We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Common use of Drainage Clause in Contracts

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 PS No. 5292

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. DocuSign Envelope ID: 5174409E-E49B-4D11-8837-551F1909917A • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B5174409E-D32F-4D07E49B-4D11-94E48837-B8954C8506B4 PS No. 5292551F1909917A

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. Provide areas of wetlands delineation to be surveyed by the Engineer. Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. Furnish traffic signal justification warrants, if applicable. Available traffic counts, traffic projects and accident data, if available. Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. Provide a maximum project cost to be used in the preparation of the preliminary design. Furnish tabulation of current applicable bid process, if applicable. DocuSign Envelope ID: 981599F8-5D6E-41E6-ADFA-1DA0DC55F35E  Negotiate with each project utility company for relocation agreements or required relocation as applicable. Review, approve and update Project Design Criteria. Prompt Review of Deliverables. Provide copies of preferred District Details to be used. Provide copies of preferred District Standards to be used. Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. Review and provide written approval of each preliminary bridge layout before bridge design work begins. Shop drawings and related submittals received from the contractor or fabricators. Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. Provide design criteria for roadway, structures, drainage, and hydraulics. Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. Provide milestone guidelines as applicable to the district the work is being performed. Secure all required permits and agreements. DocuSign Envelope ID: 981599F8-5D6E-41E6-ADFA-1DA0DC55F35E  Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B981599F8-D32F-4D075D6E-41E6-94E4-B8954C8506B4 PS NoADFA-1DA0DC55F35E The Engineer shall provide engineering services required for the preparation of plans, specifications and estimates (PS&E) and related documents, for various projects in both rural and urban settings. 5292These services may include, but are not limited to, preparing roadway and bridge design, hydrologic and hydraulic design, traffic signal design, utility adjustment coordination, subsurface utility engineering, utility engineering, survey, and geotechnical data collection, and if requested, provide design support and testify at Right of Way hearings, and construction phase services necessary to support the design process.

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available Provide available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. DocuSign Envelope ID: F73B45F8-2E49-4FF9-B4C5-FBEDC0E23D7C Contract No. 18-7SDP5012 SA No. 1 PeopleSoft Contract No. 6855 • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap reportbridge inspection reports. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BF73B45F8-D32F-4D072E49-94E44FF9-B8954C8506B4 PS B4C5-FBEDC0E23D7C Contract No. 529218-7SDP5012 SA No. 1 PeopleSoft Contract No. 6855

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. DocuSign Envelope ID: 82ABE615-A8AB-4523-B50C-6FA5DBECD719 • Provide copies electronic files of preferred or all District Details specific design details to be usedused on the project. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Provide Bridge Condition survey of all existing structures within the project limits. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Assign NBI numbers to all project structures • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B82ABE615-D32F-4D07A8AB-4523-94E4-B8954C8506B4 PS No. 5292B50C-6FA5DBECD719

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. DocuSign Envelope ID: CB7B82B2-FA3B-4DDD-957A-C5AE0E5F436A • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. DocuSign Envelope ID: CB7B82B2-FA3B-4DDD-957A-C5AE0E5F436A • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BCB7B82B2-D32F-4D07FA3B-4DDD-957A-94E4-B8954C8506B4 PS NoC5AE0E5F436A The Engineer shall provide engineering services required for the preparation of plans, specifications and estimates (PS&E) and related documents, for various projects in both rural and urban settings. 5292These services may include, but are not limited to, preparing roadway and bridge design, hydrologic and hydraulic design, traffic signal design, utility adjustment coordination, subsurface utility engineering, utility engineering, survey, and geotechnical data collection, and if requested, provide design support and testify at Right of Way hearings, and construction phase services necessary to support the design process.

