Delivery Conditions; Equipment; Status Sample Clauses

Delivery Conditions; Equipment; Status. 2.1. At Delivery, the Aircraft shall be serviceable, certified for international cargo operations, with all systems functioning, and clean in accordance with international airline standards.
Sample 1Sample 2
AutoNDA by SimpleDocs
Delivery Conditions; Equipment; Status. 2.1. At Delivery, the Aircraft shall be serviceable, certified for international cargo operations, with all systems functioning, and clean in accordance with international airline standards. 2.2. The Aircraft shall have been converted to a cargo configuration by IAI in accordance with the IAI FAA Approved Supplementary Type Certificate – 767-200 Passenger to Special Freighter Conversion Specification, with all related systems and components functioning. All maintenance requirements resulting from such conversion shall have been accomplished. 2.3. The Aircraft shall be delivered with a current FAA Certificate of Airworthiness. 2.4. The Aircraft shall have had all scheduled structural inspections completed and all Deferred Maintenance Items corrected prior to Delivery. 2.5. Lessor shall have complied with all ADs (and all service bulletins requiring compliance under the ABX Maintenance Program) issued prior to Delivery affecting the Aircraft and requiring terminating action prior to Delivery or within one year after Delivery (without regard to any deferrals which are or might be granted). 2.6. Between execution of the foregoing Aircraft Lease Agreement and Delivery, Lessor shall not have removed any of the Engines or modules from the Aircraft except due to operational necessity or as a result of a scheduled shop visit, and Lessor shall not discriminate against the Aircraft as compared to other comparable aircraft owned or operated by Lessor. 2.7. The Aircraft, at Lessee’s cost, shall be painted in the Lessee’s livery (or as otherwise directed by Lessee).
Sample 1
Delivery Conditions; Equipment; Status. 2.1. At Delivery, the Aircraft shall be serviceable, certified for international cargo operations, with all systems functioning, and clean in accordance with international airline standards. 2.2. The Aircraft (which was previously modified from a passenger configuration to a Boeing 767-200PC (Package Carrier) configuration per ABX Air XXX XX000000XX-X, XX00000XX-X and ST01671AT-D) shall have been converted by IAI to a Boeing 767-200SF (Special Freighter) configuration in accordance with the following, with all related systems and components functioning, and shall be ready for revenue service: (a) FAA XXX XX00000XX and per CAAI XXX XX000 in accordance with MDL 368-00-00-94100 Issue “BU”; (b) “C.L.S.” installation in the main deck as per AAR STC ST01998CH; and (c) Window plugs installation per XXX Xxxxxxx XX00000XX. 2.3. The Aircraft shall be delivered with a current FAA Certificate of Airworthiness. 2.4. The Aircraft shall have had all scheduled structural inspections completed and all Deferred Maintenance Items corrected prior to Delivery. 2.5. Lessor shall have complied with all ADs (and all service bulletins requiring compliance under the ABX Maintenance Program) issued prior to Delivery affecting the Aircraft and requiring terminating action prior to Delivery or within one year after Delivery (without regard to any deferrals which are or might be granted). 2.6. Between execution of the foregoing Aircraft Lease Agreement and Delivery, Lessor shall not have removed any of the Engines or modules from the Aircraft except due to operational necessity or as a result of a scheduled shop visit, and Lessor shall not discriminate against the Aircraft as compared to other comparable aircraft owned or operated by Lessor. 2.7. The Aircraft, at Lessee’s cost, shall be painted in the Lessee’s livery (or as otherwise directed by Lessee). MSN Initials: ABX: DHL:
Sample 1

Related to Delivery Conditions; Equipment; Status

  • Delivery Condition Subtenant acknowledges that it takes possession of the Subleased Premises in its “as is” condition, and further acknowledges that Sublandlord has made no representations or warranties of any kind or nature, whether express or implied, with respect to the Subleased Premises, the remainder of the Premises, the common areas, or the Building, nor has Sublandlord agreed to undertake or perform any modifications, alterations, or improvements to the Subleased Premises, the remainder of the Premises, the common areas or the Building which would inure to Subtenant’s benefit.

  • Delivery Conditions (a) The Delivery Conditions are as follows: (i) At Seller’s expense, Seller shall have secured all Governmental and grid operations approvals as are necessary for the safe and lawful operation and maintenance of the Project and to enable Seller to deliver Distribution Services at the Initial Contract Capacity to Buyer. (ii) Seller shall have posted collateral as required by Section 10.4(a)(ii). (iii) Seller shall have submitted for Buyer’s review a Project Safety Plan incorporating the elements described in Appendix XII, which must demonstrate Seller’s ability to comply with the Safety Requirements on the IDD and for the Delivery Term. (iv) Seller shall have delivered to Buyer the Safety Attestation in accordance with Section 2(a) of Appendix XIV. (v) As of the IDD, no Seller’s Event of Default shall have occurred and remain uncured. (vi) At Seller’s expense, Seller or Contractor shall have constructed or caused to be constructed the Project as of the IDD and submitted the Certification for Commercial Operation in Appendix VII-A to enable (A) Seller to satisfy the obligations of the Seller herein and (B) the Project to deliver Distribution Services at the Contract Capacity to Buyer. (vii) At Seller’s expense, Seller shall have installed any necessary metering to deliver the applicable Distribution Services in accordance with Section 4.1 and any applicable tariffs of the Utility Distribution Company. (viii) Seller shall have met each Critical Milestone set forth in Appendix VI pursuant to Section 2.3.

  • Final Completion Date Final Completion for the Work as defined in Article 6.1.3 of the General Conditions to the Continuing Contract for Construction Management shall be achieved by October 31, 2024.

  • Substantial Completion Date Substantial Completion of the Work as defined in Article 6.1.2 of the General Conditions to the Continuing Contract for Construction Management shall be achieved by July 31, 2022.

  • Completion of Repairs Borrower will commence any Repairs as soon as practicable after the date of this Loan Agreement and will diligently proceed with and complete such Repairs on or before the Completion Date. All Repairs and Capital Replacements will be completed in a good and workmanlike manner, with suitable materials, and in accordance with good building practices and all applicable laws, ordinances, rules, regulations, building setback lines and restrictions applicable to the Mortgaged Property. Borrower agrees to cause the replacement of any material or work that is defective, unworkmanlike or that does not comply with the requirements of this Loan Agreement, as determined by Lender.

  • ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:

  • Project Completion Date It is agreed between the Parties that the Project Completion Date is <END DATE, YEAR>. If the Project is not completed by such date then, subject to an amendment agreed to between the Parties, Alberta Innovates may elect to terminate this Investment Agreement. In such event, Alberta Innovates will notify the Applicant of its decision to terminate as soon as reasonably practical and shall advise the Applicant of the effective date of termination. Alberta Innovates will have no liability or obligation to reimburse the Applicant for any Project Costs incurred after the effective date of termination and may require the Applicant to return any portions of the Investment which were spent on Ineligible Expenses. Additionally, any portion of the Investment not used and accounted for in accordance with this Agreement as of the Project Completion Date or earlier termination is repayable by the Applicant to AI at AI’s request.

  • Final Completion The full and final completion of all Work in accordance with the Contract Documents.

  • Completion Date The Work under this Contract shall be completed by midnight of the date required in the Contract as the Material Completion and Occupancy Date unless extended by approved requests for extension of time.

  • Substantial Completion 9.8.1 When the Contractor considers that the Work, or a designated portion thereof which has been accepted in writing to by the State, is substantially complete as defined in Subparagraph

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!