Formation of the Standard Drafting Team and Declaration of Milestone Date Sample Clauses

Formation of the Standard Drafting Team and Declaration of Milestone Date. Upon acceptance by the SC of a SAR for development of a new Standard (or modification or deletion of an existing Standard), the SC shall direct the SPM to develop a qualified balance slate for the SDT using the specific directions and preferences of the SC. The SPM will send out self-nomination forms to solicit SDT nominees. The SDT will consist of a group of people (members of ReliabilityFirst and, as appropriate, non- members) who collectively have the necessary technical expertise and work process skills. The SPM will recommend a slate of ad-hoc individuals or a preexisting task force, work group or similar for the SDT based upon the SC’s desired SDT capabilities. The SC may also direct the SPM to designate an existing ReliabilityFirst committee (or subset thereof) as the SDT augmented by other persons as may be appropriate for the subject matter. The SC will insure that SDT membership includes all necessary administrative support. This support typically includes a ReliabilityFirst staff member and the Originator if he/she chooses to participate. The SC appoints the interim chair (should not be a staff person) of the SDT. The SDT will elect the permanent Chair and Vice-chair at its first meeting. The SPM submits the proposed list of names of the SDT to the SC. The SC will either accept the recommendations of the SPM or modify the SDT slate, as it deems appropriate within 60 days of accepting a SAR for development. Upon approval of the SDT slate, the SC will declare a preliminary date on which the SDT is expected to have ready a completed draft Standard and associated supporting documentation available for consideration by the ReliabilityFirst membership.
AutoNDA by SimpleDocs
Formation of the Standard Drafting Team and Declaration of Milestone Date. Upon acceptance by the RSC of a SAR for development of a new Regional Standard (or modification or deletion of an existing Regional Standard), the RSC shall direct the RSM to assemble a qualified balanced slate for the SDT. The RSM will solicit drafting team nominees by announcing the opening of nominations to the stakeholders in the region. The SDT shall consist of a group of people who collectively have the necessary technical expertise and work process skills to draft the standard being requested in the SAR. The RSM shall recommend to the RSC a slate of ad-hoc individuals or a pre-existing task force, work group, or similar group for the SDT. The membership of the SDT shall not include more than one individual from any one entity. The RSM will manage the SDT to ensure that the Texas RE Standards Development Process is followed, and that the team membership receives all necessary administrative support. This support typically includes a Texas RE staff member and the Originator if he/she chooses to participate. The RSM may develop additional guidelines to assist the SDT, but as a general rule, the RSM will follow the then-current NERC SDT Guidelines and associated NERC SDT procedures in the management of the regional SDTs. The RSC shall appoint the SDT interim chair (should not be a Texas RE staff person). The SDT will elect the permanent Chair and Vice-chair at its first meeting. The RSM shall submit the proposed list of names of the SDT to the RSC. The RSC will either accept the recommendations of the RSM or modify the SDT slate, as it deems appropriate within 60 days of accepting a SAR for development.

Related to Formation of the Standard Drafting Team and Declaration of Milestone Date

  • Completion of Concrete Pours and Emergency Work (a) Except as provided in this sub-clause an Employee shall nor work or be required to work in the rain. (b) Employees shall not be required to start a concrete pour in Inclement Weather. (c) Where a concrete pour has been commenced prior to the commencement of a period of Inclement Weather Employees may be required to complete such concrete pour to a practical stage and for such work shall be paid at the rate of double time calculated to the next hour, and in the case of wet weather shall be provided with adequate wet weather gear. (d) If an Employee’s clothes become wet as a result of working in the rain during a concrete pour the Employee shall, unless the Employee has a change of dry working clothes available, be allowed to go home without loss of pay. (e) The provisions of clauses 32.7(c) and 32.7(d) hereof shall also apply in the case of emergency work where the Employees concerned and their delegates agree that the work is of an emergency nature and can start and/or proceed.

  • CFR Part 200 or Federal Provision - Xxxx Anti-Lobbying Amendment - Continued If you answered "No, Vendor does not certify - Lobbying to Report" to the above attribute question, you must download, read, execute, and upload the attachment entitled "Disclosure of Lobbying Activities - Standard Form - LLL", as instructed, to report the lobbying activities you performed or paid others to perform. Compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). (Contracts, subcontracts, and subgrants of amounts in excess of $100,000) Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and TIPS Members requires the proposer certify that in performance of the contracts, subcontracts, and subgrants of amounts in excess of $250,000, the vendor will be in compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). Does vendor certify compliance? Yes

  • Completion of Negotiations This Agreement represents complete collective bargaining and full agreement by the District and the Federation with respect to wages, hours of employment, and all other terms and conditions of employment which shall prevail during the term or terms hereof. This Agreement expresses the entire understanding between the parties and supersedes all previous agreements between them, written or oral. Any matter or subject not herein covered has been satisfactorily adjusted, compromised, or waived by the parties for the life of this Agreement.

  • Geographic Area and Sector Specific Allowances, Conditions and Exceptions The following allowances and conditions shall apply where relevant. Where the Employer does work which falls under the following headings, the Employer agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.

  • COMPLETION OF MEET AND NEGOTIATION 24.1 During the term of this Agreement, the Association expressly waives and relinquishes the right to meet and negotiate and agrees that the District shall not be obligated to meet and negotiate with respect to any subject or matter whether referred to or covered in this Agreement or not, even though each subject or matters may not have been within the knowledge or contemplation of either or both the District or the Association at the time they met and negotiated on and executed this Agreement, and even though such subjects or matters were proposed and later withdrawn.

  • COMMENCEMENT OF WORK UNDER A SOW AGREEMENT Commencement of work as a result of the SOW-RFP process shall be initiated only upon issuance of a fully executed SOW Agreement and Purchase Order.

  • COMPLETION OF AGREEMENT This document comprises the entire agreement between the District and the Association in the matters lawfully within the scope of negotiation. Neither party shall have any obligation to meet and negotiate during the term of this agreement.

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “ (1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “ (1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • Representations Relating to Documents and Legal Compliance Borrower represents and warrants to Silicon as follows: All statements made and all unpaid balances appearing in all invoices, instruments and other documents evidencing the Receivables are and shall be true and correct and all such invoices, instruments and other documents and all of Borrower's books and records are and shall be genuine and in all respects what they purport to be, and all signatories and endorsers have the capacity to contract. All sales and other transactions underlying or giving rise to each Receivable shall fully comply with all applicable laws and governmental rules and regulations. All signatures and endorsements on all documents, instruments, and agreements relating to all Receivables are and shall be genuine, and all such documents, instruments and agreements are and shall be legally enforceable in accordance with their terms.

  • Duration and Scope of Covenants If any court or other decision-maker of competent jurisdiction determines that any of the Executive’s covenants contained in this Agreement, including, without limitation, any of the Restrictive Covenants, or any part thereof, is unenforceable because of the duration or geographical scope of such provision, then, after such determination has become final and unappealable, the duration or scope of such provision, as the case may be, shall be reduced so that such provision becomes enforceable and, in its reduced form, such provision shall then be enforceable and shall be enforced.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!