellSouth Certified Supplier DSLi to obtain the zoning, permits and/or other licenses. TelCoveDSLi’s BellSouth Certified Supplier shall xxxx TelCove DSLi directly for all work performed for TelCove DSLi pursuant to this Attachment. Attachment and BellSouth shall have no liability for, for nor responsibility to pay, pay such charges imposed by TelCovethe DSLi’s BellSouth Certified Supplier. DSLi must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access DSLi’s locked enclosure prior to notifying DSLi. Upon request, BellSouth shall construct the enclosure for KMC DataDSLi. 3.2.1 BellSouth may elect to review TelCoveDSLi’s plans and specifications prior to allowing construction to start, start to ensure compliance with BellSouth’s Specificationsguidelines and specifications. BellSouth will notify TelCove of its Notification to DSLi indicating BellSouth’s desire to execute this review will be provided in BellSouth’s response to the Initial Application, if TelCove DSLi has indicated its their desire to construct its their own enclosure. If TelCoveDSLi’s Initial Application Version 3Q01: 10/22/01 does not indicate its their desire to construct its their own enclosure, but its their subsequent firm order does indicate its their desire to construct its their own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. . BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCove’s the plans and specifications. Regardless of whether or not BellSouth elects to review TelCoveDSLi’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that make sure it is constructed according to TelCove’s the submitted plans and specifications and/or BellSouth’s Specificationsguidelines and specifications, as applicable. If BellSouth decides shall require DSLi to inspect the constructed Collocation Spaceremove or correct within seven (7) calendar days at DSLi’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth will complete its inspection within fifteenguidelines and specifications.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCoveDeltaCom’s expense, TelCove will DeltaCom may arrange with a Supplier certified by BellSouth (“BellSouth Certified Supplier”) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRsTR) (“Specifications), where technically feasible as that term has been defined by the FCC, ”) prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersupon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure Specificationsspecification, TelCove DeltaCom, if certified as a BellSouth Certified Supplier, and TelCoveDeltaCom’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCoveDeltaCom, if certified as a BellSouth Certified Supplier, or DeltaCom’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove DeltaCom and provide, at TelCoveDeltaCom’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCoveDeltaCom, if certified as a BellSouth Certified Supplier, or DeltaCom’s BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. TelCoveDeltaCom’s BellSouth Certified Supplier shall xxxx TelCove DeltaCom directly for all work performed for TelCove DeltaCom pursuant to this Attachment. Attachment and BellSouth shall have no liability for, for nor responsibility to pay, pay such charges imposed by TelCoveDeltaCom’s BellSouth Certified Supplier. DeltaCom must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access DeltaCom’s locked enclosure prior to notifying DeltaCom. Upon request, BellSouth shall construct the enclosure for KMC DataDeltaCom. 3.2.1 BellSouth may elect to review TelCoveDeltaCom’s plans and specifications prior to allowing construction to start, start to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove of its Notification to DeltaCom indicating BellSouth’s desire to execute this review will be provided in BellSouth’s response to the Initial Application, if TelCove DeltaCom has indicated its desire to construct its own enclosure. If TelCoveDeltaCom’s Initial Application does not indicate its desire to construct its own enclosure, but its subsequent firm order does indicate its desire to construct its own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCove’s the plans and specifications. Regardless of whether or not BellSouth elects to review TelCoveDeltaCom’s plans and specifications, BellSouth reserves the right to inspect the enclosure during and after construction has been completed to ensure that make sure it is constructed according to TelCove’s the submitted plans and specifications and/or and BellSouth’s Specifications, as applicable. If BellSouth decides to inspect the constructed Collocation Spaceinspect, BellSouth will complete its inspection within fifteenfifteen (15) calendar days after receipt of written notification of completion of the enclosure from DeltaCom. BellSouth shall require DeltaCom to remove or correct within fifteen (15) calendar days at DeltaCom’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth’s Specifications.