CONTROL AND DELIVERY OF SUPPLIES AND CONSUMABLES Sample Clauses

CONTROL AND DELIVERY OF SUPPLIES AND CONSUMABLES. Supplies and consumables produced by the Subcontractor which are unique to the INS will be controlled immediately upon production. Such controls will provide for access by only those individuals who have met the INS' Office of Security employment suitability background requirements set forth in section H. Small inventories may be stored in a safe-type steel file container having a built-in, three position, dial-type changeable combination lock. Storage of larger inventories will be accomplished by the use of a vault or spaces where each door is equipped with a high security, long throw deadbolt lock. All windows in storage areas shall be secured with steel bars of other appropriate security devices. Overhead access to inventory storage areas shall be prevented by the installation of a 9-gauge wire mesh between the top of the walls and the true ceiling, or by the installation of infra-red or motion detection alarms. If 9- gauge wire mesh is installed, the mesh opening is not to be wider than 2 inches square and the top and bottom are to be secured to the ceiling above the wall below. All items will be kept under secure storage and will remain under such controls until the time of shipment. The Subcontractor shall comply with the requirements of the clause entitled Packaging. Marking and Shipment contained in Section D.
AutoNDA by SimpleDocs

Related to CONTROL AND DELIVERY OF SUPPLIES AND CONSUMABLES

  • Delivery of Equipment (a) We will try to deliver Equipment to you on the delivery date (Delivery Date) and at the address (Site) indicated on your Application during normal business hours in that area. (b) Variations at your request to Delivery Date or Site: (i) are at our discretion; and (ii) may be subject to conditions, including extra Charges.

  • Delivery of Products 4.1 The Supplier shall ensure that:‌ (a) Products are properly packed and secured in such manner as to enable them to reach their destination in good condition; (b) each delivery of Products is accompanied by a delivery note which shows the date of the Order, the Order number (if any), the type and quantity of Products (including the code number of the Products, where applicable), special storage instructions (if any) and, if the Products are being delivered in instalments, the outstanding balance of Products remaining to be delivered; and‌ (c) it states clearly on the delivery note any requirement for Ornua to return any packaging material for the Products to the Supplier. Any such packaging material shall only be returned to the Supplier at the cost of the Supplier. 4.2 The Supplier shall deliver the Products:‌ (a) to the location set out in the Order or such other location as the parties may agree which may include delivery to a carrier (Delivery Location); and (b) on the date specified in the Order or, if no such date is specified, on a date agreed with Ornua in advance (Delivery Date). Delivery shall be on a Business Day during normal business hours, unless agreed otherwise with Ornua or otherwise instructed by Ornua.‌ 4.3 Delivery of Products shall be completed when the Supplier unloads and stacks the Products at the Delivery Location, unless different delivery terms (or Incoterms®) are specified in the Order. 4.4 Ornua operates a “Just-in-Time” delivery system. Time shall be of the essence in relation to the Delivery Date and any agreed delivery time. If the Products are not delivered on time by the Supplier, clause 6.1 shall apply.‌ 4.5 If the Supplier delivers more that the quantity of Products ordered, Ornua shall not be bound to pay for the excess and any excess shall be and shall remain at the Supplier’s risk and shall be returnable at the Supplier’s expense. 4.6 The Supplier shall not deliver Products in instalments without Ornua's prior written consent. Where it is agreed that Products are to be delivered in instalments, they may be invoiced and paid for separately. Failure by the Supplier to deliver any one instalment on time or at all or any defect in an instalment shall entitle Ornua to the remedies set out in clause 6.1. 4.7 Title and risk in the Products shall pass to Ornua on completion of delivery.

