Entry on to the Module Sample Clauses

Entry on to the Module. 3.1 To enter the Module during regular business hours and with maximum possible notice to COLLABORATOR and on not less than 24 hours prior notice, but excluding any period in which such access would disrupt preparations for manufacturing or when COLLABORATOR Products are being manufactured In the Manufacturing Space for any purpose including to: 3.1.1 perform any action required under the QTA or to maintain GMP compliance within the Centre— however with respect to this Clause 3.1.1 only, no notice will be required (unless notice is required under the QTA, and providing the visits do not pose a material risk to the quality of Products being manufactured at the time or expose Catapult staff to safety risks)); 3.1.2 estimate the current value or rebuilding cost of the Centre for Insurance or any other purpose; 3.1.3 install, Inspect, clean, maintain, replace and to take readings from metering equipment, heat cost allocators and thermostatic radiator valves within or relating to the Module and to prepare an energy performance certificate; 3.1.4 do anything that Catapult is expressly entitled or required to do under this Agreement or the Lease or for any other reasonable purpose in connection with this Agreement Including to Inspect the state of repair and condition of the Module; 3.1.5 carry out any works to the Module to improve their environmental performance; 3.1.6 build on or into any boundary or party walls on or adjacent to the Module (but only to the extent this cannot be carried out without entry to the Module); 3.1.7 inspect, clean, maintain, repair, alter, decorate, rebuild or carry out works upon the Centre (but only to the extent this cannot be carried out without entry to the Module); 3.1.8 carry out any of the necessary Inputs (but only to the extent this cannot be carried out without entry to the Module); or 3.1.9 for any other reasonable management purpose (but only to the extent that the required action is agreed with COLLABORATOR first and that this action cannot be carried out without entry to the Module). 3.2 Where reasonably possible, Catapult, or its contractors, will undertake any works described in this paragraph 3 in a manner which causes the least disruption to the COLLABORATOR and its use of the Module as possible.
Sample 1Sample 2
AutoNDA by SimpleDocs
Entry on to the Module. 18.1 To enter the Module during regular business hours and on not less than 24 hours prior notice, but excluding any period in which COLLABORATOR Products are being manufactured in the Manufacturing Space (unless access is required in order for Catapult to fulfil any obligations under the QTA when no notice will be required) for any purpose including (without limitation) to: 18.1.1 estimate the current value or rebuilding cost of the Centre for insurance or any other purpose; 18.1.2 install, inspect, clean, maintain, replace and to take readings from metering equipment, heat cost allocators and thermostatic radiator valves within or relating to the Module and to prepare an energy performance certificate; and 18.1.3 do anything that Catapult is expressly entitled or required to do under this Agreement or the Lease or for any other reasonable purpose in connection with this Agreement including to inspect the state of repair and condition of the Module. 18.1.4 To enter the Module to carry out any works to the Module to improve their environmental performance. 18.1.5 If the relevant work cannot be reasonably carried out without entry onto the Module, to enter them to: 18.1.5.1 build on or into any boundary or party walls on or adjacent to the Module; 18.1.5.2 inspect, clean, maintain, repair, alter, decorate, rebuild or carry out works upon the Centre; 18.1.5.3 carry out any of the necessary inputs; or 18.1.5.4 for any other reasonable management purpose.
Sample 1
Entry on to the Module. 16.1 To enter the Module during regular business hours and on not less than 24 hours prior notice, but excluding any period in which ADAPTIMMUNE Products are being manufactured in the Manufacturing Space (unless notice is required under the QTA) for any purpose including (without limitation) to: 16.1.1 estimate the current value or rebuilding cost of the Centre for insurance or any other purpose; 16.1.2 install, inspect, clean, maintain, replace and to take readings from metering equipment, heat cost allocators and thermostatic radiator valves within or relating to the Module and to prepare an energy performance certificate; and 16.1.3 do anything that Catapult is expressly entitled or required to do under this Agreement or the Lease or for any other reasonable purpose in connection with this Agreement including to inspect the state of repair and condition of the Module. 16.2 To enter the Module to carry out any works to the Module to improve their environmental performance. 16.3 If the relevant work cannot be reasonably carried out without entry onto the Module, to enter them to: 16.3.1 build on or into any boundary or party walls on or adjacent to the Module; 16.3.2 inspect, clean, maintain, repair, alter, decorate, rebuild or carry out works upon the Centre; 16.3.3 carry out any of the necessary services; or 16.3.4 for any other reasonable management purpose.
Sample 1

Related to Entry on to the Module

  • Election to Purchase (To Be Executed Upon Exercise of Warrant)

