Common use of Design Criteria Clause in Contracts

Design Criteria. The Engineer shall prepare all work in accordance with the latest version of applicable State’s procedures, specifications, manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which include: the PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition), and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, (latest Edition). In addition, the Engineer shall follow the State’s District guidelines in developing the Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74-DA27-4A02-AC2A-90D8CB2811D6 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s construction contract bidding and awarding process. The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.

Design Criteria. The Engineer shall prepare all work in accordance with the latest version of applicable State’s procedures, specifications, manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which include: the PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition), and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, (latest Edition). In addition, the Engineer shall follow the State’s District guidelines in developing the Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74-DA27-4A02-AC2A-90D8CB2811D6 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s construction contract bidding and awarding process. The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional DocuSign Envelope ID: 639E691C-A3CC-4853-AD7B-C269303B6046 exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.

Design Criteria. The Engineer shall prepare all work in accordance with the latest version of applicable State’s 's procedures, specifications, manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which specifications to include: the PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition), and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, Street (latest Edition). In addition, the Engineer shall DocuSign Envelope ID: 67397975-F81B-4755-90E3-12120FAB096F WAs Used Legacy Contract No. 04-7SDP5001 PeopleSoft Contract No. 7582 follow the guidelines shown in Developing PS&E for a particular District which the Engineer may download from the State’s District guidelines in developing the 's website. The Engineer shall prepare each Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74-DA27-4A02-AC2A-90D8CB2811D6 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s 's construction contract bidding and awarding process. The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.

Design Criteria. The Engineer shall prepare all work in accordance with the latest version of applicable State’s procedures, specifications, manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which include: the State’s PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition)Bridges, 2014, and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, (latest Edition). In addition, the Engineer shall follow the State’s District guidelines in developing the Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74-DA27-4A02-AC2A-90D8CB2811D6 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s construction contract bidding and awarding process. The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.. DocuSign Envelope ID: 892480A0-816A-4F72-BEA4-A48D7E8902E6

Design Criteria. The Engineer shall prepare all work in accordance with the latest (on date of contract execution) version of applicable State’s procedures, specifications, DocuSign Envelope ID: D78C9312-D95C-4FD3-B00A-7CFCC10A2DB4 manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which include: the PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition), and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, (latest Edition). In addition, the Engineer shall follow the State’s District guidelines in developing the Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74-DA27-4A02-AC2A-90D8CB2811D6 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s construction contract bidding and awarding process. The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.

Design Criteria. The Engineer shall prepare all work in accordance with the latest version of applicable State’s procedures, specifications, manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which include: the PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition), and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, (latest Edition). In addition, the Engineer shall follow the State’s District guidelines in developing the Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74798F7E2C-0AE6-DA2740EE-4A02BFB4-AC2A-90D8CB2811D6 3AB848988972 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s construction contract bidding and awarding process. The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.

Design Criteria. The Engineer shall prepare all work in accordance with the latest version of applicable State’s procedures, specifications, manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which include: the PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition), and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, (latest Edition). In addition, the Engineer shall follow the State’s District guidelines in developing the Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74-DA27-4A02-AC2A-90D8CB2811D6 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s construction contract bidding and awarding process. DocuSign Envelope ID: 8B0EE02C-E455-423C-9476-3FA4EBD98809 The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.

Design Criteria. The Engineer shall prepare all work in accordance with the latest version of applicable State’s procedures, specifications, manuals, guidelines, standard drawings, and standard specifications or previously approved special provisions and special specifications, which include: the State’s PS&E Preparation Manual, Roadway Design Manual, Hydraulic Design Manual, the Texas Manual on Uniform Traffic Control Devices (TMUTCD), Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (latest Edition)Bridges, 2014, and other State approved manuals. When design criteria are not identified in State manuals, the Engineer shall notify the State and refer to the American Association of State Highway and Transportation Officials (AASHTO), A Policy on Geometric Design of Highways and Street, (latest Edition). In addition, the Engineer shall follow the State’s District guidelines in developing the Plan, Specification, and Estimate DocuSign Envelope ID: F43CDC74-DA27-4A02-AC2A-90D8CB2811D6 (PS&E) package. The Engineer shall prepare each PS&E package in a form suitable for letting through the State’s construction contract bidding and awarding process. The Engineer shall identify, prepare exhibits and complete all necessary forms for each Design Exception and Waiver required within project limits prior to the 30% project completion submittal. The Engineer shall submit each exception and waiver to the State for coordination and processing of approvals. If subsequent changes require additional exceptions, the Engineer shall notify the State in writing as soon as possible after identification of each condition that may warrant a design exception or waiver.. DocuSign Envelope ID: 5410F844-7202-4C91-B48D-AEAE41F0DC79