MANAGEMENT FUNCTIONS B.1 The Association recognizes that the management of the Hospital and the direction of working forces are fixed exclusively in the Hospital and shall remain solely with the Hospital except as specifically limited by the provisions of this Agreement and, without restricting the generality of the foregoing, the Association acknowledges that it is the exclusive function of the Hospital to: (a) maintain order, discipline and efficiency; (b) hire, assign, retire, discharge, direct, promote, demote, classify, transfer, lay- off, recall, and suspend or otherwise discipline nurses, provided that a claim of discharge or discipline without just cause may be the subject of a grievance and dealt with as hereinafter provided; (c) determine, in the interest of efficient operation and high standards of service, job rating and classification, the hours of work, work assignments, methods of doing the work, and the working establishment for the service; (d) generally to manage the operation that the Hospital is engaged in and, without restricting the generality of the foregoing, to determine the number of personnel required, methods, procedures, and equipment in connection therewith; (e) make, enforce, and alter from time to time reasonable rules and regulations to be observed by the nurses which are not inconsistent with the provisions of this Agreement. B.2 These rights shall not be exercised in a manner inconsistent with the provisions of this Agreement.
Meeting and Function Rooms to be Provided A. The Contractor shall provide to the Judicial Council the meeting and function rooms on the Dates and at the times set forth in Table 1, below, including necessary and appropriate set up. Prior to the Program, the Judicial Council will provide one (1) or more BEO’s to the Contractor setting forth the final detail on these items. Date1 2:00pm – 24 hours Meeting Planning Office Boardroom 2 2:00pm – 24 hours Staff Office 1 rounds of 5, 4 6’ tables 5 2:00pm – 24 hours AV Storage 1 6’ table with 2 chairs 2 Date2 24 hours Meeting Planning Office Boardroom 2 24 hours Staff Office 1 rounds of 5, 4 6’ tables 5 24 hours AV Storage 1 6’ table with 2 chairs 2 6:00am – 24 hours Faculty Room Conference 6 6:00am – 24 hours Registration 2 6’ table with 2 chairs Flow 5:00am - 24 hours General Session Crescent Rounds of 5 92 6:00am – 24 hours Breakout #1 Crescent Rounds of 5 23 Date Time Function Location Set Up Expected Attendance 6:00am – 24 hours Breakout #2 Crescent Rounds of 5 23 6:00am – 24 hours Breakout #3 Crescent Rounds of 5 23 6:00am – 24 hours Breakout #4 Crescent Rounds of 5 23 Date3 24 hours Meeting Planning Office Boardroom 2 24 hours Staff Office 1 rounds of 5, 4 6’ tables 5 24 hours AV Storage 1 6’ table with 2 chairs 2 24 hours Faculty Room Conference 6 24 hours Registration / materials table 2 6’ table with 2 chairs Flow 24 hours General Session Crescent Rounds of 5 92 24 hours Breakout #1 Crescent Rounds of 5 23 24 hours Breakout #2 Crescent Rounds of 5 23 24 hours Breakout #3 Crescent Rounds of 5 23 24 hours Breakout #4 Crescent Rounds of 5 23 24 hours Breakfast/ Lunch room with speaker Rounds of 9-10 118 Date4 24 hours- 4:00pm Office 1 rounds of 5, 4 6’ tables 5 24 hours AV Storage 1 6’ table with 2 chairs 2 24 hours- 12:00pm Faculty Room Conference 6 24 hours- 1:00pm Registration / materials table 2 6’ table with 2 chairs Flow 5:00am - 24 hours General Session Crescent Rounds of 5 92 6:00am – 24 hours Breakout #1 Crescent Rounds of 5 23 24 hours- 6:00pm Breakout #2 Crescent Rounds of 5 23 24 hours- 6:00pm Breakout #3 Crescent Rounds of 5 23 24 hours - 6:00pm Breakout #4 Crescent Rounds of 5 23 24 hours- 10:00amm Breakfast room Rounds of 9-10 118 Date5 24 hours- 10:00am AV Storage 1 6’ table with 2 chairs 2 B. Upon reasonable Notice to the Contractor, the Judicial Council may change the Program function, meeting times, room configurations, number of meeting and function rooms, and the numbers of Attendees attending these functions and meetings. C. The Contractor shall assure that the meeting and function rooms are maintained between sixty-eight degrees (68°) and seventy-four degrees (74°) Fahrenheit during all meeting and function sessions of the Program.
Additional Functions Upon receipt of Proper Instructions, the Custodian shall take all such other actions as specified in such Proper Instructions and as shall be reasonable or necessary with respect to Repurchase Agreement transactions and the Securities and funds transferred and received pursuant to such transactions, including, without limitation, all such actions as shall be prescribed in the event of a default under a Repurchase Agreement.
