Common use of Demarcation Point Clause in Contracts

Demarcation Point. BellSouth will designate the point(s) of demarcation between DSLi’s equipment and/or network and BellSouth’s network. Each Party will be responsible for maintenance and operation of all equipment/facilities on its side of the demarcation point. For 2-wire and 4-wire connections to BellSouth’s network, the demarcation point shall be a common block on the BellSouth designated conventional distributing frame (CDF). DSLi shall be responsible for providing, and a supplier certified by BellSouth (“Certified Supplier”) shall be responsible for installing and properly labeling/stenciling, the common block, and necessary cabling pursuant to Section 6. For all other terminations BellSouth shall designate a demarcation point on a per arrangement basis. DSLi or its agent must perform all required maintenance to equipment/facilities on its side of the demarcation point, pursuant to Section 5.6, following, and may self-provision cross-connects that may be required within the Collocation Space to activate service requests. At DSLi’s option and expense, a Point of Termination (“POT”) bay or frame may be placed in the Collocation Space, but will Version 3Q01: 10/22/01 not serve as the demarcation point. DSLi must make arrangements with a Certified Supplier for such placement. 5.5.1 In Tennessee, BellSouth will designate the point(s) of demarcation between DSLi’s equipment and/or network and BellSouth’s network. Each Party will be responsible for maintenance and operation of all equipment/facilities on its side of the demarcation point. For connections to BellSouth’s network, the demarcation point shall be a DSLi provided Point of Termination Bay (POT Bay) in a common area within the Premises. DSLi shall be responsible for providing, and a supplier certified by BellSouth (“DSLi’s Certified Supplier”) shall be responsible for installing and properly labeling, the POT Bay as well as the necessary cabling between DSLi’s collocation space and the demarcation point. DSLi or its agent must perform all required maintenance to equipment/facilities on its side of the demarcation point, pursuant to Section 5.6, following, and may self-provision cross-connects that may be required within the Collocation Space to activate service requests. BellSouth will negotiate alternative rates, terms and conditions related to the demarcation point in Tennessee in the event that DSLi desires to avoid the use of an intermediary device as contemplated by the Tennessee Regulatory Authority.

Demarcation Point. BellSouth will designate the point(s) of demarcation between DSLiPTLLC’s equipment and/or network facilities and BellSouth’s networknetwork facilities. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For 2-wire and 4-wire connections to BellSouth’s network, the demarcation point shall be a common block on the BellSouth BellSouth’s designated conventional distributing frame (CDF). DSLi PTLLC shall be responsible for providing, providing the necessary cabling and a supplier certified by PTLLC’s BellSouth (“Certified Supplier”) Supplier shall be responsible for installing and properly labeling/stenciling, stenciling the common block, block and any necessary cabling pursuant to identified in Section 67 of this Attachment. For all other terminations BellSouth shall designate a demarcation point on a per arrangement basis. DSLi PTLLC or its agent must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.10, following, and may self-provision cross-cross- connects that may be required within the its own Collocation Space to activate service requests. At DSLi’s option and expense, a Point of Termination (“POT”) bay or frame may be placed in the Collocation Space, but will Version 3Q012Q04: 10/22/01 not serve as the demarcation point. DSLi must make arrangements with a Certified Supplier for such placement.08/18/04 5.5.1 5.9.1 In Tennessee, BellSouth will designate the point(s) of demarcation between DSLiPTLLC’s equipment and/or network facilities and BellSouth’s networknetwork facilities. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For connections to BellSouth’s network, PTLLC may request that the demarcation point shall be a DSLi provided Point of Termination Bay (POT Bay) in a common area within the BellSouth Premises. DSLi , which PTLLC shall be responsible for providing, providing and a supplier certified by PTLLC’s BellSouth (“DSLi’s Certified Supplier”) Supplier shall be responsible for installing and properly labeling/stenciling, the POT Bay as well as installing the necessary cabling between DSLiPTLLC’s collocation space Collocation Space and the demarcation pointPOT Bay. DSLi PTLLC, its agent, or its agent PTLLC’s BellSouth Certified Supplier must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.6, following, point and may self-provision cross-cross- connects that may be required it requires within the its own Collocation Space to activate service requests. BellSouth will shall negotiate alternative rates, terms and conditions related to for the demarcation point in Tennessee in the event that DSLi Tennessee, if PTLLC desires to avoid the use of an a POT Bay or any other intermediary device as contemplated by the Tennessee Regulatory Authority.

