DIVISION CT. Special Provisions In accordance with AT19, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supplemented or modified by each particular provision included in this Division.
DIVISION CT. Special Provisions In accordance with AT19, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supplemented or modified by each particular provision included in this Division. Tub Run Middle Reoffer Timber Sale Attachment BT6.33 10/01 LOGGING AND MAINTENANCE OPERATIONS SIGNING STANDARDS All signs must be manufactured & installed as specified in the FHWA "Manual on Uniform Traffic Control Devices" (MUTCD) & FS publication "Standards for Forest Service Signs & Posters"( EM 7100-15). SIGN STANDARDS SHAPE & COLOR: Generally, signs for logging and maintenance operations are either diamond-shaped or rectangular. All signs are reflective orange background with black legend and border unless shown otherwise. Handpainted, homemade signs are not legal. Fluorescent paint is not reflectorized. SUBSTRATE: Sign substrate material may be High Density Overlay (HDO) Plywood, Aluminum, Fiberglass Reinforced Plastic, Corrugated Plastic or Roll-up Fabrics. SAMPLE SIGN SIZE: Sign size is a factor of speed and MUTCD & FS standards. Where conditions of speed, volume, or special hazard require greater visibility or emphasis, larger signs should be used. Minimum sizes for the most common signs can be found in Figure 4. Refer to the EM-7100-15 for additional sign sizes.
DIVISION CT. Special Provisions
DIVISION CT. Special Provisions In accordance with AT19, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supplemented or modified by each particular provision included in this Division. CT2.2 - UTILIZATION AND REMOVAL OF INCLUDED TIMBER (09/2002) BT2.2(b) notwithstanding, bucking lengths shall be varied to ensure that the maximum sawlog piece that may be left is 2 feet and that the maximum small roundwood piece that may be left is 5 feet. Where cut trees are identified by paint, the Purchaser shall leave stumps of a minimum height to avoid obliterating paint markings that indicate individual trees to be cut. CT2.3# - RESERVE TREES (04/2004) Notwithstanding the designations for cutting under BT2.31, BT2.32, BT2.33, or BT2.34, live or dead RCW Cavity tree reserve trees or groups of reserve trees within such cutting units or clearings shall be left uncut. Such Reserve trees are identified by band with white paint and shall be protected in accordance with CT6.32#. Units with reserve trees are shown on the Sale Area Map. CT2.302# - PAYMENT UNIT BOUNDARIES (09/2004) The boundaries of Payment Units are designated as shown in the following table. The trees used for boundary designation are not to be cut. See Table CT2.302# - Payment Unit Boundaries, Payment Unit Boundary Designation Table Sale Name: Fort Gadsden Page 142 Table CT2.302# -- Payment Unit Boundary Designation Table Payment Unit Paint Color Designation CT2.355# - INDIVIDUAL TREES (08/2004) BT2.35 notwithstanding, the following individual trees are Marked with paint above and below xxxxx height: Cut Tree Marking. Individual trees to be cut are Marked in all or parts of the following Payment Units. Areas of cut tree marking are shown on the Sale Area Map with the symbol CTM. See Table CT2.355# - Individual Trees, Cut Tree Marking Leave Tree Marking. Individual trees to be left uncut are Marked in all or parts of the following Payment Units. Unmarked trees meeting Utilization Standards in AT2 shall be cut. Areas of leave tree marking are shown on the Sale Area Map with the symbol LTM. See Table CT2.355# - Individual Trees, Leave Tree Marking Sale Name: Fort Gadsden Page 144 Table 2.355# -Individual Trees, Cut Tree Marking Cut Tree Marking Individual trees are Marke...
DIVISION CT. Special Provisions In accordance with AT19, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supplemented or modified by each particular provision included in this Division. CT2.2 - UTILIZATION AND REMOVAL OF INCLUDED TIMBER (09/2002) BT2.2(b) notwithstanding, bucking lengths shall be varied to ensure that the maximum sawlog piece that may be left is 2 feet and that the maximum small roundwood piece that may be left is 5 feet. Where cut trees are identified by paint, the Purchaser shall leave stumps of a minimum height to avoid obliterating paint markings that indicate individual trees to be cut. CT2.302# - PAYMENT UNIT BOUNDARIES (09/2004) The boundaries of Payment Units are designated as shown in the following table. The trees used for boundary designation are not to be cut. See Table CT2.302# - Payment Unit Boundaries, Payment Unit Boundary Designation Table SALE NAME: MUDFLAT PAGE 142 CT2.302# - PAYMENT UNIT BOUNDARIES.
