Contract Transition Upon Contract expiration or termination, the Contractor shall ensure a seamless transfer of Contract responsibilities with any subsequent Contractor necessary to transition the Products and services of the Contract. The incumbent Contractor assumes all expenses related to the contract transition.
Transfer Timing (A) The final paragraph of Paragraph 3(a) shall be deleted and replaced with the following: “Subject to Paragraph 4, and unless otherwise specified, any transfer of Eligible Credit Support or Equivalent Credit Support (whether by the Transferor pursuant to Paragraph 2(a) or by the Transferee pursuant to Paragraph 2(b)) shall be made not later than the close of business on the Settlement Day.”
(B) The definition of Settlement Day shall be deleted and replaced with the following: “Settlement Day” means the next Local Business Day after the Demand Date”.
Vendor's Years in Business How many years has the business submitting this proposal been operating in its current capacity and field of work?
Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions.
(b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.
Transferred Assets (i) From the Closing Date to the Effective Date, OLS sold and/or contributed, assigned, transferred, and conveyed to the Depositor, and the Depositor acquired from OLS, without recourse except as provided under the Original Receivables Sale Agreement, all of OLS’s right, title and interest, whether now owned or hereafter acquired, in, to and under each Receivable (1) in existence on the Closing Date and in existence on any Business Day after the Closing Date and prior to the Effective Date that is listed as a “Designated Servicing Agreement” on the Designated Servicing Agreement Schedule as of the date such Receivable is created (the “Initial Receivables”), and (2) all monies due or to become due and all amounts received or receivable with respect thereto and all proceeds (including “proceeds” as defined in the Uniform Commercial Code in effect in all applicable jurisdictions (the “UCC”)), together with all rights of OLS to enforce such Initial Receivables (collectively, the “Original Transferred Assets”).
(ii) Commencing on the Effective Date, and until the opening of business on the MSR Transfer Date for each Designated Servicing Agreement, pursuant to the Purchase Agreement, OLS will sell to HLSS, for a cash purchase price equal to 100% of the Receivable Balances thereof, (1) each Receivable, in existence on any Business Day on or after the Effective Date and until the opening of business on the related MSR Transfer Date, that arises under any Servicing Agreement that is listed as a “Designated Servicing Agreement” on the Designated Servicing Agreement Schedule as of the date such Receivable is created (“OLS Additional Receivables”) for which the MSR Transfer Date has not yet occurred, and (2) all monies due or to become due and all amounts received or receivable with respect thereto and all proceeds (including “proceeds” as defined in the UCC), together with all rights of HLSS to enforce such OLS Additional Receivables (collectively, the “OLS Transferred Assets”).
(iii) Commencing on the Effective Date, and until the close of business on the Receivables Sale Termination Date, subject to the provisions of this Agreement, HLSS, as receivables seller, hereby sells and/or contributes, assigns, transfers, and conveys to the Depositor, and the Depositor acquires from HLSS, without recourse except as provided herein, all of HLSS’s right, title and interest, whether now owned or hereafter acquired, in, to and under (1) each Receivable in existence on any Business Day on or after the Effective Date and prior to the Receivables Sale Termination Date (including the OLS Additional Receivables) that arises under any Servicing Agreement that is listed as a “Designated Servicing Agreement” on the Designated Servicing Agreement Schedule as of the date such Receivable is created (“Additional Receivables”), and (2) all monies due or to become due and all amounts received or receivable with respect thereto and all proceeds (including “proceeds” as defined in the UCC) (including the OLS Transferred Assets), together with all rights of HLSS to enforce such Additional Receivables (collectively, the “Transferred Assets”). Until the Receivables Sale Termination Date, HLSS shall, automatically and without any further action on its part, sell and/or contribute, assign, transfer and convey to the Depositor, on each Business Day, each Additional Receivable not previously transferred to the Depositor and the Depositor shall purchase each such Additional Receivable together with all of the other Transferred Assets related to such Receivable.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Freedom has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Freedom. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Freedom (e.g. hairpinning):
1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises.
2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated.
3. If capacity exists, provide "side-door" porting through the switch.
4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch).
2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases.
2.6.3 If no alternate facility is available, and upon request from Freedom, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Freedom will then have the option of paying the one-time SC rates to place the Loop.
Certification as Small Contractor or Minority Business Enterprise This paragraph was intentionally left blank.
Complete Work without Extra Cost Except to the extent otherwise specifically stated in this contract, the Contractor shall obtain and provide, without additional cost to the City, all labor, materials, equipment, transportation, facilities, services, permits, and licenses necessary to perform the Work.
