Export Licensing and Security. Fully comply with Producer's reasonable instructions concerning export licensing and security from time to time for products.
Export Licensing and Security Sample Clauses
Related to Export Licensing and Security
Import Licensing 1. Each Party shall ensure that all automatic and non- automatic import licensing measures are implemented in a transparent and predictable manner, and applied in accordance with the Agreement on Import Licensing Procedures in Annex 1A to the WTO Agreement. 2. Each Party shall promptly notify the other Parties of existing import licensing procedures. Thereafter, each Party shall notify the other Parties of any new import licensing procedures and any modification to its existing import licensing procedures, to the extent possible 60 days before it takes effect, but in any case no later than within 60 days of publication. The information in any notification under this Article shall be in accordance with Article 5.2 and 5.3 of the Agreement on Import Licensing Procedures in Annex 1A to the WTO Agreement. 3. Upon request of another Party, a Party shall, promptly and to the extent possible, respond to the request of that Party for information on import licensing requirements of general application.
Safety and Security Contractor is responsible for maintaining safety in the performance of this Agreement. Contractor shall be responsible to ascertain from the District the rules and regulations pertaining to safety, security, and driving on school grounds, particularly when children are present.
Data Protection and Security A. In this Agreement the following terms shall have the meanings respectively ascribed to them:
Privacy and Security (a) Each of the Company and its Subsidiaries complies (and requires and monitors the compliance of applicable third parties) in all material respects with all applicable Laws relating to privacy or data security, and reputable industry practice, standards, self-governing rules and policies and their own published, posted and internal agreements and policies (which are in conformance with reputable industry practice) (all of the foregoing collectively, “Privacy Laws”) with respect to: (i) personally identifiable information (including name, address, telephone number, electronic mail address, social security number, bank account number or credit card number), sensitive personal information and any special categories of personal information regulated thereunder or covered thereby (“Personal Information”), whether any of same is accessed or used by the Company or any of its Subsidiaries or any of their respective business partners; and (ii) non-personally identifiable information, whether any of same is accessed or used by the Company or any of its Subsidiaries or any of their respective business partners. (b) Neither the Company nor any of its Subsidiaries uses, collects, or receives any Personal Information or sensitive non-personally identifiable information and does not become aware of the identity or location of, or identify or locate, any particular Person as a result of any receipt of such Personal Information, in a manner which would materially breach or violate any Privacy Laws and materially and adversely impact the business of the Company and its Subsidiaries, taken as a whole. (c) To the Company’s knowledge, Persons with which the Company or any of its Subsidiaries have contractual relationships have not breached any agreements or any Privacy Laws pertaining to Personal Information and to non-personally identifiable information. (d) To the Company’s knowledge, the Company and its Subsidiaries take all commercially reasonable steps to protect the operation, confidentiality, integrity and security of their respective business systems and websites and all information and transactions stored or contained therein or transmitted thereby against any unauthorized or improper use, access, transmittal, interruption, modification or corruption, and there have been no material breaches of same. Without limiting the generality of the foregoing, each of the Company and its Subsidiaries (i) uses industry standard encryption technology and (ii) has implemented a comprehensive security plan that (1) identifies internal and external risks to the security of the Company’s or its Subsidiaries’ confidential information and Personal Information and (2) implements, monitors and improves adequate and effective safeguards to control those risks.
Procurement of Goods and Services (a) If the HSP is subject to the procurement provisions of the BPSAA, the HSP will abide by all directives and guidelines issued by the Management Board of Cabinet that are applicable to the HSP pursuant to the BPSAA. (b) If the HSP is not subject to the procurement provisions of the BPSAA, the HSP will have a procurement policy in place that requires the acquisition of supplies, equipment or services valued at over $25,000 through a competitive process that ensures the best value for funds expended. If the HSP acquires supplies, equipment or services with the Funding it will do so through a process that is consistent with this policy.
