Condition Codes Sample Clauses

Condition Codes. The ConditionCode field of a General TD is updated after every attempted transaction, whether successful or not. If the transaction was successful, then the ConditionCode field is set to NOERROR. Otherwise, it is set according to the error type.
AutoNDA by SimpleDocs
Condition Codes. The following condition codes are used within the various document types to indicate the basic point size, leading and formatting of the material subject to the codes. The Contractor shall supply and test all necessary software to interpret the condition codes as described below in this Contract. The relationships between the various condition codes are set out in “(6) Keeps and Releases” below: +A controls line containing “TITLE” and Title number. Drops line down 5 picas, + or – 12 points, from top of page. Sets line 10/11 roman; @A turns off this code; +B controls each line of Title name. Spaces down 12 points from Title number line and sets title name 10/11 bold; @B turns off this code; +U controls 7 point asterisked footnotes and cross-references which may be attached to Title number. Sets text 7/8 roman. ^T+n^ codes (where “n” equals a specific number of lines) must translate to the indicated number of 7 point variable lines of leading. Each blank line must translate to a 7 point variable line of leading; @U turns off this code; +V same as “+U”; @V turns off this code; +D controls line containing “CHAPTER” or “ARTICLE” and the Chapter or Article number. Spaces line down 2 picas, + or – 6 points, from preceding line of text except when Chapter or Article starts on a new page, in which case the line is not spaced down. Sets line 10/11 roman; @D turns off this code; +E controls each line of Chapter or Article name. Spaces down 12 points from Chapter or Article number line and sets name 10/11 bold; @E turns off this code; +U controls 7 point asterisked footnotes and cross-references which may be attached to Chapter or Article number. Sets text 7/8 roman. ^T+n^ codes (where “n” equals a specific number of lines) must translate to the indicated number of 7 point variable lines of leading. Each blank line must translate to a 7 point variable line of leading; @U turns off this code; +V same as “+U”; @V turns off this code;
Condition Codes. Conditions data are not collected for Other Medical events; therefore, this file cannot be linked to the Conditions File.
Condition Codes. The condition code(s) of the material covered by this order are defined as follows: CODE DESCRIPTION 1 or New Indicates newly manufactured or new surplus material never used or before installed on next higher assembly. 2 or OHC Indicated material FAA Certified as serviceable which has undergone overhaul and has zero time of use since said overhaul.

Related to Condition Codes

  • GENERAL COVENANTS, CONDITIONS AND AGREEMENTS The Company hereby further covenants and agrees with each Purchaser as follows:

  • Certain Calculations and Tests (a) Notwithstanding anything to the contrary herein, but subject to Sections 1.10(b) and (c) and Section 1.11, all financial ratios and tests (including the Total Leverage Ratio, the First Lien Leverage Ratio, the Secured Leverage Ratio, the Interest Coverage Ratio and the amount of Consolidated Total Assets and Consolidated Adjusted EBITDA) contained in this Agreement that are calculated with respect to any Test Period during which any Subject Transaction occurs shall be calculated with respect to such Test Period and each such Subject Transaction on a Pro Forma Basis. Further, if since the beginning of any such Test Period and on or prior to the date of any required calculation of any financial ratio or test (i) any Subject Transaction has occurred or (ii) any Person that subsequently became a Restricted Subsidiary or was merged, amalgamated or consolidated with or into the Borrower or any of its Restricted Subsidiaries or any joint venture since the beginning of such Test Period has consummated any Subject Transaction, then, in each case, any applicable financial ratio or test shall be calculated on a Pro Forma Basis for such Test Period as if such Subject Transaction had occurred at the beginning of the applicable Test Period (it being understood, for the avoidance of doubt, that solely for purposes of (x) calculating compliance with Section 6.12(a) and (y) calculating the First Lien Leverage Ratio for purposes of the definitions of “Applicable Rate” and “Commitment Fee Rate”, in each case, no Subject Transaction occurring after the end of the relevant Test Period shall be taken into account). (b) For purposes of determining the permissibility of any action, change, transaction or event that requires a calculation of any financial ratio or test (including, without limitation, Section 6.12(a), any First Lien Leverage Ratio test, any Secured Leverage Ratio test, any Total Leverage Ratio test and/or any Interest Coverage Ratio test, the amount of Consolidated Adjusted EBITDA and/or Consolidated Total Assets), such financial ratio or test shall be calculated at the time such action is taken (subject to Section 1.11), such change is made, such transaction is consummated or such event occurs, as the case may be, and no Default or Event of Default shall be deemed to have occurred solely as a result of a change in such financial ratio or test occurring after the time such action is taken, such change is made, such transaction is consummated or such event occurs, as the case may be. (c) Notwithstanding anything to the contrary herein, with respect to any amounts incurred or transactions entered into (or consummated) in reliance on a provision of this Agreement (including any covenant or the definition of “Incremental Cap”) that does not require compliance with a financial ratio or test (including, without limitation, Section 6.12(a), any First Lien Leverage Ratio test, any Secured Leverage Ratio test, any Total Leverage Ratio test and/or any Interest Coverage Ratio test) (any such amounts, the “Fixed Amounts”) substantially concurrently with any amounts incurred or transactions entered into (or consummated) in reliance on a provision of this Agreement (including any covenant or the definition of “Incremental Cap”) that requires compliance with a financial ratio or test (including, without limitation, Section 6.12(a), any First Lien Leverage Ratio test, any Secured Leverage Ratio test, any Total Leverage Ratio test and/or any Interest Coverage Ratio test) (any such amounts, the “Incurrence-Based Amounts”), it is understood and agreed that the Fixed Amounts shall be disregarded in the calculation of the financial ratio or test applicable to the Incurrence-Based Amounts.

