Delivery of Products 4.1 The Supplier shall ensure that: (a) Products are properly packed and secured in such manner as to enable them to reach their destination in good condition; (b) each delivery of Products is accompanied by a delivery note which shows the date of the Order, the Order number (if any), the type and quantity of Products (including the code number of the Products, where applicable), special storage instructions (if any) and, if the Products are being delivered in instalments, the outstanding balance of Products remaining to be delivered; and (c) it states clearly on the delivery note any requirement for Ornua to return any packaging material for the Products to the Supplier. Any such packaging material shall only be returned to the Supplier at the cost of the Supplier. 4.2 The Supplier shall deliver the Products: (a) to the location set out in the Order or such other location as the parties may agree which may include delivery to a carrier (Delivery Location); and (b) on the date specified in the Order or, if no such date is specified, on a date agreed with Ornua in advance (Delivery Date). Delivery shall be on a Business Day during normal business hours, unless agreed otherwise with Ornua or otherwise instructed by Ornua. 4.3 Delivery of Products shall be completed when the Supplier unloads and stacks the Products at the Delivery Location, unless different delivery terms (or Incoterms®) are specified in the Order. 4.4 Ornua operates a “Just-in-Time” delivery system. Time shall be of the essence in relation to the Delivery Date and any agreed delivery time. If the Products are not delivered on time by the Supplier, clause 6.1 shall apply. 4.5 If the Supplier delivers more that the quantity of Products ordered, Ornua shall not be bound to pay for the excess and any excess shall be and shall remain at the Supplier’s risk and shall be returnable at the Supplier’s expense. 4.6 The Supplier shall not deliver Products in instalments without Ornua's prior written consent. Where it is agreed that Products are to be delivered in instalments, they may be invoiced and paid for separately. Failure by the Supplier to deliver any one instalment on time or at all or any defect in an instalment shall entitle Ornua to the remedies set out in clause 6.1. 4.7 Title and risk in the Products shall pass to Ornua on completion of delivery.
Delivery of Product 11.1 Subject to Clause 25 (Capacity Constraints), GSK (or the Nominated Supplier) shall Deliver the Products on the date specified in the relevant Firm Order, provided that: (A) the quantity of Product Delivered by GSK may vary by [***] from the quantity specified in the relevant Firm Order; and (B) the date of Delivery may vary by [***] from the date specified in the relevant Firm Order, and such variance shall not constitute a breach of this Agreement by GSK or entitle the Purchaser to reject such Delivery. Delivery of Commercial API and Commercial Products shall take place following release by GSK of such Products in accordance with (and the extent required by) the Quality Agreement, provided that, for clarity, the Purchaser shall only be required to pay for the quantity of Product that is actually Delivered. 11.2 In respect of Commercial API, the Parties may agree that some or all of the quantities of such Commercial API Delivered pursuant to Clause 11.1 shall remain in the possession of GSK or its Affiliate on [***]. The Purchaser shall pay GSK a storage fee to cover any GSK costs and expenses incurred in connection with holding and storing such [***] stock (“Storage Fee”). The Storage Fee is set forth in Schedule 4 (Fees). For the avoidance of doubt, no Storage Fee is payable in respect of quantities of Commercial API required for the Manufacture of the Commercial Product shown in the Firm Zone and that are held by GSK at designated Manufacturing Site in respect of Commercial Product for the purposes of such Manufacture. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE DERMAVANT SCIENCES LTD. HAS DETERMINED THE INFORMATION (I) IS NOT MATERIAL AND (II) WOULD LIKELY CAUSE COMPETITIVE HARM TO DERMAVANT SCIENCES LTD. IF PUBLICLY DISCLOSED. 11.3 Subject to paragraph 2 of Schedule 3 (Toll Manufacturing Provisions), the risk in and title to the Commercial Products shall remain with GSK (or its Affiliate) until Delivered, at which point it shall pass to the Purchaser. Title to Commercial API shall pass to the Purchaser when such Commercial API is purchased by Purchaser, but risk in such Commercial API shall remain with GSK in accordance with Clause 8.5 for so long as such Commercial API is in GSK’s possession as Purchaser Materials. 11.4 Other than in respect of Commercial API that the Parties agree shall be retained by GSK on Consignment, the Purchaser shall collect the Products Delivered from the Manufacturing Site on the date of Delivery, or such date as GSK, the Nominated Supplier or the Nominated Manufacturer may notify to the Purchaser (provided that, and if the Delivery date notified to the Purchaser is earlier or later than the Delivery window contemplated by Clause 11.1, the Delivery date must be agreed with the Purchaser). Notwithstanding the foregoing, and without limiting Clause 20.2, Purchaser may, [***], elect to obtain Delivery at any point within [***] of the notified date of Delivery by providing notice to GSK of such revised Delivery date. 11.5 Commercial API that the Parties agree shall be retained by GSK [***] at the Manufacturing Site in respect of Commercial API shall be collected by the Purchaser from such Manufacturing Site on such date as may be agreed between the Parties. 11.6 For the avoidance of doubt, irrespective of whether or not any quantity of Commercial API is retained by GSK [***] for a period of time after Delivery, the Purchaser shall be responsible for the delivery of Toll Materials to the designated Manufacturing Site in respect of Commercial Product.