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCoveTeleconex’s expense, TelCove will Teleconex may arrange with a Supplier certified by BellSouth (“BellSouth Certified Supplier”) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRs) (Specifications)enclosure, where technically feasible as that term has been defined by the FCC, in accordance with BellSouth’s Technical References (TR) (“Specifications”) prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersupon request. Where local building codes require enclosure specifications more stringent than BellSouth’s enclosure Specifications, TelCove and TelCove’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCoveTeleconex’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove Teleconex and provide, at TelCoveTeleconex’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCoveTeleconex’s BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. TelCoveTeleconex’s BellSouth Certified Supplier shall xxxx TelCove bill Teleconex directly for all work performed for TelCove Teleconex pursuant to this Attachment. Attachment and BellSouth shall have no liability for, for nor responsibility to pay, pay such charges imposed by TelCoveTeleconex’s BellSouth Certified Supplier. Teleconex must provide the local BellSouth Remote Site Location contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access Teleconex’s locked enclosure prior to notifying Teleconex at least forty-eight (48) hours before access to the Remote Site Location is required. Upon request, BellSouth shall construct the enclosure for KMC DataTeleconex. 3.2.1 BellSouth may elect to review TelCoveTeleconex’s plans and specifications prior to allowing construction to start, start to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove of its Notification to Teleconex indicating BellSouth’s desire to execute this review will be provided in BellSouth’s response to the Initial Application, if TelCove Teleconex has indicated its their desire to construct its their own enclosure. If TelCoveTeleconex’s Initial Application does not indicate its their desire to construct its their own enclosure, but its subsequent their firm order does indicate its their desire to construct its their own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCove’s the plans and specifications. Regardless of whether or not BellSouth elects to review TelCoveTeleconex’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that make sure it is constructed according to TelCove’s the submitted plans and specifications and/or BellSouth’s Specifications, as applicable. If BellSouth decides shall require Teleconex to inspect the constructed Collocation Spaceremove or correct within seven (7) calendar days at Teleconex’s expense any structure that does not meet these plans and specifications or, BellSouth will complete its inspection within fifteenwhere applicable, BellSouth’s Specifications.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCove’s GulfPines’ expense, TelCove GulfPines will arrange with a Supplier certified by BellSouth (BellSouth Certified Supplier) to construct a collocation arrangement Version 2Q03: 07/21/03 enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRs) (hereinafter referred to as Specifications), where technically feasible as that term has been defined by the FCC, ) prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersupon request. Where local building codes require enclosure specifications more stringent than BellSouth’s enclosure Specifications, TelCove GulfPines and TelCove’s GulfPines’ BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCove’s GulfPines’ BellSouth Certified Supplier shall be responsible for filing and receiving obtaining any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove GulfPines and provide, at TelCove’s GulfPines’ expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCove’s GulfPines’ BellSouth Certified Supplier to obtain the zoning, all necessary permits and/or other licenses. TelCove’s GulfPines’ BellSouth Certified Supplier shall xxxx TelCove GulfPines directly for all work performed for TelCove pursuant GulfPines to comply with this Attachment. BellSouth shall have no liability for, nor responsibility to pay, such charges imposed by TelCove’s GulfPines’ BellSouth Certified Supplier. GulfPines must provide the local BellSouth Central Office Building Contact with two (2) Access Keys that will allow entry into the locked enclosure. Except in the case of an emergency, BellSouth will not access GulfPines’ locked enclosure prior to notifying GulfPines at least forty-eight (48) hours or two (2) business days, whichever is greater, before access to the Collocation Space is required. Upon request, BellSouth shall construct the enclosure for KMC DataGulfPines. 3.2.1 BellSouth may elect to review TelCove’s GulfPines’ plans and specifications prior to allowing construction to start, to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove GulfPines of its desire to execute this review in BellSouth’s response to the Initial Application, if TelCove GulfPines has indicated its desire to construct its own enclosure. If TelCove’s GulfPines’ Initial Application does not indicate its desire to construct its own enclosure, but its subsequent firm order does indicate its desire to construct its own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order datedate the firm order has been received by BellSouth. