DEVELOPING PARTY COMPOUNDS Sample Clauses

DEVELOPING PARTY COMPOUNDS. With respect to Developing Party Compounds, responsibilities for development, including the discretion to continue, shall be solely the responsibility of the developing party. Sections 3.4 (except with respect to the notice provision) and 3.6 shall not be applicable, but provisions in Exhibit D shall be applicable, as provided therein. [*] HPI shall grant a license, or sublicense, if available, subject to any necessary third party approval and license requirements, as well as then existing third party rights, to RiboGene under the HPI Proprietary Rights to make, have made, use and sell Products incorporating a Developing Party Compound or derivatives thereof for the Target if RiboGene is the developing party. If HPI is the developing party of a Developing Party Compound, then HPI shall have access to the RiboGene Assay(s) with respect to such Developing Party Compound and RiboGene shall grant an exclusive license or sublicense, if available, to HPI under the RiboGene Proprietary Rights to make, have made, use and sell Products incorporating a Developing Party Compound or derivatives thereof. The non-developing party will use reasonable efforts to perform any remaining obligations in a timely manner for the developing party. So long as HPI or its sublicenses is diligently pursuing development of a Developing Party Compound, RiboGene will not make the Assay used to identify the Developing Party Compound or any usage therefor available to a third party for purposes of screening combinatorial libraries similar to the Combinatorial Libraries at least for the Targets of the Developing Party Compound, unless RiboGene is required to do so by a third party agreement existing at the time that HPI became the developing party of the Developing Party Compound.
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to DEVELOPING PARTY COMPOUNDS

  • Third Party Components The Products and Services may contain third party components (including open source software) subject to separate license agreements. To the limited extent a third party license expressly supersedes this XXXX, such third party license governs Customer’s use of that third party component.

  • Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.

  • Development and Commercialization Subject to Sections 4.6 and 4.7, Fibrocell shall be solely responsible for the development and Commercialization of Fibrocell Products and Improved Products. Fibrocell shall be responsible for all costs incurred in connection with the Fibroblast Program except that Intrexon shall be responsible for the following: (a) costs of establishing manufacturing capabilities and facilities in connection with Intrexon’s manufacturing obligation under Section 4.6 (provided, however, that Intrexon may include an allocable portion of such costs, through depreciation and amortization, when calculating the Fully Loaded Cost of manufacturing a Fibrocell Product, to the extent such allocation, depreciation, and amortization is permitted by US GAAP, it being recognized that the majority of non-facilities scale-up costs cannot be capitalized and amortized under US GAAP); (b) costs of basic research with respect to the Intrexon Channel Technology and Intrexon Materials (i.e., platform improvements) but, for clarity, excluding research described in Section 4.7 or research requested by the JSC for the development of a Fibrocell Product or an Improved Product (which research costs shall be reimbursed by Fibrocell); (c) [*****]; and (d) costs of filing, prosecution and maintenance of Intrexon Patents. The costs encompassed within subsection (a) above shall include the scale-up of Intrexon Materials and related active pharmaceutical ingredients for clinical trials and Commercialization of Fibrocell Products undertaken pursuant to Section 4.6, which shall be at Intrexon’s cost whether it elects to conduct such efforts internally or through Third Party contractors retained by either Intrexon or Fibrocell (with Intrexon’s consent).

  • Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • Joint Patent Rights If not already established under the Research Collaboration Agreement, prior to either Party filing any Patent Right disclosing Joint Program Technology or Joint Probody Platform Improvements, the Parties shall establish a patent committee (the “Patent Committee”) comprised of at least one (1) representative of each Party for the purpose of facilitating the preparation, filing, prosecution, maintenance and defense of Joint Patent Rights. As agreed upon by the Parties, meetings of the Patent Committee may be face-to-face or may be conducted by teleconferences or videoconferences, from time to time as needed. The Patent Committee will be the forum through which the Parties coordinate their respective obligations to each other described in Sections 5.2.2 and 5.2.3 hereof and in this Section. In the event the Parties conceive or generate any Joint Program Technology or Joint Probody Platform Improvements, the Parties shall promptly meet to discuss and determine, based on mutual consent, whether to seek patent protection thereon, which Party will control filing, prosecution and maintenance of such patents and how to pay for the filing, prosecution and maintenance of such patents. It is presumed that ImmunoGen will control filing, prosecution and maintenance of Joint Patent Rights claiming Joint Program Technology or Joint Conjugation Probody Platform Improvements, and that CytomX will control filing, prosecution and maintenance of Joint Patent Rights claiming Joint Unconjugated Probody Platform Improvements. Neither Party will file any Joint Patent Right without the prior written consent of the other Party, which consent shall not be unreasonably withheld, conditioned or delayed. The Party controlling filing and prosecution of any such Joint Patent Right (a) shall keep the other Party informed regarding each Patent Right, (b) shall consider in good faith any recommendations made by the other Party in regard to the filing, prosecution or maintenance of any such Patent Right and (c) shall not unreasonably refuse to incorporate any recommendations made by the other Party in regard to such filing, prosecution or maintenance.

  • Research Collaboration 3.7.1 Aarvik shall carry out the activities of each Work Item and deliver the required Data Package and/or deliverables in accordance with the applicable SOW. Without limiting the generality of the foregoing, Aarvik shall, in accordance with the applicable SOWs and the timeline approved by JRC, apply the Aarvik IP to (i) design and synthesize Collaboration Compounds, and (ii) by itself or through subcontractor(s), [***]. During the Research Term, if any Party identifies any Third Party Patent or Know-How that is necessary or reasonably useful for any activity under the SOWs but has not been included in the Aarvik IP, then such Party shall immediately inform the other Party and the Parties shall discuss in good faith the need of obtaining a license from such Third Party. 3.7.2 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver the Data Packages and all other deliverables required under the [***], as well as the results of the Patentability and FTO Analysis as described in Section 3.2.3, to ArriVent. ArriVent shall have the sole discretion to decide whether or not to advance any Collaboration Compound and which Collaboration Compound(s) will be advanced for further studies beyond the [***]. ArriVent shall inform Axxxxx of its decision in writing. If AxxxXxxx decides to advance the Collaboration Program to [***], ArriVent shall make the payment for the [***] pursuant to Section 6.2.1. 3.7.3 If, upon completion of the [***] for the Collaboration Program, AxxxXxxx decides not to advance the Collaboration Program to [***], ArriVent may terminate the Collaboration Program. If AxxxXxxx decides to advance the Collaboration Program to [***], ArriVent shall make the payment for the [***] pursuant to Section 6.2.1. 3.7.4 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver all Data Packages and deliverables required under the [***] to ArriVent. ArriVent shall have the sole discretion to decide whether or not to advance any Collaboration Compound and which Collaboration Compound(s) will be advanced for further studies beyond the [***]. ArriVent shall inform Axxxxx of its decision in writing. 3.7.5 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver all Data Packages and deliverables required under the [***] to ArriVent. 3.7.6 Within [***] ([***]) days after completion of the [***], Aarvik shall deliver to ArriVent a full report on all key results and findings of the Collaboration Program, and such other data, results and information as ArriVent may deem necessary for it to determine whether or not to exercise the Option (the “Full Report”).

  • Collaboration 31.1 If the Buyer has specified in the Order Form that it requires the Supplier to enter into a Collaboration Agreement, the Supplier must give the Buyer an executed Collaboration Agreement before the Start date. 31.2 In addition to any obligations under the Collaboration Agreement, the Supplier must: 31.2.1 work proactively and in good faith with each of the Buyer’s contractors 31.2.2 co-operate and share information with the Buyer’s contractors to enable the efficient operation of the Buyer’s ICT services and G-Cloud Services

  • Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.

  • Patent Rights The State and the U. S. Department of Transportation shall have the royalty free, nonexclusive and irrevocable right to use and to authorize others to use any patents developed by the Engineer under this contract.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!