DELIVERY OF CALCULATIONS On or before November 1 of each year for which this Agreement is effective, the Third Party appointed pursuant to Section 4.3 of this Agreement shall forward to the Parties a certification containing the calculations required under this Article IV, Article V, Article VI, of this Agreement in sufficient detail to allow the Parties to understand the manner in which the calculations were made. The Third Party shall simultaneously submit his, her, or its invoice for fees for services rendered to the Parties, if any fees are being claimed, which fee shall be the sole responsibility of the District, but subject to the provisions of Section 4.8, below. Upon reasonable prior notice, the employees and agents of the Applicant shall have access, at all reasonable times, to the Third Party’s calculations, records, and correspondence pertaining to the calculation and fee for the purpose of verification. The Third Party shall maintain supporting data consistent with generally accepted accounting practices, and the employees and agents of the Applicant shall have the right to reproduce and retain for purpose of audit, any of these documents. The Third Party shall preserve all documents pertaining to the calculation until four (4) years after the Final Termination Date of this Agreement. The Applicant shall not be liable for any of the Third Party’s costs resulting from an audit of the Third Party’s books, records, correspondence, or work papers pertaining to the calculations contemplated by this Agreement.
Delivery of Cash For the avoidance of doubt, nothing in this Confirmation shall be interpreted as requiring Counterparty to deliver cash in respect of the settlement of this Transaction, except in circumstances where the required cash settlement thereof is permitted for classification of the contract as equity by ASC 815-40 (formerly EITF 00-19) as in effect on the Trade Date (including, without limitation, where Counterparty so elects to deliver cash or fails timely to elect to deliver Shares in respect of such settlement). For the avoidance of doubt, the preceding sentence shall not be construed as limiting (i) Paragraph 7(i) hereunder or (ii) any damages that may be payable by Counterparty as a result of breach of this Confirmation.
Delivery of Software 1. SAP will deliver the Software as described in the Documentation and the Price List and will also provide the appropriate license key for the relevant End User. With regard to the features, quality and functionality of the Software the product description in the Documentation and the Price List is solely decisive. SAP does not own any additional features, quality or functionality. Distributor can, in particular, not assert any additional feature, quality or functionality from any public statements, publications or advertisements by SAP except to the extend SAP has expressly confirmed such additional feature, quality or functionality in writing. Any representation, warranty, undertaking or guarantee regarding additional features, quality or functionality is effective only if expressly confirmed by SAP’s management in writing. 2. After acceptance of an order, SAP will deliver to Distributor one copy of the relevant Software: a) on discs or other data media (“Physical Shipment”); or b) by making it available for downloading through the internet (usually on the SAP ServiceMarket Place (xxxx://xxxxxxx.xxx.xxx/swdc)) (“Electronic Delivery”). 3. The relevant Software and Documentation will be deemed delivered (including but not limited for the purpose of fixed delivery dates or timely delivery) and the risk passes to Distributor: a) in case of Physical Shipment, when the relevant disc or other data media thereof is handed over to the freight carrier (FCA - Free Carrier (named place of delivery), Incoterms 2010); or b) in case of Electronic Delivery, when SAP has made an electronic copy thereof available for downloading and has informed Distributor accordingly, (“Delivery”). 4. Upon Distributor’s request or if stipulate in the order, SAP may agree to provide Software and/or the appropriate license key directly to the relevant Open Ecosystem Partner instead (“Open Ecosystem Partner Delivery”). In case of Open Ecosystem Partner Delivery, the provisions set out in this Article 5 (Delivery of Software) will apply analogously; delivery to Distributor will be deemed to occur upon Delivery to the Open Ecosystem Partner. 5. Upon Distributor’s request or if stipulate in the order, SAP may agree to provide Software and/or the appropriate license key directly to the relevant End User instead (“End User Delivery”). In case of End User Delivery, the provisions set out in this Article 5 (Delivery of Software) will apply analogously; delivery to Distributor will be deemed to occur upon Delivery to the End User. 6. SAP might be entitled to suspend the delivery of the Software, Maintenance Services, applicable license key or both to Distributor, Open Ecosystem Partner or End User or both as further set out in this Sell On Premise Distribution Model as well as the Distribution GTCS. 7. If Distributor receives a new copy of the Software, Documentation and/or other SAP Materials that replaces previously provided Software, Documentation and/or other SAP Materials, Distributor must distribute that newest copy provided and either destroy or upon SAP’s request return previous copies. 8. Distributor must not make the Software, Documentation and/or other SAP Materials available to the Open Ecosystem Partner or End User by any means other than by delivering the Software, Documentation and/or other SAP Materials as originally provided by SAP. Distributor’s right to pass on the Software, Documentation and/or other SAP Materials is subject to the provisions of this Agreement.