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCove’s GulfPines’ plans and specifications. Regardless of whether or not BellSouth elects to review TelCove’s GulfPines’ plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that it is constructed according to TelCove’s GulfPines’ submitted plans and specifications and/or BellSouth’s Specifications, as applicable. If BellSouth decides to inspect the constructed Collocation Space, BellSouth will complete its inspection within fifteenfifteen (15) calendar days after receipt of written notification of completion of the enclosure from GulfPines. BellSouth shall require GulfPines to remove or correct within seven (7) calendar days, at GulfPines’ expense, any structure that does not meet GulfPines’ plans and specifications or BellSouth’s Specifications, as applicable.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCove’s GulfPines’ expense, TelCove will GulfPines may arrange with a Supplier certified by BellSouth (BellSouth Certified Supplier) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRs) (Specifications)enclosure, where technically feasible as that term has been defined by the FCC, in accordance with BellSouth’s Technical References (TR) (Specifications) prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersupon request. Where local building codes require enclosure specifications more stringent than BellSouth’s enclosure Specifications, TelCove and TelCove’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCove’s GulfPines’ BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove GulfPines and provide, at TelCove’s GulfPines’ expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCove’s GulfPines’ BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. TelCove’s GulfPines’ BellSouth Certified Supplier shall xxxx TelCove GulfPines directly for all work performed for TelCove GulfPines pursuant to this Attachment. Attachment and BellSouth shall have no liability for, for nor responsibility to pay, pay such charges imposed by TelCove’s GulfPines’ BellSouth Certified Supplier. GulfPines must provide the local BellSouth Remote Site Location contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access GulfPines’ locked enclosure prior to notifying GulfPines at least forty-eight (48) hours before access to the Remote Site Location is required. Upon request, BellSouth shall construct the enclosure for KMC DataGulfPines. 3.2.1 BellSouth may elect to review TelCove’s GulfPines’ plans and specifications prior to allowing construction to start, start to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove of its Notification to GulfPines indicating BellSouth’s desire to execute this review will be provided in BellSouth’s response to the Initial Application, if TelCove GulfPines has indicated its their desire to construct its their own enclosure. If TelCove’s Initial GulfPines’ Application does not indicate its their desire to construct its their own enclosure, but its subsequent their firm order does indicate its their desire to construct its their own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCove’s the plans and specifications. Regardless of whether or not BellSouth elects to review TelCove’s GulfPines’ plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that make sure it is constructed according to TelCove’s the submitted plans and specifications and/or BellSouth’s Specifications, as applicable. If BellSouth decides shall require GulfPines to inspect the constructed Collocation Spaceremove or correct within seven (7) calendar days at GulfPines’ expense any structure that does not meet these plans and specifications or, BellSouth will complete its inspection within fifteenwhere applicable, BellSouth’s Specifications.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCoveT-Mobile’s expense, TelCove will T-Mobile may arrange with a Supplier certified by BellSouth (BellSouth “Certified Supplier”) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable guidelines and nondiscriminatory Technical References (TRs) (Specifications), where technically feasible as that term has been defined by the FCC, specifications prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersguidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure Specificationsspecification, TelCove T-Mobile and TelCoveT-Mobile’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCoveT-Mobile’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove T-Mobile and provide, at TelCoveT-Mobile’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications specifications required and necessary for TelCove’s BellSouth Certified Supplier T-Mobile to obtain the zoning, permits and/or other licenses. TelCoveT-Mobile’s BellSouth Certified Supplier shall xxxx TelCove bill T-Mobile directly for all work performed for TelCove T-Mobile pursuant to this Attachment. Agreement and BellSouth shall have no liability for, for nor responsibility to pay, pay such charges imposed by TelCoveT-Mobile’s BellSouth Certified Supplier. T-Mobile must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access T-Mobile’s locked enclosure prior to notifying T-Mobile. Upon request, BellSouth shall construct the enclosure for KMC Data.T-Mobile 3.2.1 BellSouth may elect to review TelCoveT-Mobile’s plans and specifications prior to allowing construction to start, start to ensure compliance with BellSouth’s