Documentation Corrections. Microsoft (either itself or through a third party) will correct any inaccuracies or omissions in the Technical Documentation within a reasonable time frame.
Documentation Corrections Sample Clauses
Related to Documentation Corrections
Documentation and compliance (a) The data importer shall promptly and adequately deal with enquiries from the data exporter that relate to the processing under these Clauses. (b) The Parties shall be able to demonstrate compliance with these Clauses. In particular, the data importer shall keep appropriate documentation on the processing activities carried out on behalf of the data exporter. (c) The data importer shall make available to the data exporter all information necessary to demonstrate compliance with the obligations set out in these Clauses and at the data exporter’s request, allow for and contribute to audits of the processing activities covered by these Clauses, at reasonable intervals or if there are indications of non-compliance. In deciding on a review or audit, the data exporter may take into account relevant certifications held by the data importer.
Project Documentation All documentation provided to the City other than Project drawings shall be furnished on a Microsoft compatible compact disc.
Tax Documentation For the purposes of Sections 4(a)(i) and 4(a)(ii) of the Agreement, Counterparty shall provide to Dealer a valid and duly executed U.S. Internal Revenue Service Form W-9, or any successor thereto, completed accurately and in a manner reasonably acceptable to Dealer and, in particular, with the “corporation” box checked on line 3 thereof (i) on or before the date of execution of this Confirmation; (ii) promptly upon reasonable demand by Dealer; and (iii) promptly upon learning that any such tax form previously provided by Counterparty has become inaccurate or incorrect. Additionally, Counterparty shall, promptly upon reasonable request by Dealer, provide, such other tax forms and documents, accurately completed and in a manner reasonably acceptable to Dealer, that may be required or reasonably requested to allow Dealer to make a payment under this Confirmation, including any Credit Support Document, without any deduction or withholding for or on account of any Tax or with such deduction at a reduced rate. For the purposes of Sections 4(a)(i) and 4(a)(ii) of the Agreement, Dealer shall provide to Counterparty a valid and duly executed U.S. Internal Revenue Service Form W-9 or W-8ECI, or any successor thereto, completed accurately and in a manner reasonably acceptable to Counterparty and, in particular, with the “corporation” box checked on line 3 or 4 thereof, (i) on or before the date of execution of this Confirmation; (ii) promptly upon reasonable demand by Counterparty; and (iii) promptly upon learning that any such tax form previously provided by Dealer has become inaccurate or incorrect. Additionally, Dealer shall, promptly upon reasonable request by Counterparty, provide such other tax forms and documents, accurately completed and in a manner reasonably acceptable to Counterparty, that may be required or reasonably requested to allow Counterparty to make a payment under this Confirmation, including any Credit Support Document, without any deduction or withholding for or on account of any Tax or with such deduction at a reduced rate.
Medical Documentation The teacher must supply a letter from a medical 3 doctor, who treated the patient, stating that in his/her opinion, there is a strong 4 probability that the illness was contracted at school.
Closing Documentation The Parent shall have received the --------------------- following documents, agreements and instruments from the Company: (i) an opinion of Xxxx Xxxx Xxxx & Freidenrich LLP, dated the Closing Date and addressed to the Parent and Newco, in substantially the form of Exhibit F hereto; --------- (ii) certificates dated as of a recent date from the Secretary of State of the States of Delaware and any other applicable states to the effect that each of the Company and its Subsidiaries is duly incorporated and in good standing in such state and stating that the Company and its Subsidiaries owes no franchise taxes in such state and listing all documents of the Company and its Subsidiaries on file with said Secretary of State; (iii) a copy of the Certificate of Incorporation of the Company, including all amendments thereto, certified as of a recent date by the Secretary of State of the State of Delaware; (iv) evidence, reasonably satisfactory to the Parent, of the authority and incumbency of the persons acting on behalf of the Company in connection with the execution of any document delivered in connection with this Agreement; (v) Uniform Commercial Code Search Reports on Form UCC-11 with respect to the Company and its Subsidiaries from the states and local jurisdictions where the principal place of business of the Company and its Subsidiaries and their respective assets are located, the search reports of which shall confirm compliance with Section 3.15 (and Schedule thereto) of this Agreement; (vi) the corporate minute books and stock record books of the Company and its Subsidiaries; (vii) estoppel letters of lenders to the Company, in form and substance reasonably satisfactory to the Parent, with respect to amounts (including any pre-payment penalties) owing by the Company as of the Closing; and (viii) such other instruments and documents as the Parent shall reasonably request not inconsistent with the provisions hereof.
Instrumentation The acceleration shall be recorded during the test, using equipment in accordance with channel frequency class 1000 as specified in the latest version of ISO 6487.
Technical Documentation Prior to commencement of the Tests on Completion, the Contractor shall supply to the Engineer the technical documentation as specified in the Employer’s Requirements. The Works or Section shall not be considered to be completed for the purposes of taking- over under sub-clause 10.1 [Taking Over of the Works and Sections] until the Engineer has received the technical documentation as defined in this sub-clause 5.7, the "history file" including design calculations and certain certification as well as any other documents required to meet the CE Marking requirements.