Sublicense to Use the Scudder Trademarks As exclusive licensee of the rights to use anx xxxxxcense the use of the "Scudder," "Scudder Investments" and "Scudder, Stevens & Clark, Inx." xxxdemaxxx (xxgether, the "Scuddex Xxxxx"), xxx xerexx xxant the Trust a nonexclusive right xxx xxxlicense to use (i) the "Scudder" name and mark as part of the Trust's name (the "Fund Namx"), xxd (ii) the Scudder Marks in connection with the Trust's investment products xxx xxxvices, in each case only for so long as this Agreement, any other investment management agreement between you or any organization which shall have succeeded to your business as investment manager ("your Successor") and the Trust, or any extension, renewal or amendment hereof or thereof remains in effect, and only for so long as you are a licensee of the Scudder Marks, provided however, that you agree to use your best xxxxxxx to maintain your license to use and sublicense the Scudder Marks. The Trust agrees that it shall have no right to suxxxxxxxe or assign rights to use the Scudder Marks, shall acquire no interest in the Scudder Marks othxx xxxx the rights granted herein, that all of txx Xxxxt's uses of the Scudder Marks shall inure to the benefit of Scudder Trust Company xx xxxer and licensor of the Scudder Marks (xxx "Xrademark Owner"), and that the Trust shall nxx xxxxlenge the validity of the Scudder Marks or the Trademark Owner's ownership thereof. The Truxx xxxxher agrees that all services and products it offers in connection with the Scudder Marks shall meet commercially reasonable standards of duaxxxx, xs may be determined by you or the Trademark Owner from time to time, provided that you acknowledge that the services and products the Trust rendered during the one-year period preceding the date of this Agreement are acceptable. At your reasonable request, the Trust shall cooperate with you and the Trademark Owner and shall execute and deliver any and all documents necessary to maintain and protect (including but not limited to in connection with any trademark infringement action) the Scudder Marks and/or enter the Trust as a registered user thereof. Xx xxch time as this Agreement or any other investment management agreement shall no longer be in effect between you (or your Successor) and the Trust, or you no longer are a licensee of the Scudder Marks, the Trust shall (to the extent that, and as soon ax, xx xawfully can) cease to use the Fund Name or any other name indicating that it is advised by, managed by or otherwise connected with you (or your Successor) or the Trademark Owner. In no event shall the Trust use the Scudder Marks or any other name or mark confusingly similar therexx (xxxluding, but not limited to, any name or mark that includes the name "Scudder") if this Agreement or any other investment advisory agrexxxxx xetween you (or your Successor) and the Fund is terminated.
Health, Safety and Security 14.1 The Employer recognizes a responsibility to provide an environment intended to protect the health, safety and security of Members as they carry out their responsibilities. To that end, the Employer agrees: (a) to maintain a Joint Health and Safety Committee (the JHSC) with broad representation drawn from all sectors of the University, including at least one (1) person appointed by the Association; (b) to cooperate with the Association in making every reasonable provision for the safety, health and security of Members; (c) to take reasonable measures to maintain the security of the buildings and grounds while at the same time maintaining reasonable access for Members who have a need for such access at times other than during regular working hours; (d) to ensure that the Association has the right to appoint at least one (1) person to any representative committee whose terms of reference specifically include the health, safety or security of Members as they carry out their responsibilities; (e) to comply with the Occupational Health and Safety Act, R.S.O. 1990, and relevant regulations thereto, as amended from time to time (the “Act”); (f) that Members may refuse unsafe work pursuant to and in accordance with the relevant provisions of the Act for so doing; (g) that Members report any known or potential dangers to their Xxxx; (h) In addition, the Employer agrees: i) to provide Members with health and safety training, personal protective equipment, and access to health and safety programs, policies and procedures; ii) to provide resources for the JHSC; iii) to compensate a CASBU Member who is eligible to be, and serves as, the person appointed by the Association to the JHSC when that service is outside the period of the Member’s contract; iv) to provide training for the person appointed by the Association to the JHSC directly related to their duties and responsibilities in connection with the JHSC; v) to recognize a JHSC Member’s right to be present during workplace safety testing and audits and receive written copies of any reports and recommendations from the testing/audits and a copy of a draft report if one is provided to the Employer; vi) to recognize a JHSC Member’s right to have advance notice when advance notice is given by the Ministry of Labour of any Ministry of Labour inspection and to accompany a Ministry of Labour Inspector during an inspection and receive a copy of any report produced by the inspector. 14.2 The parties agree that all personal communications must adhere to the Personal Harassment and Discrimination Policy and the Nipissing University Acceptable Use Policy. Effective June 10, 2006, universities are subject to the Freedom of Information and Protection of Privacy Act (FIPPA). All records in the custody and control of the University will be subject to FIPPA with exceptions as defined by the Act. Persons may request and have a right to access University information or records. A record is defined under the Act as any record of information however recorded, whether in printed or electronic form, film, or otherwise and includes drafts, post-it notes, margin notes, hard drive files, emails, voice mails, electronic agendas, address books, and recording devices. 14.3 Unless required under FIPPA, and for the purposes of this Article, files are documents under a Member’s control and stored on University property, either in paper or electronic form. Such files do not include the Member’s official file in the Xxxx’x office nor the Personnel File of the Member in the Human Resources office. 14.4 On termination of a Member’s employment for any reason other than cause, the Employer will permit, by appointment only, accompanied access for a period of fifteen (15) working days (or longer with the agreement of the Xxxx) by the former Member or the Member’s executors to the Member’s files, whether in paper or electronic format. The purpose of the allowed access is for transferring required documents to other faculty, the Chair, or the Xxxx. Where files are not required to support continued student academic needs or ongoing operational requirements, the former Member or designate may remove or destroy their personal files. Items that are clearly of a personal nature or are owned by the former Member such as furniture, pictures, books, etc., may be removed at this time.
