Cost Reduction and Productivity Sharing Sample Clauses

Cost Reduction and Productivity Sharing. Supplier will work diligently with YETI in an effort to reduce waste, enhance productivity, and decrease Product Purchase Prices through reductions in the cost of producing Products, all without adversely impacting quality or delivery times. Throughout the Term, Supplier will take advantage of cost saving technologies and other cost reduction opportunities to assist YETI in maintaining a competitive cost position. Supplier will provide YETI with supporting cost information (in the format and with the level of detail requested by YETI) to support initial pricing of new Products, and price changes for modified Products. Upon YETI’s request from time to time, Supplier will provide YETI with a pricing breakdown by Product component. Without limiting the foregoing, throughout the Term Supplier will identify specific cost reduction and productivity enhancement activities (collectively, the “Activities”) that it can engage in to reduce Product Purchase Prices without having an adverse effect on quality or delivery times (it being understood that some Activities may be proposed by YETI to Supplier). Supplier will document for YETI the net cost reduction that each such Activity would have on a per-Product basis, and the Parties shall discuss each such Activity. If YETI agrees to an Activity (such agreement not to be unreasonably withheld or delayed) and modifies the relevant Product Specifications if necessary to accommodate the Activity, Supplier shall engage in that Activity, at Supplier’s cost unless otherwise mutually agreed by the Parties. The Parties agree that of any cost savings achieved through any such Activity, percent ( %) of those savings shall be applied to reduce the Product Purchase Price of the relevant Product, while the remaining percent ( %) shall be retained by Supplier as productivity sharing. Supplier shall provide YETI with adequate substantiation of the cost savings achieved through each Activity. The Parties shall meet on a quarterly basis to discuss ongoing Activities and the results of those Activities, any adjustments that should be made with respect to ongoing Activities, and new potential Activities that Supplier could, upon mutual agreement of the Parties, engage in to reduce costs and increase productivity. Supplier shall maintain a consistent flow of proposed Activities to YETI, and shall diligently implement mutually-approved Activities, so that the Product Purchase Price for each Product is reduced by at least percent ( %) year-o...
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Cost Reduction and Productivity Sharing

  • PRODUCTIVITY The Union shall place no limitations upon the amount of work which an Employee shall perform during the working day and there shall be no restrictions imposed against the use of any type of machinery, tools or labour saving devices.

  • Productivity Allowance A productivity allowance per hour worked will be paid to employees engaged upon construction work from the date of agreement. This allowance will not be subject to penalty addition and shall be in lieu of all or any Parent Award disability allowances, with the exception of the multi-storey allowance. Site/Project Allowances will be paid in addition to the productivity allowance where such an addition is either: (i) Where such an allowances is awarded by the Industrial Relations Commission; or (ii) Where such an allowance is required by a site condition specified at the time of tender. It is incumbent upon the company to enquire of the Head Contractor/Client at the time of tender whether a site/project allowance is required to be paid and in particular whether it is required to be paid in accordance with the Construction Industry Site Allowance Matrix: or (iii) If the Contract between the Employer and the Head Contractor/Client does not contain provision for a site allowance, and after the contract is made the head contractor makes an agreement under which a site allowance is payable, then the head contractor should then agree in writing to reimburse the employer the full cost of the said allowance.

  • Product Development (a) Supplier may develop enhancements it intends to incorporate into the BioGlue Surgical Adhesive during the term of this Agreement that have potential application to the Company Product (“Enhancements”). Unless otherwise agreed by the parties, at least once every six months during the Term, representatives of each of BioForm and Supplier shall hold a meeting in accordance with Sections 4.4 and 8.4 (the “Product Development Meeting”) at which Supplier will present Enhancements for BioForm to consider for application to the Company Product. At such Product Development Meeting, BioForm will also present its marketing plans (pursuant to Section 4.4) for the period and any information or feedback that BioForm reasonably believes may lead to Improvements. Within 30 calendar days following each Product Development Meeting, Supplier shall deliver a notice to BioForm (the “Enhancements Notice”) that shall describe the Enhancements that were presented by Supplier at such Product Development Meeting. Within 30 calendar days following receipt of the Enhancements Notice, BioForm may notify Supplier in writing if BioForm elects that any Enhancement described in the Enhancements Notice shall become an Improvement. If BioForm does provide such notice to Supplier during such 30-calendar day period, then BioForm and Supplier shall agree on a timeline for implementation of the Improvement in new Product Specifications for Company Product. If BioForm does not provide such a notice, said Enhancement shall not be implemented into the Company Product. The Enhancements Notice may also describe any potential Enhancements presented by Supplier at the Product Development Meeting, but BioForm shall not be required to take any action under this Section 8.4 with respect to such potential Enhancements until such time as they are presented by Supplier as Enhancements at a future Product Development Meeting. All Enhancements and potential Enhancement information provided by Supplier shall be considered Supplier Confidential Information. (b) From time to time, each party may request the other party to participate in joint projects to develop Improvements. Neither party is obligated to participate in such projects, and in each **** Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. instance, each party’s decision whether to participate will be made in such party’s sole discretion. If both parties mutually agree to participate in such a project (a “Program”), the parties will promptly prepare a mutually agreeable written development agreement specifying the development activities to be performed by and the research and development tasks assigned to each party (the “Development Agreement”). All allocation of Intellectual Property rights with respect to any Program will be set forth in writing in the Development Agreement. (c) In the absence of a Development Agreement, (i) BioForm and Supplier shall retain joint ownership of Intellectual Property rights in which there is joint inventorship by BioForm (or its Affiliates) and Supplier, as determined in accordance with United States patent law, with Supplier’s rights in such joint ownership being subject to the license rights of BioForm under this Agreement, (ii) any Intellectual Property rights related to the Company Products, Enhancements, and Improvements that are created solely by employees or consultants of Supplier during the Term shall be considered to be Intellectual Property rights of Supplier, subject to the license rights of BioForm under this Agreement, and (iii) any Intellectual Property rights related to the Company Products and Improvements that are created solely by employees or consultants of BioForm or any of its Affiliates during the Term shall be considered to be Intellectual Property rights of BioForm. BioForm hereby grants to Supplier a perpetual, royalty free, world-wide, nonexclusive license to Supplier under such Blocking Intellectual Property to make, use, and sell such Intellectual Property outside the Field. “Blocking Intellectual Property” for the purposes of Section 8.4(c)(iii) shall mean Intellectual Property necessary for Supplier to make, use, or sell SA Product.