Specificationsguidelines and specifications. BellSouth will notify TelCove of its Notification to T-Mobile indicating BellSouth’s desire to execute this review will be provided in BellSouth’s response to the Initial Application, if TelCove T- Mobile has indicated its desire to construct its own enclosure. If TelCoveT-Mobile’s Initial Application does not indicate its desire to construct its own enclosure, but its subsequent firm order does indicate its desire to construct its own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCove’s the plans and specifications. Regardless of whether or not BellSouth elects to review TelCoveT-Mobile’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that make sure it is constructed according to TelCove’s the submitted plans and specifications and/or BellSouth’s Specificationsguidelines and specifications, as applicable. If BellSouth decides may require T-Mobile to inspect the constructed Collocation Spaceremove or correct within seven (7) calendar days at T-Mobile’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth will complete its inspection within fifteenguidelines and specifications.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCoveALCALL’s expense, TelCove ALCALL will arrange with a Supplier certified by BellSouth (BellSouth Certified Supplier) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRs) (hereinafter referred to as Specifications), where technically feasible as that term has been defined by the FCC, ) prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersupon request. Where local building codes require enclosure specifications more stringent than BellSouth’s enclosure Specifications, TelCove ALCALL and TelCoveALCALL’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCoveALCALL’s BellSouth Certified Supplier shall be responsible for filing and receiving obtaining any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove ALCALL and provide, at TelCoveALCALL’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCoveALCALL’s BellSouth Certified Supplier to obtain the zoning, all necessary permits and/or other licenses. TelCoveALCALL’s BellSouth Certified Supplier shall xxxx TelCove ALCALL directly for all work performed for TelCove pursuant ALCALL to comply with this Attachment. BellSouth shall have no liability for, nor responsibility to pay, such charges imposed by TelCoveALCALL’s BellSouth Certified Supplier. ALCALL must provide the local BellSouth Central Office Building Contact with two (2) Access Keys that will allow entry into the locked enclosure. Except in the case of an emergency, BellSouth will not access ALCALL’s locked enclosure prior to notifying ALCALL at least forty-eight (48) hours or two (2) business days, whichever is greater, before access to the Collocation Space is required. Upon request, BellSouth shall construct the enclosure for KMC DataALCALL. 3.2.1 BellSouth may elect to review TelCoveALCALL’s plans and specifications prior to allowing construction to start, to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove ALCALL of its desire to execute this review in BellSouth’s response to the Initial Application, if TelCove ALCALL has indicated its desire to construct its own enclosure. If TelCoveALCALL’s Initial Application does not indicate its desire to construct its own enclosure, but its subsequent firm order does indicate its desire to construct its own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order datedate the firm order has been received by BellSouth. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCoveALCALL’s plans and specifications. Regardless of whether or not BellSouth elects to review TelCoveALCALL’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that it is constructed according to TelCoveALCALL’s submitted plans and specifications and/or BellSouth’s Specifications, as applicable. If BellSouth decides to inspect the constructed Collocation Space, BellSouth will complete its inspection within fifteenfifteen (15) calendar days after receipt of Version 3Q03: 11/12/2003 written notification of completion of the enclosure from ALCALL. BellSouth shall require ALCALL to remove or correct within seven (7) calendar days, at ALCALL’s expense, any structure that does not meet ALCALL’s plans and specifications or BellSouth’s Specifications, as applicable.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCoveALCALL’s expense, TelCove will ALCALL may arrange with a Supplier certified by BellSouth (“BellSouth Certified Supplier”) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRs) (Specifications)enclosure, where technically feasible as that term has been defined by the FCC, in accordance with BellSouth’s Technical References (TR) (“Specifications”) prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersupon request. Where local building codes require enclosure specifications more stringent than BellSouth’s enclosure Specifications, TelCove and TelCove’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCoveALCALL’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove ALCALL and provide, at TelCoveALCALL’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCoveALCALL’s BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. TelCoveALCALL’s BellSouth Certified Supplier shall xxxx TelCove ALCALL directly for all work performed for TelCove ALCALL pursuant to this Attachment. Attachment and BellSouth shall have no liability for, for nor responsibility to pay, pay such charges imposed by TelCoveALCALL’s BellSouth Certified Supplier. ALCALL must provide the local BellSouth Remote Site Location contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access ALCALL’s locked enclosure prior to notifying ALCALL at least forty-eight (48) hours before access to the Remote Site Location is required. Upon request, BellSouth shall construct the enclosure for KMC DataALCALL. 