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. DocuSign Envelope ID: 679175E2-1976-4615-BA79-40AD36929E37 • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B679175E2-D32F-4D071976-94E44615-B8954C8506B4 PS NoBA79-40AD36929E37 The Engineer shall provide engineering services required for the preparation of plans, specifications and estimates (PS&E) and related documents, for various projects in both rural and urban settings. 5292These services may include, but are not limited to, preparing roadway and bridge design, hydrologic and hydraulic design, traffic signal design, survey, and geotechnical data collection, and if requested, provide design support and testify as the Engineer of Record at Right of Way hearings, and construction phase services necessary to support the design process.

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. DocuSign Envelope ID: 6EFD4AA6-1290-4298-9122-547DBF71FEF7 • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B6EFD4AA6-D32F-4D071290-94E44298-B8954C8506B4 PS No. 52929122-547DBF71FEF7

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7BE6A69BC8-D32F-4D071AF8-94E4478D-B8954C8506B4 A598-06F4CAE4CFA7 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 6IDP5332 DocuSign Envelope ID: B36C3E7BE6A69BC8-D32F-4D071AF8-94E4478D-B8954C8506B4 A598-06F4CAE4CFA7 PS No. 52925290

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area area, if available. • Provide areas of wetlands delineation to be surveyed by the Engineer, if identified. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Review and approve typical roadway cross sections created by the Engineer. • Provide pavement design to be used for cost estimation purposes. • Provide example estimates, district general notes and standards, sample WAs USED DocuSign Envelope ID: BB9CB9F4-FE9A-4C53-8095-241296FD342F specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid processprices, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Provide the Engineer with examples of acceptable format for the deliverables required by the work authorizations • Prepare final General Notes and final Specification Data SheetsSheets from rtf file provide by the Engineer. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 . Furnish as-built plans Processing of existing structuresall periodic payment requests submitted by Engineer. • Provide current average bid prices for construction, National Bridge Inventory (NBI)maintenance, and applicable Brinsap reportoperation costs. • Review and approve typical bridge cross sections created by the Engineer. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Name, address and phone number of the State’s project manager. • Processing of all periodic payment requests submitted by Engineer. • Assistance in the coordination and scheduling of site visits. • Review of recommendations offered by the Engineer and approve or reject any or all work performed under this contract. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. WAs USED DocuSign Envelope ID: BB9CB9F4-FE9A-4C53-8095-241296FD342F • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BBB9CB9F4-D32F-4D07FE9A-4C53-94E48095-B8954C8506B4 PS No. 5292241296FD342F

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. DocuSign Envelope ID: F9AD1D3C-C2EE-4E82-9C7E-21604456077D • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BF9AD1D3C-D32F-4D07C2EE-4E82-94E4-B8954C8506B4 PS No. 52929C7E-21604456077D

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. DocuSign Envelope ID: D0894D65-6FF6-4E21-BE5E-BEEA53479086 • Provide existing hydraulic and hydrologic studies associated with the project and project area area, if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Prepare final Estimate and Quantity Sheets for inclusion in the final plans. • Provide retaining wall architectural standard drawings to be incorporated into the design details, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Perform condition survey for each bridge class structure and provide approval from Bridge Division if the bridges are suitable for widening. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. DocuSign Envelope ID: D0894D65-6FF6-4E21-BE5E-BEEA53479086 • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide examples of acceptable format for the deliverables required by the work authorizations. • Provide current version of all State’s guidelines for preparation of environmental documents, air quality analysis, and noise analysis and versions of Guide recommended text” for Determining Time Requirements air, noise, or other studies for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 PS No. 5292which the State desires standard wording to be used.