Initial Business Combination/Distribution Procedure The Company may consummate the Initial Business Combination and conduct redemptions of Common Stock for cash upon consummation of such Initial Business Combination without a stockholder vote pursuant to Rule 13e-4 and Regulation 14E of the Exchange Act, including the filing of tender offer documents with the Commission. Such tender offer documents will contain substantially the same financial and other information about the Initial Business Combination and the redemption rights as is required under the Commission’s proxy rules and will provide each stockholder of the Company with the opportunity prior to the consummation of the Initial Business Combination to redeem the Common Stock held by such stockholder for an amount of cash equal to (A) the aggregate amount then on deposit in the Trust Account as of two Business Days prior to the consummation of the Initial Business Combination representing (x) the proceeds held in the Trust Account from the Offering and the sale of the Private Placement Warrants and (y) any interest, divided by (B) the total number of Public Shares then outstanding. In the event the Company conducts redemptions pursuant to the tender offer rules, the Company’s offer to redeem will remain open for at least 20 Business Days, in accordance with Rule 14e-1(a) under the Exchange Act, and the Company will not be permitted to complete the Initial Business Combination until the expiration of the tender offer period. If, however, the Company elects not to file such tender offer documents, a stockholder vote is required by law or stock exchange listing requirement in connection with the Initial Business Combination, or the Company decides to hold a stockholder vote for business or other legal reasons, the Company will submit such Initial Business Combination to the Company’s stockholders for their approval (“Business Combination Vote”). The company will give not less than 10 days nor more than 60 days prior written notice of any such meeting, if required, at which a Business Combination Vote shall be taken. With respect to the Business Combination Vote, the Sponsor and the Company’s initial stockholders, executive officers and directors have agreed to vote all of their Founder Shares and Public Shares in favor of the Company’s initial Business Combination. If the Company seeks stockholder approval of the Initial Business Combination, the Company will offer to each Public Stockholder holding shares of Common Stock the right to have its shares redeemed in conjunction with a proxy solicitation pursuant to the proxy rules of the Commission at a per share redemption price (the “Redemption Price”) equal to (I) the aggregate amount then on deposit in the Trust Account as of two Business Days prior to the consummation of the Initial Business Combination representing (1) the proceeds held in the Trust Account from the Offering and the sale of the Private Placement Warrants and (2) any interest, divided by (II) the total number of Public Shares then outstanding. The Company may proceed with such Initial Business Combination only if a majority of the shares voted are voted to approve such Initial Business Combination. If, after seeking and receiving such stockholder approval, the Company elects to so proceed, it will redeem shares, at the Redemption Price, from those Public Stockholders who affirmatively requested such redemption. Only Public Stockholders holding Common Stock who properly exercise their redemption rights, in accordance with the applicable tender offer or proxy materials related to such Initial Business Combination, shall be entitled to receive distributions from the Trust Account in connection with an Initial Business Combination, and the Company shall pay no distributions with respect to any other holders or shares of capital stock of the Company in connection therewith. In the event that the Company does not effect an Initial Business Combination within the time period set forth in the Amended and Restated Certificate of Incorporation, the Company will (i) cease all operations except for the purpose of winding up, (ii) as promptly as reasonably possible but not more than ten (10) Business Days thereafter, redeem 100% of the Public Shares, at a per-share price, payable in cash, equal to the aggregate amount then on deposit in the Trust Account, including any interest (which shall be net of amounts withdrawn to pay taxes and up to $100,000 of interest to pay dissolution expenses), divided by the number of then outstanding Public Shares, which redemption will completely extinguish Public Stockholders’ rights as stockholders (including the right to receive further liquidation distributions, if any), subject to applicable law, and (iii) as promptly as reasonably possible following such redemption, subject to the approval of the Company’s remaining stockholders and the Company’s board of directors, dissolve and liquidate, subject in each case to the Company’s obligations under Delaware law to provide for claims of creditors and the requirements of other applicable law. Only Public Stockholders holding Common Stock included in the Securities shall be entitled to receive such redemption amounts and the Company shall pay no such redemption amounts or any distributions in liquidation with respect to any other shares of capital stock of the Company. The Company will not propose any amendment to the Amended and Restated Certificate of Incorporation to modify the substance or timing of the Company’s obligation to provide for the redemption of the Public Shares in connection with an Initial Business Combination or to redeem 100% of its Public Shares if it does not complete its initial business combination within the time period set forth in the Amended and Restated Certificate of Incorporation, unless it provides its public stockholders with the opportunity to redeem their shares of Class A common stock upon approval of any such amendment, as described in the Statutory Prospectus and Prospectus.
Manufacturing Technology Transfer Except as the Committee ------------ --------------------------------- may otherwise agree in writing, in order to effectuate an orderly transition of the uninterrupted availability of Product to LILLY for purposes contemplated under this Agreement, MEGABIOS, at least ninety (90) days prior to completion of the Project or completion of Phase I Clinical Trials, whichever is earlier, shall transfer to LILLY all information and instructions concerning the manufacturing process and related matters in MEGABIOS' possession which may be necessary for LILLY to manufacture Product (including information regarding obtaining necessary Lipids related thereto) for clinical trials and commercialization as contemplated hereunder including, but not limited to, analytical and manufacturing methods. MEGABIOS shall also provide assistance (in the form of consultation) to LILLY with respect to manufacturing matters for a period of [ * ] months after completion of the initial transfer of information and instructions as provided below. Such transfer and assistance by MEGABIOS will be referred to herein as the "Manufacturing Transfer." All such information, methods and instructions transferred to LILLY under this Section 4.3 shall be referred to herein as the "Manufacturing Information," and shall be maintained in confidence by LILLY pursuant to Section 7.1, except that LILLY's obligation to maintain in confidence such Manufacturing Information shall survive for ten (10) years following expiration or termination of this Agreement. LILLY agrees that it will use all such transferred Manufacturing Information only for the manufacture of the Products and shall not disclose or transfer such Manufacturing Information to any third party manufacturer except as provided in Section 2.10. MEGABIOS shall provide, and bear its costs for, up to [ * ] FTEs for a period of up to [ * ] months [ * ] in aggregate) to accomplish the Manufacturing Transfer. Such FTEs, at LILLY's request, shall include visits to LILLY's facilities by MEGABIOS personnel including up to [ * ] from MEGABIOS' head of manufacturing. MEGABIOS shall furnish any additional reasonable assistance beyond the assistance described above regarding manufacturing matters that LILLY may request and that MEGABIOS is able to provide, for up to [ * ] after the initial transfer of Manufacturing Information, providing that LILLY [ * ] incurred with respect to such additional assistance.