DIVISION CT. Special Provisions In accordance with AT19, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supplemented or modified by each particular provision included in this Division. Page 140a Sale Name: Lang Thin TRAFFIC CONTROL PLAN AND SPECIFICATIONS PURSUANT TO BT6.33 SAFETY Unless otherwise agreed, the following measures are required to provide adequate warning of hazards for users of roads and trails adjacent to Purchaser's Operations.
DIVISION CT. Special Provisions In accordance with AT22, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that iden- tifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supple- mented or modified by each particular provision included in this Division. CT2.352# - DESIGNATION BY SPECIES AND DIAMETER (01/2021) Trees that meet Utilization Standards are designated for cutting, as shown on the Tree Designation Table and Contract Area Map, except trees Marked with orange color paint or described to be left uncut. Tree Designation Table Additional trees to be cut, if any, are Marked with blue color paint. All dead trees, deciduous trees, pre-settlement trees, white pine, or oak shall be left as leave trees, unless Marked with blue color paint. Cutting unit boundary trees if any, shall be left uncut. Cutting unit boundary trees are described in CT2.357# and/or are Marked with orange color paint. Other trees that shall be left uncut are Marked with N/A color paint. Sample Diameters are measured outside bark at 54 inches above ground on the uphill side of the tree. Diameters shall be measured using a "diameter equivalents of circumference" tape measure, caliper, electronic laser method or equivalent method by agreement. Contract Name: Promontory Stewardship Reoffer Page 141 Contract 2400-13T,(10/19) Sample Tree Designation Table CT2.352# Cutting Unit # *Description All Boundaries – two horizontal orange paint bands at approximately eye level facing into the unit and two xxxxx marks on each side in line with the boundary. No deciduous trees, pre- settlement trees, Aspen, or dead trees shall be cut unless otherwise approved by the Sale Administrator. 1,2,13,14,15,18 LTM - 5.0” and greater 3,5.6,8,21,10,16,17 LTM – 5.0” – 23.9” – No trees 24.0”+ DBH shall be cut. 4,7,12,19,20 LTM – 5.0” – 23.9” – No trees 24.0”+ DBH shall be cut. 9,11 LTM – 5.0” – 8.9” – Leave all trees > 9”. No white pine is permitted to be cut. Contract Name: Promontory Stewardship Reoffer Page 142 Contract 2400-13T,(10/19) CT2.357# - INDIVIDUAL TREES (LEAVE TREE MARKING) (09/2015) In payment unit(s) ALL shown on the Sale Area Map all live trees meeting minimum tree diameter specifications of AT.2 are designated for cutting except trees reserved from cutting. Trees reserved from cutting have been Marked with orange paint. ...
DIVISION CT. Special Provisions In accordance with AT22, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that iden- tifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supple- mented or modified by each particular provision included in this Division. SAMPLE CT2.302# - BOUNDARY TREES (10/2019) Boundary trees for all harvest units have been designated with orange paint marks above and below xxxxx height. Boundary trees shall not be cut. CT2.355# - INDIVIDUAL TREES, CUT TREE MARKING (06/2009) Individual trees to be cut are Marked with indicated color above and below xxxxx height in all or parts of the following Payment Units. Areas of Cut Tree Marking are shown on the Contract Area Map with the symbol "CTM." PAYMENT UNIT(S) PAINT COLOR Contract Name: Back Fork IRTC Page 141 Contract 2400-13T,(10/19) SAMPLE R9-CT2.355# - INDIVIDUAL TREES, CUT TREE MARKING (6/09) Individual trees to be cut are Marked with indicated color above and below xxxxx height in all or parts of the following Payment Unit(s). Areas of cut tree marking are shown on the Contract Area Map with the symbol “CTM.” Payment Unit Paint Color 02 Blue 03 Blue 04 Blue 05 Blue 06 Blue 07 Blue 08 Blue 09 Blue 15 Blue/Yellow Contract Name: Back Fork IRTC Page 142 Contract 2400-13T, (10/19) SAMPLE CT2.356# - INDIVIDUAL TREES, LEAVE TREE MARKING (06/2009) Individual trees which are NOT TO BE CUT are Marked with indicated color above and below xxxxx height in all or parts of the following Payment Units. Areas of Leave Tree Marking are shown on the Contract Area Map with the symbol "LTM." Payment Unit Paint Color Contract Name: Back Fork IRTC Page 143 Contract 2400-13T,(10/19) SAMPLE R9-CT2.356# - INDIVIDUAL TREES, LEAVE TREE MARKING (6/09) Individual trees which are NOT TO BE CUT are Marked with indicated color above and below xxxxx height in all or parts of the following Payment Unit(s). Areas of leave tree marking are shown on the Contract Area Map with the symbol “LTM.” Payment Unit Paint Color 01 Orange 11 Orange 12 Orange 13 Orange 14 Orange Contract Name: Back Fork IRTC Page 144 Contract 2400-13T, (10/19) SAMPLE CT3.34 - EMERGENCY RATE REDETERMINATION (01/2021) Forest Service shall redetermine rates if, upon Purchaser's application, Forest Service determines that, because of changes in the timber market since the award...