Closing Documentation, etc For purposes of determining compliance with the conditions set forth in §12, each Lender that has executed this Credit Agreement shall be deemed to have consented to, approved or accepted, or to be satisfied with, each document and matter either sent, or made available, by any Agent or any Co-Lead Arranger to such Lender for consent, approval, acceptance or satisfaction, or required thereunder to be consented to or approved by or acceptable or satisfactory to such Lender, unless an officer of the Administrative Agent active upon the Borrowers’ account shall have received notice from such Lender prior to the Closing Date specifying such Lender’s objection thereto and such objection shall not have been withdrawn by notice to the Administrative Agent to such effect on or prior to the Closing Date.
Other Documentation Administrative Agent shall have received all documents and instruments that Administrative Agent has then reasonably requested, in addition to those described in this Section 4.1. All such additional documents and instruments shall be reasonably satisfactory to Administrative Agent in form, substance and date.
ENVIRONMENTAL DOCUMENTATION Each environmental service provided by the Engineer shall have a deliverable. Deliverables shall summarize the methods used for the environmental services, and shall summarize the results achieved. The summary of results shall be sufficiently detailed to provide satisfactory basis for thorough review by the State, The Federal Highway Administration (FHWA), and (where applicable) agencies with regulatory oversight. All deliverables shall meet regulatory requirements for legal sufficiency, and shall adhere to the requirements for reports enumerated in the State’s NEPA MOU. a. Quality Assurance/Quality Control Review For each deliverable, the Engineer shall perform quality assurance quality control (QA/QC) reviews of environmental documents and on other supporting environmental documentation to determine whether documents conform with: 1) Current Environmental Compliance Toolkit guidance published by the State’s Environmental Affairs Division and in effect as of the date of receipt of the documents or documentation to be reviewed; 2) Current state and federal laws, regulations, policies, guidance, agreements, and memoranda of understanding between the State and other state or federal agencies; and 3) FHWA and American Association of State Highway and Transportation Officials (AASHTO) guidelines contained in “Improving the Quality of Environmental Documents, A Report of the Joint AASHTO and American Council of Engineering Companies (ACEC) Committee in Cooperation with the Federal Highway Administration” (May 2006) for: DocuSign Envelope ID: F9E4AA24-4672-4529-8EFA-00D1CA218520 a) Readability, and b) Use of evidence and data in documents to support conclusions. Upon request by the State, the Engineer shall provide documentation that the QA/QC reviews were performed by qualified staff. b. Deliverables shall contain all data acquired during the environmental service. All deliverables shall be written to be understood by the public and must be in accordance with the State’s Environmental Toolkit guidance, documentation standards, current guidelines, policies and procedures. c. Electronic versions of each deliverable must be written in software which is compatible to the State and must be provided in a changeable format for future use by the State. The Engineer shall supplement all hard copy deliverables with electronic copies in searchable Adobe Acrobat™ (.pdf) format, unless another format is specified. Each deliverable shall be a single, searchable .pdf file that mirrors the layout and appearance of the physical deliverable. The Engineer shall deliver the electronic files on CD-R, CD-RW media in Microsoft Windows format, or through the ftp site. d. When the environmental service is to apply for a permit (e.g., United States Coast Guard (USCG) or United States Army Corps of Engineers (USACE), the permit and all supporting documentation shall be the deliverable. e. Submission of Deliverables 1) Deliverables shall consist of reports of environmental services performed in addition to a Categorical Exclusion (CE) determination form and supporting documentation including the required form or Environmental Assessment (EA) document, when applicable. 2) All deliverables must comply with all applicable state and federal environmental laws, regulations and procedures and include all items listed in the Environmental Document Review Checklist and the Administrative Completeness Review Checklist. 3) On the cover page of each environmental assessment (EA), finding of no significant impact (XXXXX), environmental impact statement (EIS), and record of decision (ROD) prepared under the authority granted by this MOU, and for any memorandum corresponding to any CE determination it makes, the Engineer shall insert the following language in a way that is conspicuous to the reader or include it in a CE project record: "The environmental review, consultation, and other actions required by applicable DocuSign Envelope ID: F9E4AA24-4672-4529-8EFA-00D1CA218520 Federal environmental laws for this project are being, or have been, carried-out by TxDOT pursuant to 23 U.S.C. 327 and a Memorandum of Understanding dated December 16, 2014, and executed by FHWA and TxDOT." f. The State shall provide the State’s and other agency comments on draft deliverables to the Engineer. The Engineer shall revise the deliverable: 1) to include any State commitments, findings, agreements, or determinations (e.g., wetlands, endangered species consultation, Section 106, or Section 4(f)), required for the Transportation Activity as specified by the State; 2) to incorporate the results of public involvement and agency coordination; 3) to reflect mitigation measures resulting from comments received or changes in the Transportation Activity; and 4) include with the revised document a comment response form (matrix) in the format provided by the State. g. All photographs shall be 3.5” x 5” color presentation printed on matte finish photographic paper or 3.5” x 5” color presentation printed on matte white, premium or photo quality laser or inkjet paper. All photographs shall be well focused and clearly depict details relevant to an evaluation of the project area. Provision of photographs shall be one original print of each image or electronic presentations of comparable quality. Comparable quality electronic photograph presentations shall be at least 1200 x 1600 pixel resolution. Photographs shall be attached to separately labeled pages that clearly identify project name, project identification (ID) number, address or Universal Transverse Mercator (UTM) of resource, description of the picture and direction of the photographic view. In addition to the hard-copy prints, an electronic version of each will be submitted with the same identification information as the hard-copy.