  • Delivery of Software 1. SAP will deliver the Software as described in the Documentation and the Price List and will also provide the appropriate license key for the relevant End User. With regard to the features, quality and functionality of the Software the product description in the Documentation and the Price List is solely decisive. SAP does not own any additional features, quality or functionality. Distributor can, in particular, not assert any additional feature, quality or functionality from any public statements, publications or advertisements by SAP except to the extend SAP has expressly confirmed such additional feature, quality or functionality in writing. Any representation, warranty, undertaking or guarantee regarding additional features, quality or functionality is effective only if expressly confirmed by SAP’s management in writing. 2. After acceptance of an order, SAP will deliver to Distributor one copy of the relevant Software: a) on discs or other data media (“Physical Shipment”); or b) by making it available for downloading through the internet (usually on the SAP ServiceMarket Place (xxxx://xxxxxxx.xxx.xxx/swdc)) (“Electronic Delivery”). 3. The relevant Software and Documentation will be deemed delivered (including but not limited for the purpose of fixed delivery dates or timely delivery) and the risk passes to Distributor: a) in case of Physical Shipment, when the relevant disc or other data media thereof is handed over to the freight carrier (FCA - Free Carrier (named place of delivery), Incoterms 2010); or b) in case of Electronic Delivery, when SAP has made an electronic copy thereof available for downloading and has informed Distributor accordingly, (“Delivery”). 4. Upon Distributor’s request or if stipulate in the order, SAP may agree to provide Software and/or the appropriate license key directly to the relevant Open Ecosystem Partner instead (“Open Ecosystem Partner Delivery”). In case of Open Ecosystem Partner Delivery, the provisions set out in this Article 5 (Delivery of Software) will apply analogously; delivery to Distributor will be deemed to occur upon Delivery to the Open Ecosystem Partner. 5. Upon Distributor’s request or if stipulate in the order, SAP may agree to provide Software and/or the appropriate license key directly to the relevant End User instead (“End User Delivery”). In case of End User Delivery, the provisions set out in this Article 5 (Delivery of Software) will apply analogously; delivery to Distributor will be deemed to occur upon Delivery to the End User. 6. SAP might be entitled to suspend the delivery of the Software, Maintenance Services, applicable license key or both to Distributor, Open Ecosystem Partner or End User or both as further set out in this Sell On Premise Distribution Model as well as the Distribution GTCS. 7. If Distributor receives a new copy of the Software, Documentation and/or other SAP Materials that replaces previously provided Software, Documentation and/or other SAP Materials, Distributor must distribute that newest copy provided and either destroy or upon SAP’s request return previous copies. 8. Distributor must not make the Software, Documentation and/or other SAP Materials available to the Open Ecosystem Partner or End User by any means other than by delivering the Software, Documentation and/or other SAP Materials as originally provided by SAP. Distributor’s right to pass on the Software, Documentation and/or other SAP Materials is subject to the provisions of this Agreement.

  • Delivery of Services Axon personnel will work Monday through Friday, 8:30 a.m. to 5:30 p.m., except holidays. Axon will perform all on-site tasks over a consecutive timeframe. Axon will not charge Agency travel time by Axon personnel to Agency premises as work hours.

  • Delivery of Materials In the event of any expiration or termination of this Agreement, Contractor shall promptly provide the JBE with all originals and copies of the Deliverables, including any partially-completed Deliverables-related work product or materials, and any JBE-provided materials in its possession, custody, or control. In the event of any termination of this Agreement, the JBE shall not be liable to Contractor for compensation or damages incurred as a result of such termination; provided that if the JBE’s termination is not for cause, the JBE shall pay any fees due under this Agreement for Services performed or Deliverables completed and accepted as of the date of the JBE’s termination Notice.

  • All new supplies equipment and services shall include manufacturer's minimum standard warranty unless otherwise agreed to in writing. Vendor shall be legally permitted to sell all products offered for sale to TIPS Members. All goods proposed and sold shall be new unless clearly stated in writing. The Vendor shall provide timely and accurate customer support for orders to TIPS Members as agreed by the Parties. Vendors shall respond to such requests within a commercially reasonable time after receipt of the request. If support andƒor training is a line item sold or packaged with a sale, support shall be as agreed with the TIPS Member. Most TIPS Members are tax exempt and the related laws andƒor regulations of the controlling jurisdiction(s) of the TIPS Member shall apply. No assignment of Agreement may be made without the prior notification of TIPS. Written approval of TIPS shall not be unreasonably withheld. Payment for delivered goods and services can only be made to the awarded Vendor, Vendor designated reseller or vendor assigned company.

