Document Submission Method During Application and Document Format Sample Clauses

Document Submission Method During Application and Document Format. 1.2.1. Supplementary documents to be provided during the applications and other technical documentation shall only be provided in digital form and files shall only be sent to e mail addresses using xxxxxxx-xxxxxxx.xx domain. Only controlled copies of documents shall be shared with SZUTEST Konformitätsbewertungsstelle GmbH. Hard copies of Technical Documentation shall not be accepted. All submitted Technical Documentation and any related correspondence for application (including test results) shall be in English language. 1.2.2. Documents should be provided as paginated, fully searchable bookmarked PDF files. Other software formats may be acceptable, but it may be result of delay while files converting to fully searchable bookmarked PDF format. PDF files and attachments should not be file protected or locked. For scanning directly from printed pages should utilise Optical Character Recognition (OCR). 1.2.3. File names of Technical Documentation should be reflected the information covered within that part and documents. 1.2.4. Signatures are required for any signed document in the documentation. Signatures can be handled as below:
AutoNDA by SimpleDocs
Document Submission Method During Application and Document Format. 1.2.1. Supplementary documents to be provided during the applications and other technical documentation shall only be provided in digital form and files shall only be sent to e mail addresses using xxxxxxx-xxxxxxx.xx domain. Only controlled copies of documents 1.2.2. Documents should be provided as paginated, fully searchable bookmarked PDF files. Other software formats may be acceptable, but it may be result of delay while files converting to fully searchable bookmarked PDF format. PDF files and attachments should not be file protected or locked. For scanning directly from printed pages should utilise Optical Character Recognition (OCR). 1.2.3. File names of Technical Documentation should be reflected the information covered within that part and documents. 1.2.4. Signatures are required for any signed document in the documentation. Signatures can be handled as below:

Related to Document Submission Method During Application and Document Format

  • Application Process The employees wishing to enter into a job share arrangement will apply in writing to the Employer and forward a copy to the Union outlining the proposed commencement date of the job share, how the hours and days of work will be shared and how communication and continuity of work will be maintained. The Employer shall communicate a decision on a job share request in writing to the applicants. Applications to Job Sharing shall not be unreasonably denied.

  • Application Procedure 7.4.1. Application Priority........................................ 7.4.2. [Reserved].................................................. 7.4.3. Advance Payments............................................

  • Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.

  • Application Procedures i) An employee applies for a listing on the system-wide registry through the employee’s Human Resources Department by completing the form in Appendix A. ii) The institution will immediately forward the completed form to the PSEA who will list eligible employees on the system-wide registry. iii) A registrant is responsible to ensure the information is current and to immediately notify the Employer and the local Union if the registrant is no longer available for employment through the Registry.

  • Filing of Patent Applications Each Party will make timely decisions regarding the filing of Patent Applications on the CRADA Subject Inventions made solely by its employee(s), and will notify the other Party in advance of filing. Collaborator will have the first opportunity to file a Patent Application on joint CRADA Subject Inventions and will notify PHS of its decision within sixty (60) days of an Invention being reported or at least thirty (30) days before any patent filing deadline, whichever occurs sooner. If Collaborator fails to notify PHS of its decision within that time period or notifies PHS of its decision not to file a Patent Application, then PHS has the right to file a Patent Application on the joint CRADA Subject Invention. Neither Party will be obligated to file a Patent Application. Collaborator will place the following statement in any Patent Application it files on a CRADA Subject Invention: “This invention was created in the performance of a Cooperative Research and Development Agreement with the [INSERT into Agency’s model as appropriate: National Institutes of Health, Food and Drug Administration, Centers for Disease Control and Prevention], an Agency of the Department of Health and Human Services. The Government of the United States has certain rights in this invention.” If either Party files a Patent Application on a joint CRADA Subject Invention, then the filing Party will include a statement within the Patent Application that clearly identifies the Parties and states that the joint CRADA Subject Invention was made under this CRADA.

  • APPLICATION AND PARTIES BOUND 5.1 The parties bound by this Agency Specific Agreement are the Civil Service Association of WA Inc and the Director General of the Department of Racing, Gaming and Liquor. 5.2 This Agency Specific Agreement does not replace the General Agreement. 5.3 This Agency Specific Agreement shall apply to all employees who are members or eligible to be members of the Union and who are covered by the General Agreement and the Award. 5.4 This Agency Specific Agreement shall be read in conjunction with the Award and the General Agreement. 5.5 Except where the General Agreement identifies conditions as core, the Agency Specific Agreement will prevail over the General Agreement and the Award to the extent of any inconsistencies. 5.6 At the date of registration the approximate number of employees covered by this Agency Specific Agreement is 16.

  • Application Submission Submissions of a rental application does not guarantee approval or acceptance. It does not bind us to accept the application or to sign a Lease contact.

  • Content of Fund Documents The Trust and the Distributor shall be responsible for the content and substance of the Fund Documents as provided to the Company, including, but not limited to, the accuracy and completeness of the Fund Documents. Without limiting the generality of the foregoing in any manner, the Trust and the Distributor shall be responsible for ensuring that the Fund Documents as provided to the Company: (a) Meet the applicable standards of the 1933 Act, the Securities Exchange Act of 1934, as amended; the 1940 Act; and all rules and regulations under those Acts; and (b) Do not contain any untrue statements of a material fact or omit to state a material fact necessary in order to make the statements made, in light of the circumstances under which they are made, not misleading.

  • Alternative Work Schedules Employees may request alternative work schedules such as a nine (9) day - 80 hour two week schedule or a four (4) day - 40 hour week schedule. Management will respond to an employee's request within 15 calendar days. Any changes from existing work schedules will be based on the needs of the service as determined by Management. Employees covered by the Fair Labor Standards Act will not be placed on alternate work schedules that mandate the payment of overtime under the Act.

  • Instructional Materials A. The Board recognizes that appropriate texts, library reference facilities, maps and globes, laboratory equipment, audio-visual equipment, art supplies, athletic equipment, current periodicals, standard tests and questionnaires, computers, and similar materials are the tools of the teaching profession. B. Efforts shall be continued to seek and use instructional materials which reflect the contribution and presence of diverse ethnic and cultural groups. C. 1. Selection of instructional materials for each school shall be made by a committee of teachers chosen by the faculty within that school.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!