  • OPTION TO ELECT REPAYMENT The undersigned hereby irrevocably request(s) and instruct(s) the Company to repay this Security (or portion hereof specified below) pursuant to its terms at a price equal to 100% of the principal amount hereof to be repaid, together with accrued and unpaid interest hereon, payable to the date of repayment, to the undersigned, at . (Please print or typewrite name and address of the undersigned) For this Security to be repaid, the undersigned must give to the Trustee at 000 Xxxx Xxxxxx - Xxxxx 0000, Xxx Xxxx, XX 00000, Attn: Corporate Trust Administration, or at such other place or places of which the Company shall from time to time notify the Holders of the Securities, not more than 60 days nor less than 30 days prior to the date of repayment, this Security with this "Option to Elect Repayment" form duly completed. If less than the entire principal amount of this Security is to be repaid, specify the portion hereof (which shall be increments of US$1,000) which the holder elects to have repaid and specify the denomination or denominations (which shall be an Authorized Denomination) of the Securities to be issued to the holder for the portion of this Security not being repaid (in the absence of any such specification, one such Security will be issued for the portion not being repaid): US$ Signature Dated: NOTICE: The signature on this "Option to Elect Repayment" form must correspond with the name as written upon the face of the within Security in every particular, without alteration or enlargement or any change whatsoever. NOTICE: The signature(s) should be guaranteed by an eligible guarantor institution (banks, stockbrokers, savings and loan associations, and credit unions with membership in an approved signature guarantee medallion program), pursuant to Rule 17Ad-15 under the Securities Exchange Act of 1934. The following abbreviations, when used in the inscription on the face of the within Security, shall be construed as though they were written out in full according to applicable laws or regulations. TEN COM - as tenants in common TEN ENT - as tenants by the entireties JT TEN - as joint tenants with right of survivorship and not as tenants in common UNIF GIFT MIN ACT- Custodian (Cust) (Minor) FOR VALUE RECEIVED, the undersigned hereby sell(s), assign(s) and transfer(a) unto: PLEASE INSERT SOCIAL SECURITY NUMBER OR OTHER IDENTIFYING NUMBER OF ASSIGNEE the within Security and all rights thereunder, and hereby irrevocably constitutes and appoints to transfer said Security on the books of the Company, with full power of substitution in the premises. Dated:

  • Fee on Termination of Offering Notwithstanding anything contained herein to the contrary, upon termination of the Offering the Company shall: (A) reimburse the Representative for, or otherwise pay and bear, the expenses and fees to be paid and borne by the Company as provided for in Section 3.12.1 above, as applicable, and (B) reimburse the Representative for the full amount of its accountable out-of-pocket expenses actually incurred to such date (which shall include, but shall not be limited to, all fees and disbursements of the Representative’s counsel, travel, lodging and other “road show” expenses, mailing, printing and reproduction expenses, and any expenses incurred by the Representative in conducting its due diligence, including background checks of the Company’s officers and directors), up to an aggregate amount of $50,000, less the amounts previously paid and any amounts previously paid to the Representative in reimbursement for such expenses. If applicable, and solely in the event of a termination of this Offering, the Representative shall refund to the Company any portion of the Advance previously received by the Representative which is in excess of the accountable out-of-pocket expenses actually incurred to such date by the Representative.

  • Agreement to Purchase The Mortgage Loan Seller agrees to sell, assign, transfer, set over and otherwise convey to the Purchaser, without recourse, representation or warranty, other than as set forth herein, and the Purchaser agrees to purchase from the Mortgage Loan Seller, subject to the terms and conditions set forth herein, the Mortgage Loans. The purchase and sale of the Mortgage Loans shall take place on August 22, 2017 or such other date as shall be mutually acceptable to the parties hereto (the “Closing Date”). As of the Cut-off Date, the Mortgage Loans will have an aggregate principal balance, after application of all payments of principal due on the Mortgage Loans, if any, on or before such date, whether or not received, of $301,354,734, subject to a variance of plus or minus 5%. The purchase price for the Mortgage Loans shall be an amount set forth on the cross receipt between the Mortgage Loan Seller and the Purchaser dated the Closing Date (which price reflects no deduction for any transaction expenses for which the Mortgage Loan Seller is responsible). The Purchaser shall pay such purchase price to the Mortgage Loan Seller on the Closing Date by wire transfer in immediately available funds or by such other method as shall be mutually acceptable to the parties hereto.

  • CDSCs Related to the Redemption of Non-Omnibus Commission Shares CDSCs in respect of the redemption of Non-Omnibus Commission Shares shall be allocated to the Distributor or a Successor Distributor depending upon whether the related redeemed Commission Share is attributable to the Distributor or such Successor Distributor, as the case may be, in accordance with Part I above.