  • Delivery of Collateral (a) Upon the Bank’s written or oral request, or promptly, at any time that the Member becomes subject to any mandatory collateral delivery requirements that may be established in the Credit Policy, and until such time as may be agreed upon by the Bank in writing, the Member shall deliver to the Bank, or to a custodian designated by the Bank, such amount of Qualifying Collateral as may be necessary so that the Lendable Collateral Value of such Qualifying Collateral held by the Bank, or such custodian, meets or exceeds the Collateral Maintenance Level at all times. Collateral delivered to the Bank shall be endorsed or assigned, as appropriate, in recordable form by the Member to the Bank, as specified by the Bank. When requested by the Bank, such endorsements or assignments shall be in blanket form except that, in the case of First Mortgage Documents and Other Mortgage Documents, there shall be separate endorsements and assignments for each county or recording district in which the real property covered by an item of First Mortgage Collateral or Other Eligible Collateral is located. With respect to First Mortgage Collateral and mortgage loans which are Other Eligible Collateral that are delivered hereunder, the Member need only deliver the First Mortgage Documents and Other Mortgage Documents, unless otherwise directed by the Bank. Concurrently with the initial delivery of Collateral, the Member shall deliver to the Bank a status report and accompanying schedules, all in the form(s) prescribed by the Bank, specifying and describing the Collateral held by the Bank or its custodian and certifying that such Collateral is Qualifying Collateral. (b) With respect to uncertificated securities pledged to the Bank as Government and Agency Securities Collateral, Other Securities Collateral, or Additional Collateral hereunder, the delivery requirements contained in this Agreement shall be satisfied by the transfer of a security interest in such securities to the Bank, such transfer to be effected in such manner and to be evidenced by such documents as shall be specified by the Bank. (c) The Member agrees to pay to the Bank such reasonable fees and charges as may be assessed by the Bank to cover the Bank’s overhead and other costs relating to the receipt, holding, redelivery, and reassignment of Collateral and to reimburse the Bank upon request for all recording fees and other reasonable expenses, disbursements, and advances incurred or made by the Bank in connection therewith (including the reasonable compensation and the expenses and disbursements of any custodian, consultant, or appraiser that may be appointed by the Bank hereunder, and the agents and legal counsel of the Bank and of such custodian). Any sums owed to the Bank under this Section 3.04(c) may be collected by the Bank, at its option, by debiting the Member’s DID account with the Bank. (d) The Member shall, upon request of the Bank, immediately take such other actions as the Bank shall deem necessary or appropriate to perfect the Bank’s security interest in the Collateral or otherwise to obtain, preserve, protect, enforce, or collect the Collateral or the proceeds thereof.

  • Tasks and Deliverables A description of and the schedule for each task and deliverable, illustrated by a Xxxxx chart. Start and completion dates for each task, milestone, and deliverable shall be indicated. Must include deliverables specified in SOW-RFP as well as other deliverables that may be proposed by Contractor.

  • Delivery of the Collateral (a) Each Pledgor agrees promptly to deliver or cause to be delivered to the Collateral Agent any and all Pledged Securities, and any and all certificates or other instruments or documents representing the Collateral. (b) Each Pledgor will cause any Indebtedness for borrowed money owed to the Pledgor by any person to be evidenced by a duly executed promissory note that is pledged and delivered to the Collateral Agent pursuant to the terms thereof.

  • Services and Deliverables The Services and the required Deliverables for the Services are specified below. Service Type Output Measure Quantity per annum Number of Service Users Funding amount per annum (excl. GST) $ $ $ Description of Services Funding amount one-off (excl. GST) $ Service Type Output Measure Quantity per annum Number of Service Users Funding amount (excl. GST) $ $ $ Description of Services Funding amount one-off (excl. GST) $ *Note: Refer to clause 4.8 in the Funding and Service Details about permitted variations in output quantities.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!