DIVISION CT. Special Provisions In accordance with AT19, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supplemented or modified by each particular provision included in this Division. 140 CT2.35# (OPTION 1) - INDIVIDUAL TREE DESIGNATION (06/2010) All trees marked with Forest Service blue paint that are located within portions no more than 375 feet north of Forest Service Road 2600 as delineated on the ground with placards at Cutting Unit start/stop points along the road and blue flagging along stream buffers which meet the minimum tree diameter stated in AT2 are designated for cutting. Additional timber to be cut, if any, will be designated for cutting in accordance with BT2.37. Leave trees, Marked with white or orange Forest Service paint , or identified by no Forest Service paint are not to be cut, unless designated by the Forest Service. CT4.211 - DOWNPAYMENT (06/2007) SAMPLE The downpayment amount shown in AT15 may not be applied toward any other payment required under the provisions of this contract, except damages determined pursuant to BT9.4, transferred to other timber sales, or refunded until (a) stumpage value representing 25 percent of the total bid value of the timber sale is shown on Timber Sale Account to have been cut, removed, and paid for, or (b) the estimated value remaining to be cut and removed, as shown on Timber Sale Account, is equal to or less than the amount of the downpayment, or (c) if 36 CFR 223.49(e) is applicable, the estimated value remaining to be cut and removed, as shown on Timber Sale Account, is equal to or less than the amount of the downpay-ment. For lump sum timber sales, the downpayment may be applied to payment for release of the single payment unit. If Forest Service makes a determination that this contract should not have been included under in- creased downpayment requirements (36 CFR 223.49(e)), the downpayment shall be revised and applied in accordance with 36 CFR 223.49(f). CT4.212 - TEMPORARY REDUCTION OF DOWNPAYMENT (08/2009) Notwithstanding BT4.211 or CT4.211, upon the Purchaser's written request Forest Service may temporarily reduce the downpayment when Purchaser's scheduled operations are delayed or interrupted for 30 or more consecutive days, or the contract term...
DIVISION CT. Special Provisions In accordance with AT19, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division BT. The numbers after the CT (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division BT that is being supplemented or modified by each particular provision included in this Division. Sale Name: White Aspen Page 141 CT2.35# - DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES (06/2012) Trees are designated for cutting under BT2.35 only if designated as shown in the Timber Designation table below. The boundaries of Subdivisions/Payment Units and Cutting Units are designated as shown in the Boundary Designation table below. Trees used for boundary designation are not to be cut. SPECIFICATIONS PURSUANT TO CT2.35# - DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES Sale Name: White Aspen SPECIFICATIONS PURSUANT TO CT2.35# - DESIGNATION OF TIMBER. CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES Timber Designation Table Cutting Unit/ Subdivision/Area/ Payment Unit Tree Paint Color Designation or Specification Sale Area Green Hazard Tree. Notwithstanding B2.32 all dead and unstable live trees which are leaning towards a road or are otherwise hazardous to a road, and are sufficiently tall to reach Purchaser's landings or the roadbed of National Forest System roads within Sale Area, shall be felled by Purchaser when Marked in the specified paint color above and below xxxxx height by Forest Service in advance of felling any other timber in the vicinity. Pieces meeting Utilization Standards from such dead and unstable live trees shall be removed unless Purchaser is notified in writing that removal would cause unacceptable damage to areas requiring special protection such as residual timber, roads, administrative sites, streamside management zones, and areas identified on Sale Area Map or on the ground. All Units Blue Or Green Individual Tree Mark. Individual trees are designated for cutting only if Marked above and below xxxxx height with the specified paint color. Leave Tree Mark. All live conifer are designated for cutting unless Marked as leave trees. Leave trees are Marked above and below xxxxx height with the specified paint color. Sale Area Map indicates areas plainly identified on the ground where leave trees are Marked to be le...