Delivery of Funds No later than one (1) business day after the execution of this Agreement by the Investor and the Company, the Investor shall remit by wire transfer the amount of funds equal to the aggregate purchase price for the Units being purchased by the Investor to the following account designated by the Company and the Placement Agent pursuant to the terms of that certain Escrow Agreement (the “Escrow Agreement”) dated as of the date hereof, by and among the Company, the Placement Agent and JPMorgan Chase Bank, N.A. (the “Escrow Agent”): JPMorgan Chase Bank, N.A. ABA # 000000000 Account Name: QuickLogic Corporation Account Number: 806033411, Quick Logic Escrow Account Attention: Xxxxxx Xxxxx Tel: (000) 000-0000 Such funds shall be held in escrow until the Closing and delivered by the Escrow Agent on behalf of the Investors to the Company upon the satisfaction, in the sole judgment of the Placement Agent, of the conditions set forth in Section 3.2(b) hereof. The Placement Agent shall have no rights in or to any of the escrowed funds, unless the Placement Agent and the Escrow Agent are notified in writing by the Company in connection with the Closing that a portion of the escrowed funds shall be applied to the Placement Fee. The Company agrees to indemnify and hold the Escrow Agent harmless from and against any and all losses, costs, damages, expenses and claims (including, without limitation, court costs and reasonable attorneys fees) (“Losses”) arising under this Section 3.3 or otherwise with respect to the funds held in escrow pursuant hereto or arising under the Escrow Agreement, unless it is finally, judicially determined that such Losses resulted directly from the willful misconduct or gross negligence of the Escrow Agent. Anything in this Agreement to the contrary notwithstanding, in no event shall the Escrow Agent be liable for any special, indirect or consequential loss or damage of any kind whatsoever (including but not limited to lost profits), even if the Escrow Agent has been advised of the likelihood of such loss or damage and regardless of the form of action.
Delivery of Materials In the event of any expiration or termination of this Agreement, Contractor shall promptly provide the JBE with all originals and copies of the Deliverables, including any partially-completed Deliverables-related work product or materials, and any JBE-provided materials in its possession, custody, or control. In the event of any termination of this Agreement, the JBE shall not be liable to Contractor for compensation or damages incurred as a result of such termination; provided that if the JBE’s termination is not for cause, the JBE shall pay any fees due under this Agreement for Services performed or Deliverables completed and accepted as of the date of the JBE’s termination Notice.
Delivery of Work If the Director terminates the Master Agreement and/or any Approved Service Order(s) – whether for convenience or for cause – the Director has the option of requiring the Consultant to provide to the City any finished or unfinished Work Product prepared by the Consultant up to the date of Consultant’s receipt of the written notice of termination.
Delivery of Copies The Company will deliver, without charge, (i) to the Representatives, two signed copies of the Registration Statement as originally filed and each amendment thereto, in each case including all exhibits and consents filed therewith and documents incorporated by reference therein; and (ii) to each Underwriter (A) a conformed copy of the Registration Statement as originally filed and each amendment thereto (without exhibits) and (B) during the Prospectus Delivery Period (as defined below), as many copies of the Prospectus (including all amendments and supplements thereto and documents incorporated by reference therein and each Issuer Free Writing Prospectus) as the Representatives may reasonably request. As used herein, the term “Prospectus Delivery Period” means such period of time after the first date of the public offering of the Shares as in the opinion of counsel for the Underwriters a prospectus relating to the Shares is required by law to be delivered (or required to be delivered but for Rule 172 under the Securities Act) in connection with sales of the Shares by any Underwriter or dealer.
Delivery of Goods 2.1 All Goods are supplied Ex Works (Incoterms 2020) Supplier’s premises unless specifically agreed to the contrary in any Order. Any dates quoted for delivery are approximate only and the time of delivery is not of the essence. 2.2 If Goods are ready for delivery and Purchaser fails to take delivery on the date required by the Contract, or after seven (7) days’ written notice from Supplier where no such date is specified, Supplier shall be entitled to: (a) issue an invoice for such Goods; and (b) charge Purchaser for all additional costs and expenses (including, without limitation, warehousing and insurance) until delivery takes place. 2.3 If Purchaser fails to take delivery within thirty (30) days of the date of invoice it shall be deemed to have waived its rights under the Contract, and without prejudice to any other right that Supplier may have against Purchaser, including the right to recover the purchase price in full, Supplier shall be entitled to resell the Goods. 2.4 Any right of Purchaser to reject the Goods and/or terminate the Contract for late delivery of the Goods shall not be exercisable unless Purchaser has first served written notice on Supplier requiring Supplier to complete delivery of the Goods within not less than thirty (30) days of service of that notice on Supplier in accordance with Section 14. Supplier shall not be liable for any delay in delivery of the Goods caused by Purchaser's action or inaction including, without limitation, failure to provide Supplier with adequate delivery instructions or any other information, applicable to the supply of the Goods. If Supplier fails to deliver, or is late in delivering the Goods, Supplier’s liability shall be limited to the price of the Goods. 2.5 Purchaser shall promptly inspect all delivered Goods and shall notify Supplier in writing of any issues regarding the Goods delivered, including, without limitation, as to quantity, type and quality, within ten