Demarcation Point. BellSouth will designate the point(s) of demarcation between DSLiDukeNet’s equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For 2-wire and 4-wire connections to BellSouth’s network, the demarcation point shall be a common block on the BellSouth designated conventional distributing frame (CDF). DSLi DukeNet shall be responsible for providing, and a supplier certified by DukeNet’s BellSouth (“Certified Supplier”) Supplier shall be responsible for installing and properly labeling/stenciling, stenciling the common block, block and any necessary cabling pursuant to identified in Section 67 of this Attachment. For all other terminations terminations, BellSouth shall designate a demarcation point on a per arrangement basis. DSLi DukeNet or its agent must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-connects that may be required within the Collocation Space to activate service requests. At DSLi’s option and expense, a Point of Termination (“POT”) bay or frame may be placed in the Collocation Space, but will Version 3Q01: 10/22/01 not serve as the demarcation point. DSLi must make arrangements with a Certified Supplier for such placement. 5.5.1 5.6.1 In Tennessee, BellSouth will designate the point(s) of demarcation between DSLiDukeNet’s equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For connections to BellSouth’s network, the demarcation point shall be a DSLi DukeNet-provided Point of Termination Bay (POT Bay) in a common area within the Premises. DSLi DukeNet shall be responsible for providing, and a supplier certified by DukeNet’s BellSouth (“DSLi’s Certified Supplier”) Supplier shall be responsible for installing and properly labeling, /stenciling the POT Bay Bay, as well as installing the necessary cabling between DSLiDukeNet’s collocation space Collocation Space and the demarcation point. DSLi DukeNet or its agent must perform all required maintenance to equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-connects that may be required within the Collocation Space to activate service requests. BellSouth will negotiate alternative rates, terms and conditions related to the demarcation point in Tennessee Tennessee, in the event that DSLi DukeNet desires to avoid the use of an intermediary device as contemplated by the Tennessee Regulatory Authority. Version 1Q03: 02/28/03 5.7 DukeNet’s Equipment and Facilities. DukeNet, or if required by this Attachment, DukeNet‘s BellSouth Certified Supplier, is solely responsible for the design, engineering, installation, testing, provisioning, performance, monitoring, maintenance and repair of the equipment and facilities used by DukeNet which must be performed in compliance with all applicable BellSouth Specifications. Such equipment and facilities may include, but are not limited to, cable(s), equipment, and point of termination connections. DukeNet and its selected BellSouth Certified Supplier must follow and comply with all BellSouth requirements outlined in BellSouth’s TR 73503, TR 73519, TR 73572, and TR 73564.