3.2.1 BellSouth may elect to review TelCoveALCALL’s plans and specifications prior to allowing construction to start, start to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove of its Notification to ALCALL indicating BellSouth’s desire to execute this review will be provided in BellSouth’s response to the Initial Application, if TelCove ALCALL has indicated its their desire to construct its their own enclosure. If TelCoveALCALL’s Initial Application does not indicate its their desire to construct its their own enclosure, but its subsequent their firm order does indicate its their desire to construct its their own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCove’s the plans and specifications. Regardless of whether or not BellSouth elects to review TelCoveALCALL’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that make sure it is constructed according to TelCove’s the submitted plans and specifications and/or BellSouth’s Specifications, as applicable. If BellSouth decides shall require ALCALL to inspect the constructed Collocation Spaceremove or correct within seven (7) calendar days at ALCALL’s expense any structure that does not meet these plans and specifications or, BellSouth will complete its inspection within fifteenwhere applicable, BellSouth’s Specifications.

Caged. BellSouth will make caged collocation available in fifty (50) square foot increments, which should be sufficient enough, to collocate a single rack/bay of equipment. At TelCoveTeleconex’s expense, TelCove Teleconex will arrange with a Supplier certified by BellSouth (BellSouth Certified Supplier) to construct a collocation arrangement enclosure in accordance with BellSouth’s reasonable and nondiscriminatory Technical References (TRs) (Specifications), where technically feasible as that term has been defined by the FCC, ) prior to starting equipment installation. BellSouth will provide Specifications to its BellSouth Certified Suppliersupon request. Where local building codes require enclosure specifications more stringent than BellSouth’s enclosure Specifications, TelCove Teleconex and TelCoveTeleconex’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. TelCoveTeleconex’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with TelCove Teleconex and provide, at TelCoveTeleconex’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for TelCoveTeleconex’s BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. TelCoveTeleconex’s BellSouth Certified Supplier shall xxxx TelCove bill Teleconex directly for all work performed for TelCove Teleconex pursuant to this Attachment. BellSouth shall have no liability for, nor responsibility to pay, such charges imposed by TelCoveTeleconex’s BellSouth Certified Supplier. Teleconex must provide the local BellSouth Central Office building contact with two Access Keys that will Version 1Q03: 02/28/03 allow entry into the locked enclosure. Except in the case of an emergency, BellSouth will not access Teleconex’s locked enclosure prior to notifying Teleconex at least forty-eight (48) hours or two (2) business days, whichever is greater, before access to the Collocation Space is required. Upon request, BellSouth shall construct the enclosure for KMC DataTeleconex. 3.2.1 BellSouth may elect to review TelCoveTeleconex’s plans and specifications prior to allowing construction to start, to ensure compliance with BellSouth’s Specifications. BellSouth will notify TelCove Teleconex of its desire to execute this review in BellSouth’s response to the Initial Application, if TelCove Teleconex has indicated its desire to construct its own enclosure. If TelCoveTeleconex’s Initial Application does not indicate its desire to construct its own enclosure, but its subsequent firm order does indicate its desire to construct its own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of TelCoveTeleconex’s plans and specifications. Regardless of whether or not BellSouth elects to review TelCoveTeleconex’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction has been completed to ensure that it is constructed according to TelCoveTeleconex’s submitted plans and specifications and/or BellSouth’s Specifications, as applicable. If BellSouth decides to inspect the constructed Collocation Space, BellSouth will complete its inspection within fifteenfifteen (15) calendar days after receipt of written notification of completion of the enclosure from Teleconex. BellSouth shall require Teleconex to remove or correct within seven (7) calendar days, at Teleconex’s expense, any structure that does not meet Teleconex’s plans and specifications or BellSouth’s Specifications, if applicable.