  • Non-Conforming Communications Agent and Lenders may rely upon any notices purportedly given by or on behalf of any Borrower even if such notices were not made in a manner specified herein, were incomplete or were not confirmed, or if the terms thereof, as understood by the recipient, varied from a later confirmation. Each Borrower shall indemnify and hold harmless each Indemnitee from any liabilities, losses, costs and expenses arising from any telephonic communication purportedly given by or on behalf of a Borrower.

  • Covenants, Conditions and Restrictions This Lease is subject to the effect of (i) any covenants, conditions, restrictions, easements, mortgages or deeds of trust, ground leases, rights of way of record and any other matters or documents of record; and (ii) any zoning laws of the city, county and state where the Building is situated (collectively referred to herein as "Restrictions") and Tenant will conform to and will not violate the terms of any such Restrictions.

  • General Conditions (i) Each party will make each payment or delivery specified in each Confirmation to be made by it, subject to the other provisions of this Agreement. (ii) Payments under this Agreement will be made on the due date for value on that date in the place of the account specified in the relevant Confirmation or otherwise pursuant to this Agreement, in freely transferable funds and in the manner customary for payments in the required currency. Where settlement is by delivery (that is, other than by payment), such delivery will be made for receipt on the due date in the manner customary for the relevant obligation unless otherwise specified in the relevant Confirmation or elsewhere in this Agreement. (iii) Each obligation of each party under Section 2(a)(i) is subject to (1) the condition precedent that no Event of Default or Potential Event of Default with respect to the other party has occurred and is continuing, (2) the condition precedent that no Early Termination Date in respect of the relevant Transaction has occurred or been effectively designated and (3) each other applicable condition precedent specified in this Agreement.

  • Offering Materials Furnished to Cowen The Company has delivered to Cowen one complete copy of the Registration Statement and a copy of each consent and certificate of experts filed as a part thereof, and conformed copies of the Registration Statement (without exhibits) and the Prospectus, as amended or supplemented, in such quantities and at such places as Cowen has reasonably requested.

  • Minimum Condition and Warranty Requirements for TIPS Sales All goods quoted or sold through a TIPS Sale shall be new unless clearly stated otherwise in writing. All new goods and services shall include the applicable manufacturers minimum standard warranty unless otherwise agreed to in the Supplemental Agreement.

  • Conditions Precedent/Effectiveness Conditions This Amendment shall be effective upon the date of satisfaction of all of the following conditions precedent (the “Effective Date”): (a) Agent shall have received this Amendment fully executed by the Borrowers; (b) Agent shall have received updated schedule to the Loan Agreement, if any; (c) Agent shall have received a Guaranty, fully executed by the New Guarantor; (d) Agent shall have received a Pledge Agreement, fully executed by the New Guarantor; (e) Agent shall have received a copy of the Asset Transfer Agreement; (f) Agent shall have received a copy of the resolutions in form and substance reasonably satisfactory to Agent, of the board of directors or managers of New Guarantor, authorizing the execution, delivery and performance of this Amendment, the Guaranty, and any related agreements, instruments, or documents to which New Guarantor is a party, certified by the Secretary or an Assistant Secretary of New Guarantor; (g) Agent shall have received a certificate of the Secretary or an Assistant Secretary of New Guarantor as to the incumbency and signature of the officers of New Guarantor executing this Amendment the Guaranty, and any related agreements, instruments, or documents to which New Guarantor is a party, together with evidence of the incumbency of such Secretary or Assistant Secretary; (h) Agent shall have received an incumbency certificate for each Borrower identifying all authorized officers with specimen signatures, certified by the Secretary of such Borrower; (i) Agent shall have received copies of the bylaws and memorandum of association of New Guarantor, together with a certificate of good standing or equivalent certification in the jurisdiction of formation of New Guarantor; (j) Agent shall have received the results of UCC, tax lien, and judgment searches against New Guarantor; (k) Agent shall have received an opinion of counsel of New Guarantor; (l) Agent shall have received updated certificates of insurance naming New Guarantor as an additional insured with respect to liability insurance and lender loss payee with respect to property insurance; (m) Agent shall have received reasonably satisfactory evidence that the Guarantor Restructuring shall be consummated; and (n) No Default or Event of Default shall have occurred and be continuing under the Loan Agreement.

  • Inspection and Rejection of Nonconforming Goods The Buyer has the right to inspect the Goods on or after the Delivery Date. Buyer, at its sole option, may inspect all or a sample of the Goods, and may reject all or any portion of the Goods if it determines the Goods are nonconforming or defective. If Buyer rejects any portion of the Goods, Buyer has the right, effective upon written notice to Seller, to: (a) rescind the Order in its entirety; (b) accept the Goods at a reasonably reduced price; or (c) reject the Goods and require replacement of the rejected Goods. If Buyer requires replacement of the Goods, Seller shall, at its expense, promptly replace the nonconforming Goods and pay for all related expenses, including, but not limited to, transportation charges for the return of the defective goods and the delivery of replacement Goods. If Seller fails to timely deliver replacement Goods, Buyer may replace them with goods from a third party and charge Seller the cost thereof and terminate this Order for cause pursuant to Section 19. Any inspection or other action by Buyer under this Section shall not reduce or otherwise affect Seller's obligations under the Order, and Buyer shall have the right to conduct further inspections after Seller has carried out its remedial actions.

  • Corrections to Factual Inaccuracies In the event that the LEA determines that the Provider is maintaining Student Data that contains a factual inaccuracy, and Provider cooperation is required in order to make a correction, the LEA shall notify the Provider of the factual inaccuracy and the correction to be made. No later than 90 calendar days after receiving the notice of the factual inaccuracy, the Provider shall correct the factual inaccuracy and shall provide written confirmation of the correction to the LEA.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!