Proposed Policies and Procedures Regarding New Online Content and Functionality By October 31, 2017, the School will submit to OCR for its review and approval proposed policies and procedures (“the Plan for New Content”) to ensure that all new, newly-added, or modified online content and functionality will be accessible to people with disabilities as measured by conformance to the Benchmarks for Measuring Accessibility set forth above, except where doing so would impose a fundamental alteration or undue burden. a) When fundamental alteration or undue burden defenses apply, the Plan for New Content will require the School to provide equally effective alternative access. The Plan for New Content will require the School, in providing equally effective alternate access, to take any actions that do not result in a fundamental alteration or undue financial and administrative burdens, but nevertheless ensure that, to the maximum extent possible, individuals with disabilities receive the same benefits or services as their nondisabled peers. To provide equally effective alternate access, alternates are not required to produce the identical result or level of achievement for persons with and without disabilities, but must afford persons with disabilities equal opportunity to obtain the same result, to gain the same benefit, or to reach the same level of achievement, in the most integrated setting appropriate to the person’s needs. b) The Plan for New Content must include sufficient quality assurance procedures, backed by adequate personnel and financial resources, for full implementation. This provision also applies to the School’s online content and functionality developed by, maintained by, or offered through a third-party vendor or by using open sources. c) Within thirty (30) days of receiving OCR’s approval of the Plan for New Content, the School will officially adopt, and fully implement the amended policies and procedures.
Connecting Transmission Owner’s Scope of Work and Responsibilities The Connecting Transmission Owner will design, construct, own, operate and maintain all Connecting Transmission Owner’s Interconnection Facilities, except as otherwise stated above and in the Project Specific Specifications. The Connecting Transmission Owner will complete all engineering reviews, field verifications and witness testing, etc. in accordance with the ESBs and the Project Specific Specifications. Connecting Transmission Owner shall provide the revenue metering CT/PT units and meter socket enclosure. The Connecting Transmission Owner shall: • provide, run, and wire both ends of the color-coded cable for the revenue metering instrument transformer secondary wiring; • perform all terminations; and • supply and install the meter. The revenue meter may require a communications link to the RTU. The Connecting Transmission Owner will specify and run those communications cables. The Connecting Transmission Owner shall complete all wiring, testing and commissioning of the RTU.
Commercially Useful Function A prime consultant can credit expenditures to a DBE subconsultant toward DBE goals only if the DBE performs a Commercially Useful Function (CUF). A DBE performs a CUF when it is responsible for execution of the work of a contract and carries out its responsibilities by actually performing, managing, and supervising the work involved. To perform a commercially useful function, the DBE must also be responsible, with respect to materials and supplies on the contract, for negotiating price, determining quality and quantity, ordering the material, and installing (where applicable) and paying for the material itself that it uses on the project. To determine whether a DBE is performing a commercially useful function, the Department will evaluate the amount of work subcontracted, industry practices, whether the amount the firm is to be paid under the contract is commensurate with the work it is actually performing and the DBE credit claimed for its performance of the work, and other relevant factors. A DBE will not be considered to perform a commercially useful function if its role is limited to that of an extra participant in a transaction, contract, or project through which funds are passed in order to obtain the appearance of DBE participation. In determining whether a DBE is such an extra participant, the Department will examine similar transactions, particularly those in which DBEs do not participate. If a DBE does not perform or exercise responsibility for at least 30 percent of the total cost of its contract with its own work force, or if the DBE subcontracts a greater portion of the work of a contract than would be expected on the basis of normal industry practice for the type of work involved, the Department will presume that the DBE is not performing a commercially useful function. When a DBE is presumed not to be performing a commercially useful function as provided above, the DBE may present evidence to rebut this presumption. The Department will determine if the firm is performing a CUF given the type of work involved and normal industry practices. The Department will notify the consultant, in writing, if it determines that the consultant’s DBE subconsultant is not performing a CUF. The consultant will be notified within seven calendar days of the Department’s decision. Decisions on CUF may be appealed to the ADOT State Engineer. The appeal must be in writing and personally delivered or sent by certified mail, return receipt requested, to the State Engineer. The appeal must be received by the State Engineer no later than seven calendar days after the decision of XXXX. XXXX’s decision remains in place unless and until the State Engineer reverses or modifies BECO’s decision. ADOT State Engineer will promptly consider any appeals under this subsection and notify the consultant of ADOT’s State Engineer findings and decisions. Decisions on CUF matters are not administratively appealable to USDOT. The BECO may conduct project site visits on the contract to confirm that DBEs are performing a CUF. The consultant shall cooperate during the site visits and the BECO’s staff will make every effort not to disrupt work on the project.
DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK
Operations Support Systems Functions 9.1 Effective as of February 8, 2021, notwithstanding any other term or condition of the Amended Agreement or a Verizon tariff or SGAT, and subject to the transitional provisions set forth in Subsection 9.2 below, unbundled access to Operations Support Systems Functions will not be available from Verizon on or after February 8, 2021, except when such functions are used to manage other UNEs that remain available from Verizon, local interconnection, or local number portability. 9.2 Any unbundled access to Operations Support System Functions eliminated pursuant to Section 9.1 above will continue to be provisioned for the period in which unbundled access is available to the UNE managed through the use of such functions, but not after such period.
MIXED FUNCTIONS An employee engaged for more than two hours during one day or shift on duties carrying a higher rate than his or her ordinary classification shall be paid the higher rate for such day or shift. If for two hours or less during one day or shift he or she shall be paid the higher rate for the time so worked.
Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.