Demarcation Point. BellSouth will designate the point(s) of demarcation between DSLiT- Mobile’s equipment and/or network and BellSouth’s network. Each Party will be responsible for maintenance and operation of all equipment/facilities on its side of the demarcation point. For 2-wire and 4-wire connections to BellSouth’s network, the demarcation point shall be a common block on the BellSouth designated conventional distributing frame (CDF). DSLi T-Mobile shall be responsible for providing, and a supplier certified by BellSouth (“T-Mobile’s BellSouth Certified Supplier”) shall be responsible for installing and properly labeling/stenciling, the common block, and necessary cabling pursuant to Section 66.12. For all other terminations BellSouth shall designate a demarcation point on a per arrangement basis. DSLi T-Mobile or its agent must perform all required maintenance to equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.4, following, and may self-provision cross-cross- connects that may be required within the Collocation Space to activate service requests. At DSLiT-Mobile’s option and expense, a Point of Termination (“POT”) bay or frame may be placed in the Collocation Space, but will Version 3Q01: 10/22/01 not serve as the demarcation point. DSLi T-Mobile must make arrangements with a BellSouth Certified Supplier for such placement. 5.5.1 5.3.1 In Tennessee, BellSouth will designate the point(s) of demarcation between DSLiT- Mobile’s equipment and/or network and BellSouth’s network. Each Party will be responsible for maintenance and operation of all equipment/facilities on its side of the demarcation point. For connections to BellSouth’s network, the demarcation point shall be a DSLi T-Mobile provided Point of Termination Bay (POT Bay) in a common area within the Premises. DSLi T-Mobile shall be responsible for providing, and a supplier certified by BellSouth (“DSLi’s Certified Supplier”) shall be responsible for installing and properly labeling, /stenciling the POT Bay as well as installing the necessary cabling between DSLiT-Mobile’s collocation space and the demarcation point. DSLi T-Mobile or its agent must perform all required maintenance to equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.4, following, and may self-provision cross-cross- connects that may be required within the Collocation Space to activate service requests. BellSouth will negotiate alternative rates, terms and conditions related to the demarcation point in Tennessee in the event that DSLi T-Mobile desires to avoid the use of an intermediary device as contemplated by the Tennessee Regulatory Authority.

Demarcation Point. BellSouth will designate the point(s) of demarcation between DSLiTeleconex’s equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For 2-wire and 4-wire connections to BellSouth’s network, the demarcation point shall be a common block on the BellSouth designated conventional distributing frame (CDF). DSLi Teleconex shall be responsible for providing, and a supplier certified by Teleconex’s BellSouth (“Certified Supplier”) Supplier shall be responsible for installing and properly labeling/stenciling, stenciling the common block, block and any necessary cabling pursuant to identified in Section 67 of this Attachment. For all other terminations terminations, BellSouth shall designate a demarcation point on a per arrangement basis. DSLi Teleconex or its agent must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-connects that may be required within the Collocation Space to activate service requests. At DSLi’s option and expense, a Point of Termination (“POT”) bay or frame may be placed in the Collocation Space, but will Version 3Q01: 10/22/01 not serve as the demarcation point. DSLi must make arrangements with a Certified Supplier for such placement. 5.5.1 5.6.1 In Tennessee, BellSouth will designate the point(s) of demarcation between DSLiTeleconex’s equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For connections to BellSouth’s network, the demarcation point shall be a DSLi Teleconex-provided Point of Termination Bay (POT Bay) in a common area within the Premises. DSLi Teleconex shall be responsible for providing, and a supplier certified by Teleconex’s BellSouth (“DSLi’s Certified Supplier”) Supplier shall be responsible for installing and properly labeling, /stenciling the POT Bay Bay, as well as installing the necessary cabling between DSLiTeleconex’s collocation space Collocation Space and the demarcation point. DSLi Teleconex or its Version 1Q03: 02/28/03 agent must perform all required maintenance to equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-cross- connects that may be required within the Collocation Space to activate service requests. BellSouth will negotiate alternative rates, terms and conditions related to the demarcation point in Tennessee Tennessee, in the event that DSLi Teleconex desires to avoid the use of an intermediary device as contemplated by the Tennessee Regulatory Authority.