  • Right to Purchase Section 11.23

  • Conditions to The Buyer’s Obligation to Purchase The obligation of the Buyer hereunder to purchase the Note at the Closing is subject to the satisfaction, at or before the Closing Date of each of the following conditions, provided that these conditions are for the Buyer’s sole benefit and may be waived by the Buyer at any time in its sole discretion: a. The Company shall have executed this Agreement and delivered the same to the Buyer. b. The Company shall have delivered to the Buyer the duly executed Note (in such denominations as the Buyer shall request) in accordance with Section 1(b) above. c. The Irrevocable Transfer Agent Instructions, in form and substance satisfactory to a majority-in-interest of the Buyer, shall have been delivered to and acknowledged in writing by the Company’s Transfer Agent. d. The representations and warranties of the Company shall be true and correct in all material respects as of the date when made and as of the Closing Date as though made at such time (except for representations and warranties that speak as of a specific date) and the Company shall have performed, satisfied and complied in all material respects with the covenants, agreements and conditions required by this Agreement to be performed, satisfied or complied with by the Company at or prior to the Closing Date. The Buyer shall have received a certificate or certificates, executed by the chief executive officer of the Company, dated as of the Closing Date, to the foregoing effect and as to such other matters as may be reasonably requested by the Buyer including, but not limited to certificates with respect to the Company’s Certificate of Incorporation, By-laws and Board of Directors’ resolutions relating to the transactions contemplated hereby. e. No litigation, statute, rule, regulation, executive order, decree, ruling or injunction shall have been enacted, entered, promulgated or endorsed by or in any court or governmental authority of competent jurisdiction or any self-regulatory organization having authority over the matters contemplated hereby which prohibits the consummation of any of the transactions contemplated by this Agreement. f. No event shall have occurred which could reasonably be expected to have a Material Adverse Effect on the Company including but not limited to a change in the 1934 Act reporting status of the Company or the failure of the Company to be timely in its 1934 Act reporting obligations. g. The Conversion Shares shall have been authorized for quotation on the OTCBB and trading in the Common Stock on the OTCBB shall not have been suspended by the SEC or the OTCBB. h. The Buyer shall have received an officer’s certificate described in Section 3(c) above, dated as of the Closing Date.

  • CONDITIONS TO EACH BUYER’S OBLIGATION TO PURCHASE The obligation of each Buyer hereunder to purchase the Notes and Warrants at the Closing is subject to the satisfaction, at or before the Closing Date of each of the following conditions, provided that these conditions are for such Buyer’s sole benefit and may be waived by such Buyer at any time in its sole discretion: a. The Company shall have executed this Agreement and the Registration Rights Agreement, and delivered the same to the Buyer. b. The Company shall have delivered to such Buyer duly executed Notes (in such denominations as the Buyer shall request) and Warrants in accordance with Section 1(b) above. c. The Irrevocable Transfer Agent Instructions, in form and substance satisfactory to a majority-in-interest of the Buyers, shall have been delivered to and acknowledged in writing by the Company’s Transfer Agent. d. The representations and warranties of the Company shall be true and correct in all material respects as of the date when made and as of the Closing Date as though made at such time (except for representations and warranties that speak as of a specific date) and the Company shall have performed, satisfied and complied in all material respects with the covenants, agreements and conditions required by this Agreement to be performed, satisfied or complied with by the Company at or prior to the Closing Date. The Buyer shall have received a certificate or certificates, executed by the chief executive officer of the Company, dated as of the Closing Date, to the foregoing effect and as to such other matters as may be reasonably requested by such Buyer including, but not limited to certificates with respect to the Company’s Certificate of Incorporation, By-laws and Board of Directors’ resolutions relating to the transactions contemplated hereby. e. No litigation, statute, rule, regulation, executive order, decree, ruling or injunction shall have been enacted, entered, promulgated or endorsed by or in any court or governmental authority of competent jurisdiction or any self-regulatory organization having authority over the matters contemplated hereby which prohibits the consummation of any of the transactions contemplated by this Agreement. f. No event shall have occurred which could reasonably be expected to have a Material Adverse Effect on the Company. g. The Conversion Shares and Warrant Shares shall have been authorized for quotation on the OTCBB and trading in the Common Stock on the OTCBB shall not have been suspended by the SEC or the OTCBB. h. The Buyer shall have received an opinion of the Company’s counsel, dated as of the Closing Date, in form, scope and substance reasonably satisfactory to the Buyer and in substantially the same form as Exhibit “D” attached hereto. i. The Buyer shall have received an officer’s certificate described in Section 3(c) above, dated as of the Closing Date.

  • Restriction on Transfer This Warrant and the rights granted to the holder hereof are transferable, in whole or in part, upon surrender of this Warrant, together with a properly executed assignment in the form attached hereto, at the office or agency of the Company referred to in Paragraph 7(e) below, provided, however, that any transfer or assignment shall be subject to the conditions set forth in Paragraph 7(f) hereof and to the applicable provisions of the Securities Purchase Agreement. Until due presentment for registration of transfer on the books of the Company, the Company may treat the registered holder hereof as the owner and holder hereof for all purposes, and the Company shall not be affected by any notice to the contrary. Notwithstanding anything to the contrary contained herein, the registration rights described in Paragraph 8 are assignable only in accordance with the provisions of that certain Registration Rights Agreement of even date herewith by and among the Company and the other signatories thereto (the "Registration Rights Agreement").

  • Option Nontransferable Optionee may not transfer or assign all or any part of the Option other than by will or by the laws of descent and distribution. This Option may be exercised, during the lifetime of Optionee, only by Optionee, or in the event of Optionee’s legal incapacity, by Optionee’s guardian or legal representative acting on behalf of Optionee in a fiduciary capacity under state law and court supervision.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!