Export/Import 14.1 The Works (including, without limitation, any Software) may be subject to the export or import laws and regulations of: 14.1.1 the United States, including without limitation the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Parts 120-130), the U.S. Export Administration Regulations (15 C.F.R. Parts 730-774), and the economic and trade sanctions administered by the U.S. Department of Treasury Office of Foreign Assets Control; 14.1.2 the European Union and its member states, including without limitation Council Regulation (EC) No. 1334/2000; and 14.1.3 other countries (collectively, “Export/Import Law”). Buyer agrees to comply strictly with all Export/Import Laws applicable to the Works. Buyer shall promptly notify Supplier of any authorisation requirements under Export/Import Laws that may apply to delivery of the Works to Buyer site(s). Buyer acknowledges and agrees that the Works shall not be exported, re-exported, trans-shipped or otherwise transferred to Cuba, Iran, North Korea, Syria, Sudan, or any other countries for which the United States and/or the European Union maintains an embargo (collectively, "Embargoed Countries"), or a national or resident thereof, or to any person or entity on the U.S. Department of Treasury List of Specially Designated Nationals, the U.S. Department of Commerce Denied Parties or Entity List, or to any person on any comparable list maintained by the European Union or its member states (collectively, "Denied or Restricted Parties"). The lists of Embargoed Countries and Denied or Restricted Parties are subject to change without notice. Buyer represents and warrants that neither it nor any of their customers or their users is located in, a national or resident of, or under the control of an Embargoed Country or similarly Denied or Restricted Party. Buyer specifically shall obtain all required authorizations from the U.S. (or EU as applicable) Government before transferring or otherwise disclosing technical data or technology (as those terms are defined in 22 C.F.R. § 120.10 and 15 C.F.R. § 722, respectively), to any Foreign Person (as defined in 22 C.F.R. § 120.16). 14.2 Registration In accordance with 22 C.F.R. Part 122, any person who engages in the United States in the business of either manufacturing or exporting defense articles or furnishing defense services is required to register with the U.S. State Department’s Directorate of Defense Trade controls. Engaging in the business of manufacturing or exporting defense articles or furnishing defense services requires only one occasion of manufacturing or exporting a defense article or furnishing defense services. Manufacturers who do not engage in exporting must nevertheless register. 14.3 Acceptance of these terms and conditions certifies to the Supplier that the Buyer is in compliance with 22 C.F.R. Part 120 as required and the Buyer’s registration will remain valid during the terms of this agreement. 14.4 Further to acceptance, the Buyer further certifies it: 14.4.1 Understands its obligation to protect EAR or ITAR controlled Goods and Services as data as necessary from unauthorized disclosure or access to foreign person employees or visitors. 14.4.2 In the performance of the contract, the Buyer understands its obligation to determine whether it will require the use of third party subcontractors to access any technical data, Goods and Services. If required, the Buyer is responsible for identifying and licensing any activity that requires export authorization from the Department of Commerce, Bureau of Industry and Security or the Department of State, Directorate of Defense Trade Controls. 14.5 The Goods shall not be resold or exported to countries specified in the Country Guidance Chart which can be found at xxxx://xxx.xxxxxx.xxx/about-cobham/aerospace-and-security/about- us/useful-information.aspx without prior written approval of Supplier.
Export Control This Agreement is made subject to any restrictions concerning the export of products or technical information from the United States or other countries that may be imposed on the Parties from time to time. Each Party agrees that it will not export, directly or indirectly, any technical information acquired from the other Party under this Agreement or any products using such technical information to a location or in a manner that at the time of export requires an export license or other governmental approval, without first obtaining the written consent to do so from the appropriate agency or other governmental entity in accordance with Applicable Law.
Export 12.1 Export laws and regulations of the United States and any other relevant local export laws and regulations apply to the Services. Such export laws govern use of the Services (including technical data) and any Services deliverables provided under this Agreement, and You and we each agree to comply with all such export laws and regulations (including “deemed export” and “deemed re-export” regulations). You agree that no data, information, software programs and/or materials resulting from the Services (or direct product thereof) will be exported, directly or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation, or development of missile technology. 12.2 You acknowledge that the Services are designed with capabilities for You and Your Users to access the Services without regard to geographic location and to transfer or otherwise move Your Content between the Services and other locations such as User workstations. You are solely responsible for the authorization and management of User accounts across geographic locations, as well as export control and geographic transfer of Your Content.
