CAPABILITIES AND CAPACITIES Sample Clauses

CAPABILITIES AND CAPACITIES. The product specifications set forth below specify normal operating specifications and, accordingly, the parties agree that delivery of Product not meeting the indicated specifications shall not be deemed a breach by BOC and BOC shall not be required to shut down the BOC Plant unless Coffeyville Resources expressly instructs BOC to do so in writing.* From time to time Coffeyville Resources may instruct BOC to decrease the normal operating specifications for Product by written notice, accepted by BOC. *except as otherwise set forth below for Nitrogen Product
AutoNDA by SimpleDocs
CAPABILITIES AND CAPACITIES. This paragraph 5 sets out the current plan for investments to be made in (among other things) capability and capacity, supporting the sales of the Beverages during the Term:

Related to CAPABILITIES AND CAPACITIES

  • Power and Capacity The Shareholder has the power, authority and capacity to enter into this Agreement and to consummate the transactions contemplated hereby. This Agreement constitutes the Shareholder’s valid, legal and binding obligation and is enforceable against the Shareholder in accordance with its terms, subject, however, as to enforcement, to bankruptcy, insolvency, fraudulent transfer, moratorium and similar laws of general applicability relating to or affecting creditors’ rights;

  • Corporate Capacity The Acquirer has the corporate power, capacity and authority to enter into and complete this Agreement;

  • Contract Capacity The electric power producing capability of the Generating Facility which is committed to Edison.

  • FREQUENCY AND CAPACITY LEVELS No restriction on frequency, capacity or aircraft type.

  • INDEPENDENT CAPACITY The employees or agents of each party who are engaged in the performance of this Agreement shall continue to be employees or agents of that party and shall not be considered for any purpose to be employees or agents of the other party.

  • Capabilities A. The Parties agree that the DRE must possess the legal, technical, and financial capacity to: (1) Accept and expend non-federal funds consistent with Section 4.2.4; (2) Accept transfer of the FERC license and title for the Facilities from PacifiCorp; (3) Seek and obtain necessary permits and other authorizations to implement Facilities Removal; (4) Enter into appropriate contracts and grant agreements for effectuating Facilities Removal; (5) Perform, directly or by oversight, Facilities Removal; (6) Prevent, mitigate, and respond to damages the DRE or any of its contractors, subcontractors, or assigns cause during the course of Facilities Removal, and, consistent with Applicable Law, respond to and defend associated liability claims against the DRE or any of its contractors, subcontractors, or assigns, including costs thereof and any judgments or awards resulting therefrom; (7) Carry the required insurance and bonding set forth in Appendix L to respond to liability and damages claims associated with Facilities Removal against the DRE or any of its contractors, subcontractors, or assigns; (8) Meet the deadlines set forth in Exhibit 4; and (9) Perform such other tasks as are reasonable and necessary for Facilities Removal. B. Before the DRE and PacifiCorp file the joint application to transfer the license for the Facilities, the DRE will Timely demonstrate to the reasonable satisfaction of the States and PacifiCorp that it possesses the legal, technical, and financial capacity to accomplish the tasks in Sections 7.1.2.A(1) through (5), (8), and (9). PacifiCorp and the States will consult if the DRE fails to make the demonstration required in this subsection. C. Within six months of the DRE’s execution of the Settlement, the DRE will include in an informational filing in the FERC license transfer proceeding proof that it possesses the legal, technical, and financial capacity to accomplish the tasks in Sections 7.1.2.A(6) and (7). This filing will include documentation that the DRE meets the requirements of Parts II, III, and IV of Appendix L and is capable of fulfilling its obligations under Section 7.1.3. The DRE will not provide the filing if either of the States or PacifiCorp objects to the filing after a reasonable opportunity to review before submission to FERC. The six-month deadline may be changed by agreement of the DRE, the States, and PacifiCorp. The Parties will Meet and Confer if the DRE fails to provide the informational filing to FERC.

  • Financial Capacity (a) Taking into account the Financing Commitment, such Purchaser has, and at the Closing will have, sufficient resources to pay, in cash any and all amounts necessary for it to consummate the transactions contemplated hereby at the Closing, including payment of its Pro Rata Share of the Seller Purchase Price and the Company Purchase Price, and in the case of Purchaser A only, the Additional Company Purchase Price and the Election Purchase Price (to the extent payable hereunder) and all the fees and expenses expressly required to be paid by such Purchaser hereunder without any restrictions to transfer such funds at Closing to the Seller and the Company, as and to the extent required to be paid pursuant to, and subject to the terms of, this Agreement. The Sponsor affiliated with such Purchaser has, and at the Closing will have, sufficient resources to meet its obligations under its Commitment Letter as they become due. (b) As of the date of this Agreement, such Purchaser has delivered to the Seller a true, correct and complete copy of the Commitment Letter provided by its affiliated Sponsor, dated as of the date hereof. Such Commitment Letter has not been amended or modified, and the respective commitments contained in such Commitment Letter have not been withdrawn, terminated or rescinded. Such Commitment Letter (i) is in full force and effect, (ii) constitutes the legal, valid and binding obligation of such Purchaser and the Sponsor party thereto, and (iii) is enforceable by the Seller and the Company against such Purchaser and the Sponsor party thereto, in accordance with its terms, subject to bankruptcy, insolvency, reorganization and other Legal Requirements of general applicability relating to or affecting creditors’ rights and to general equity principles. There are no side letters or other Contracts related to the funding or investing, as applicable, of the applicable Financing Commitment other than such Commitment Letter. There are no conditions precedent to the consummation of such Financing Commitment other than those set forth in such Commitment Letter. As of the date of this Agreement, the Sponsor affiliated with such Purchaser is not subject to bankruptcy proceedings. (c) Notwithstanding anything to the contrary contained herein, in no event shall this Section 4.4 be deemed breached (and no condition set forth in Section 6.3 shall be deemed to have failed as a result of any actual or alleged breach of this Section 4.4), if (notwithstanding any actual or alleged breach), such Purchaser is willing and able to consummate its obligations at the Closing if and when it is otherwise required to do so under the terms and conditions of this Agreement.

  • Financial Capability At Closing, the Investor will have available funds necessary to consummate the Closing on the terms and conditions contemplated by this Agreement and has the ability to bear the economic risks of its prospective investment in the Purchased Shares and can afford the complete loss of such investment.

  • Testing Capabilities 7.2.2.10.2.1 LIS Acceptance Testing is provided where equipment is available, with the following test lines: seven-digit access to balance (100 type), milliwatt (102 type), nonsynchronous or synchronous, automatic transmission measuring (105 type), data transmission (107 type), loop-around, short circuit, open circuit, and non-inverting digital loop-back (108 type), and such other acceptance testing that may be needed to ensure that the service is operational and meets the applicable technical parameters. 7.2.2.10.2.2 In addition to LIS acceptance testing, other tests are available (e.g., additional cooperative acceptance testing, automatic scheduled testing, cooperative scheduled testing, manual scheduled testing, and non-scheduled testing). Charges for such testing are identified in Section 7.3.5.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!