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. DocuSign Envelope ID: 487DF4F5-443A-402D-88BD-EC5BD0BE2A0F • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B487DF4F5-D32F-4D07443A-402D-88BD-94E4-B8954C8506B4 PS No. 5292EC5BD0BE2A0F

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. Provide areas of wetlands delineation to be surveyed by the Engineer. Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. Furnish traffic signal justification warrants, if applicable. Available traffic counts, traffic projects and accident data, if available. Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. Provide a maximum project cost to be used in the preparation of the preliminary design. Furnish tabulation of current applicable bid process, if applicable. • Negotiate DocuSign Envelope ID: DADDA27D-207C-44D8-A3A7-49A72052A5A9 Contract Xx. 00-0XXX0000  Xxxxxxxxx with each project utility company for relocation agreements or required relocation as applicable. Review, approve and update Project Design Criteria. Prompt Review of Deliverables. Provide copies of preferred District Details to be used. Provide copies of preferred District Standards to be used. Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. Review and provide written approval of each preliminary bridge layout before bridge design work begins. Shop drawings and related submittals received from the contractor or fabricators. Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. Provide design criteria for roadway, structures, drainage, and hydraulics. Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. Provide milestone guidelines as applicable to the district the work is being performed. Secure all required permits and agreements. • Provide DocuSign Envelope ID: DADDA27D-207C-44D8-A3A7-49A72052A5A9 Contract Xx. 00-0XXX0000  Xxxxxxx the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BDADDA27D-207C-44D8-D32F-4D07A3A7-94E449A72052A5A9 Xxxxxxxx Xx. 00-B8954C8506B4 PS No. 52920XXX0000

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. Provide areas of wetlands delineation to be surveyed by the Engineer. Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. Furnish traffic signal justification warrants, if applicable. Available traffic counts, traffic projects and accident data, if available. Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. Provide a maximum project cost to be used in the preparation of the preliminary design. Furnish tabulation of current applicable bid process, if applicable. Negotiate with each project utility company for relocation agreements or required relocation as applicable. Review, approve and update Project Design Criteria. Prompt Review of Deliverables. Provide copies of preferred District Details to be used. Provide copies of preferred District Standards to be used. Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. Review and provide written approval of each preliminary bridge layout before bridge design work begins. Shop drawings and related submittals received from the contractor or fabricators. Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. Provide design criteria for roadway, structures, drainage, and hydraulics. Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. Provide milestone guidelines as applicable to the district the work is being performed. DocuSign Envelope ID: 6DA01770-719C-4EFF-A344-425189FAC6FB  Secure all required permits and agreements. Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No Provide examples of acceptable format for the deliverables required by the work authorizations. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 PS No. 5292 Provide current version of all State’s guidelines for preparation of environmental documents, air quality analysis, and noise analysis and versions of “recommended text” for air, noise, or other studies for which the State desires standard wording to be used.

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B7E35C160-D32F-4D077769-94E44E34-B8954C8506B4 87BF-0A3AF65FF97E • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 6IDP5266 DocuSign Envelope ID: B36C3E7B7E35C160-D32F-4D077769-94E44E34-B8954C8506B4 87BF-0A3AF65FF97E PS No. 52925280

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B923E8011-D32F-4D071E2D-416E-8D69-94E4-B8954C8506B4 5FFD494D36B6 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B923E8011-D32F-4D071E2D-416E-8D69-94E4-B8954C8506B4 PS No. 52925FFD494D36B6

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. Provide areas of wetlands delineation to be surveyed by the Engineer. Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. Furnish traffic signal justification warrants, if applicable. Available traffic counts, traffic projects and accident data, if available. Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. Provide a maximum project cost to be used in the preparation of the preliminary design. Furnish tabulation of current applicable bid process, if applicable. DocuSign Envelope ID: 8F4C5F80-CEA4-4B7A-AA13-EF50310E0F8C  Negotiate with each project utility company for relocation agreements or required relocation as applicable. Review, approve and update Project Design Criteria. Prompt Review of Deliverables. Provide copies of preferred District Details to be used. Provide copies of preferred District Standards to be used. Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. Review and provide written approval of each preliminary bridge layout before bridge design work begins. Shop drawings and related submittals received from the contractor or fabricators. Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. Provide design criteria for roadway, structures, drainage, and hydraulics. Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. Provide milestone guidelines as applicable to the district the work is being performed. Secure all required permits and agreements. DocuSign Envelope ID: 8F4C5F80-CEA4-4B7A-AA13-EF50310E0F8C  Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B8F4C5F80-D32F-4D07CEA4-94E44B7A-B8954C8506B4 PS AA13-EF50310E0F8C Contract No. 529224-8IDP5007 PSoft Contract No. 8066