Demarcation Point. BellSouth will designate the point(s) of demarcation between DSLi’s GulfPines’ equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For 2-wire and 4-wire connections to BellSouth’s network, the demarcation point shall be a common block on the BellSouth BellSouth’s designated conventional distributing frame (CDF). DSLi GulfPines shall be responsible for providingproviding the necessary cabling, and a supplier certified by GulfPines’ BellSouth (“Certified Supplier”) Supplier shall be responsible for installing and properly labeling/stenciling, stenciling the common block, block and any necessary cabling pursuant to identified in Section 67 of this Attachment. For all other terminations BellSouth shall designate a demarcation point on a per arrangement basis. DSLi GulfPines or its agent must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-connects that may be required within the its own Collocation Space to activate service requests. At DSLi’s option and expense, a Point of Termination (“POT”) bay or frame may be placed in the Collocation Space, but will Version 3Q01: 10/22/01 not serve as the demarcation point. DSLi must make arrangements with a Certified Supplier for such placement. 5.5.1 5.6.1 In Tennessee, BellSouth will designate the point(s) of demarcation between DSLi’s GulfPines’ equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For connections to BellSouth’s network, the demarcation point shall be a DSLi GulfPines-provided Point of Termination Bay (POT Bay) in a common area within the BellSouth Premises. DSLi GulfPines shall be responsible for providing, and a supplier certified by GulfPines’ BellSouth (“DSLi’s Certified Supplier”) Supplier shall be responsible for installing and properly labeling, /stenciling the POT Bay Bay, as well as installing the necessary cabling between DSLi’s collocation space Version 2Q03: 07/21/03 GulfPines’ Collocation Space and the demarcation point. DSLi GulfPines, its agent, or its agent GulfPines’ BellSouth Certified Supplier must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-connects that may be required within the its own Collocation Space to activate service requests. BellSouth will negotiate alternative rates, terms and conditions related to the demarcation point in Tennessee in the event that DSLi Tennessee, if GulfPines desires to avoid the use of an intermediary device as contemplated by the Tennessee Regulatory Authority.

Demarcation Point. BellSouth will designate the point(s) of demarcation between DSLiALCALL’s equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For 2-wire and 4-wire connections to BellSouth’s network, the demarcation point shall be a common block on the BellSouth BellSouth’s designated conventional distributing frame (CDF). DSLi ALCALL shall be responsible for providingproviding the necessary cabling, and a supplier certified by ALCALL’s BellSouth (“Certified Supplier”) Supplier shall be responsible for installing and properly labeling/stenciling, stenciling the common block, block and any necessary cabling pursuant to identified in Section 67 of this Attachment. For all other terminations BellSouth shall designate a demarcation point on a per arrangement basis. DSLi ALCALL or its agent must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-connects that may be required within the its own Collocation Space to activate service requests. At DSLi’s option and expense, a Point of Termination (“POT”) bay or frame may be placed in the Collocation Space, but will Version 3Q01: 10/22/01 not serve as the demarcation point. DSLi must make arrangements with a Certified Supplier for such placement. 5.5.1 5.6.1 In Tennessee, BellSouth will designate the point(s) of demarcation between DSLiALCALL’s equipment and/or network and BellSouth’s network. Each Party will be responsible for the maintenance and operation of all equipment/facilities on its side of the demarcation point. For connections to BellSouth’s network, the demarcation point shall be a DSLi ALCALL-provided Point of Termination Bay (POT Bay) in a common area within the “BellSouth Premises”. DSLi ALCALL shall be responsible for providing, and a supplier certified by ALCALL’s BellSouth (“DSLi’s Certified Supplier”) Supplier shall be responsible for installing and properly labeling, /stenciling the POT Bay Bay, as well as installing the necessary cabling between DSLiALCALL’s collocation space Collocation Space and the demarcation point. DSLi ALCALL, its agent, or its agent ALCALL’s BellSouth Certified Supplier must perform all required maintenance to the equipment/facilities on its side of the demarcation point, pursuant to Section 5.65.7, following, and may self-provision cross-connects that may be required within the its own Collocation Space to activate service requests. BellSouth will negotiate alternative rates, terms and conditions related to the demarcation point in Tennessee in the event that DSLi Tennessee, if ALCALL desires to avoid the use of an intermediary device as contemplated by the Tennessee Regulatory Authority.