  • Long Term Cost Evaluation Criterion # 4. READ CAREFULLY and see in the RFP document under "Proposal Scoring and Evaluation". Points will be assigned to this criterion based on your answer to this Attribute. Points are awarded if you agree not i ncrease your catalog prices (as defined herein) more than X% annually over the previous year for years two and thr ee and potentially year four, unless an exigent circumstance exists in the marketplace and the excess price increase which exceeds X% annually is supported by documentation provided by you and your suppliers and shared with TIP S, if requested. If you agree NOT to increase prices more than 5%, except when justified by supporting documentati on, you are awarded 10 points; if 6% to 14%, except when justified by supporting documentation, you receive 1 to 9 points incrementally. Price increases 14% or greater, except when justified by supporting documentation, receive 0 points. increases will be 5% or less annually per question Required Confidentiality Claim Form This completed form is required by TIPS. By submitting a response to this solicitation you agree to download from th e “Attachments” section, complete according to the instructions on the form, then uploading the completed form, wit h any confidential attachments, if applicable, to the “Response Attachments” section titled “Confidentiality Form” in order to provide to TIPS the completed form titled, “CONFIDENTIALITY CLAIM FORM”. By completing this process, you provide us with the information we require to comply with the open record laws of the State of Texas as they ma y apply to your proposal submission. If you do not provide the form with your proposal, an award will not be made if your proposal is qualified for an award, until TIPS has an accurate, completed form from you. Read the form carefully before completing and if you have any questions, email Xxxx Xxxxxx at TIPS at xxxx.xxxxxx@t xxx-xxx.xxx If the vendor is awarded a contract with TIPS under this solicitation, the vendor agrees to make any Choice of Law c lauses in any contract or agreement entered into between the awarded vendor and with a TIPS member entity to re ad as follows: "Choice of law shall be the laws of the state where the customer resides" or words to that effect. Agreed In the event of litigation or use of any dispute resolution model when resolving disputes with a TIPS member entity a s a result of a transaction between the vendor and TIPS or the TIPS member entity, the Venue for any litigation or ot her agreed upon model shall be in the state and county where the customer resides unless otherwise agreed by the parties at the time the dispute resolution model is decided by the parties. Agreed

  • Cost Allocation Cost allocation of Generator Interconnection Related Upgrades shall be in accordance with Schedule 11 of Section II of the Tariff.

  • Staffing There shall be a clinician employed by the outside contractor for EAP Services who will be on-site a minimum of 20 hours a week. The clinician shall report directly to the outside contractor, Peer Assistance Oversight Committee and the MIF liaison. There shall be three full-time Peer Assistants reporting to the outside contractor.

  • Commercial Price List Reductions Where NYS Net Prices are based on a discount from Contractor’s list prices, price decreases shall take effect automatically during the Contract term and apply to Purchase Orders submitted on or after the date Contractor lowers its pricing to its customers generally or to similarly situated government customers during the Contract term; or

  • Cost Sharing a) With respect to the funding in C6.1a), should there be an amount of employee co-pay, the Trust shall advise boards what that amount shall be. Unless advised otherwise, there will be no deductions upon the Participation Date. b) Any further cost sharing or funding arrangements as per previous local collective agreements in effect as of August 31, 2014 remain status quo.

  • Budgeting The budget set out in the Consortium Plan shall be valued in accordance with the usual accounting and management principles and practices of the respective Parties.

  • Cost Estimates If this Agreement pertains to the design of a public works project, CONSULTANT shall submit estimates of probable construction costs at each phase of design submittal. If the total estimated construction cost at any submittal exceeds ten percent (10%) of CITY’s stated construction budget, CONSULTANT shall make recommendations to CITY for aligning the PROJECT design with the budget, incorporate CITY approved recommendations, and revise the design to meet the Project budget, at no additional cost to CITY.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!