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. DocuSign Envelope ID: FA09ABAD-94E6-4678-A208-A80E623CD52C • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BFA09ABAD-94E6-D32F-4D074678-94E4A208-B8954C8506B4 PS NoA80E623CD52C The Engineer shall provide engineering services required for the preparation of plans, specifications and estimates (PS&E) and related documents, for various projects in both rural and urban settings. 5292These services may include, but are not limited to, preparing roadway and bridge design, hydrologic and hydraulic design, traffic signal design, survey, and geotechnical data collection, and if requested, provide design support and testify at Right of Way hearings, and construction phase services necessary to support the design process.

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. DocuSign Envelope ID: E5C545DF-C1AD-42AC-935A-16774D35D2E6 Contract No. 18-7SDP5012 • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap BRINSAP report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway DocuSign Envelope ID: E5C545DF-C1AD-42AC-935A-16774D35D2E6 Contract No. 18-7SDP5012 closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BE5C545DF-D32F-4D07-94E4-B8954C8506B4 PS C1AD-42AC-935A-16774D35D2E6 Contract No. 529218-7SDP5012

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. DocuSign Envelope ID: EE409C2E-41D7-48B7-8169-C48996185D1B • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BEE409C2E-41D7-D32F-4D0748B7-94E48169-B8954C8506B4 PS No. 5292C48996185D1B

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B4EB23D04-D32F-4D070FA8-94E4470B-B8954C8506B4 A4D7-463E9090543B • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 6IDP5271 DocuSign Envelope ID: B36C3E7B4EB23D04-D32F-4D070FA8-94E4470B-B8954C8506B4 A4D7-463E9090543B PS No. 52925285

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7BE767BC6F-115E-4461-D32F-4D079416-94E4-B8954C8506B4 A68BBF4757F6 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 6IDP5274 DocuSign Envelope ID: B36C3E7BE767BC6F-115E-4461-D32F-4D079416-94E4-B8954C8506B4 A68BBF4757F6 PS No. 52925288

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7BF274686F-85C9-D32F-4D074CBD-94E4A478-B8954C8506B4 F69018DCE295 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BF274686F-85C9-D32F-4D074CBD-94E4A478-B8954C8506B4 PS No. 5292F69018DCE295

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. DocuSign Envelope ID: 00030A7D-3D10-434B-B077-86515E98EAAF • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7B00030A7D-3D10-D32F-4D07434B-94E4B077-B8954C8506B4 PS No86515E98EAAF The Engineer shall provide engineering services required for the preparation of plans, specifications and estimates (PS&E) and related documents, for a project along IH-10 from Fair Oaks Parkway to SH 46 in Bexar County and Xxxxxxx County Texas, San Antonio District. 5292This project is for the conversion of frontage roads from two-way to one-way, ramp reversals, turnarounds, intersection improvements, and other operational improvements as shown on the approved schematic. The services to be provided shall include, but are not limited to, preparing roadway and bridge design, hydrologic and hydraulic design, traffic signal design, survey, and geotechnical data collection, subsurface utility engineering (SUE), and if requested, provide design support and testify as the Engineer of Record at Right of Way hearings, and construction phase services necessary to support the design process.

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. Provide areas of wetlands delineation to be surveyed by the Engineer. Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. Furnish traffic signal justification warrants, if applicable. Available traffic counts, traffic projects and accident data, if available. Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. Provide a maximum project cost to be used in the preparation of the preliminary design. Furnish tabulation of current applicable bid process, if applicable. Negotiate with each project utility company for relocation agreements or required relocation as applicable. Review, approve and update Project Design Criteria. Prompt Review of Deliverables. Provide copies of preferred District Details to be used. Provide copies of preferred District Standards to be used. Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. DocuSign Envelope ID: FD24F92F-6139-4C7F-AA82-1622E42AE476  Review and provide written approval of each preliminary bridge layout before bridge design work begins. Shop drawings and related submittals received from the contractor or fabricators. Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. Provide design criteria for roadway, structures, drainage, and hydraulics. Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. Provide milestone guidelines as applicable to the district the work is being performed. Secure all required permits and agreements. Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BFD24F92F-6139-D32F-4D074C7F-94E4AA82-B8954C8506B4 PS No. 52921622E42AE476

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7B-D32F-4D07-94E4-B8954C8506B4 • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. DocuSign Envelope ID: F04D8EFA-7DC2-4EDC-AAF6-887BB1F875D0 • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BF04D8EFA-7DC2-D32F-4D074EDC-94E4AAF6-B8954C8506B4 PS No. 5292887BB1F875D0

Appears in 1 contract

Samples: Contract for Engineering Services

Drainage. Provide existing hydraulic and hydrologic studies associated with the project and project area if available. • Provide areas of wetlands delineation to be surveyed by the Engineer. • Provide data, if available, including “as-built plans”, existing cross sections, existing channel and drainage easement data. • Furnish traffic signal justification warrants, if applicable. • Available traffic counts, traffic projects and accident data, if available. • Provide example estimates, district general notes and standards, sample specification lists and related hard copy documentation for the Engineer's use in preparing the preliminary estimate, general notes and specifications. • Provide a maximum project cost to be used in the preparation of the preliminary design. • Furnish tabulation of current applicable bid process, if applicable. • Negotiate with each project utility company for relocation agreements or required relocation as applicable. • Review, approve and update Project Design Criteria. • Prompt Review of Deliverables. • Provide copies of preferred District Details to be used. • Provide copies of preferred District Standards to be used. • Prepare final General Notes and final Specification Data Sheets. DocuSign Envelope ID: B36C3E7BA17636F5-D32F-4D0701D8-94E44DFA-B8954C8506B4 AD46-30101F4B392A • Furnish as-built plans of existing structures, National Bridge Inventory (NBI), and applicable Brinsap report. • Review and provide written approval of each preliminary bridge layout before bridge design work begins. • Shop drawings and related submittals received from the contractor or fabricators. • Request for applicable change order plan modifications that are based on changed conditions or a request by the State to modify the design based on field conditions or applicable updates to the State’s standards and criteria. • Provide design criteria for roadway, structures, drainage, and hydraulics. • Interface with local, regional, State and Federal agencies or other entities on behalf of Engineer. • Coordinate and notify in writing with Emergency Medical Services (EMS), school system, United State (U.S.) Mail, etc. for any detour routes and roadway closures. Upon request by the State, the Engineer shall prepare the necessary exhibits. • Provide the Engineer with timely reviews in accordance with Exhibit C, “Work Schedule” of the Work Authorization and decisions to enable the Engineer to maintain the project schedule as approved by the State. • Provide paper prints or electronic copies of design files containing, for example, a sample title sheet, plan profile sheet, plan sheet, sheet quantities and storm water pollution prevention plan (SW3P) sheet, if available and applicable. • Provide milestone guidelines as applicable to the district the work is being performed. • Secure all required permits and agreements. • Provide the “Guide for Determining Time Requirements for Traffic Signal Preemptions at Highway-rail Crossings. Contract No. 36-6IDP5334 DocuSign Envelope ID: B36C3E7BA17636F5-D32F-4D0701D8-94E44DFA-B8954C8506B4 PS NoAD46-30101F4B392A The Engineer shall provide engineering services required for the preparation of plans, specifications and estimates (PS&E) and related documents, for various projects in both rural and urban settings. 5292These services may include, but are not limited to, preparing roadway and bridge design, hydrologic and hydraulic design, traffic signal design, survey, and geotechnical data collection, and if requested, provide design support and testify as the Engineer of Record at Right of Way hearings, and construction phase services necessary to support the design process.

Appears in 1 contract

Samples: Contract for Engineering Services