Goals and Objectives of the Agreement Agreement Goals The goals of this Agreement are to: ● Reduce wildfire risk related to the tree mortality crisis; ● Provide a financial model for funding and scaling proactive forestry management and wildfire remediation; ● Produce renewable bioenergy to spur uptake of tariffs in support of Senate Bill 1122 Bio Market Agreement Tariff (BioMat) for renewable bioenergy projects, and to meet California’s other statutory energy goals; ● Create clean energy jobs throughout the state; ● Reduce energy costs by generating cheap net-metered energy; ● Accelerate the deployment of distributed biomass gasification in California; and ● Mitigate climate change through the avoidance of conventional energy generation and the sequestration of fixed carbon from biomass waste. Ratepayer Benefits:2 This Agreement will result in the ratepayer benefits of greater electricity reliability, lower costs, and increased safety by creating a strong market demand for forestry biomass waste and generating cheap energy. This demand will increase safety by creating an economic driver to support forest thinning, thus reducing the risk of catastrophic wildfire and the associated damage to investor-owned utility (IOU) infrastructure, such as transmission lines and remote substations. Preventing this damage to or destruction of ratepayer-supported infrastructure lowers costs for ratepayers. Additionally, the ability of IOUs to use a higher- capacity Powertainer provides a much larger offset against the yearly billion-dollar vegetation management costs borne by IOUs (and hence by ratepayers). The PT+’s significant increase in waste processing capacity also significantly speeds up and improves the economics of wildfire risk reduction, magnifying the benefits listed above. The PT+ will directly increase PG&E’s grid reliability by reducing peak loading by up to 250 kilowatt (kW), and has the potential to increase grid reliability significantly when deployed at scale. The technology will provide on-demand, non- weather dependent, renewable energy. The uniquely flexible nature of this energy will offer grid managers new tools to enhance grid stability and reliability. The technology can be used to provide local capacity in hard-to-serve areas, while reducing peak demand. Technological Advancement and Breakthroughs:3 This Agreement will lead to technological advancement and breakthroughs to overcome barriers to the achievement of California’s statutory energy goals by substantially reducing the LCOE of distributed gasification, helping drive uptake of the undersubscribed BioMAT program and increasing the potential for mass commercial deployment of distributed biomass gasification technology, particularly through net energy metering. This breakthrough will help California achieve its goal of developing bioenergy markets (Bioenergy Action Plan 2012) and fulfil its ambitious renewable portfolio standard (SB X1-2, 2011-2012; SB350, 2015). The PT+ will also help overcome barriers to achieving California’s greenhouse gas (GHG) emissions reduction (AB 32, 2006) and air quality improvement goals. It reduces greenhouse gas and criteria pollutants over three primary pathways: 1) The PT+’s increased capacity and Combined Heat and Power (CHP) module expand the displacement of emissions from conventional generation; 2) the biochar offtake enables the sequestration of hundreds of tons carbon that would otherwise have been released into the atmosphere; and 3) its increased processing capacity avoids GHG and criteria emissions by reducing the risk of GHG emissions from wildfire and other forms of disposal, such as open pile burning or decomposition. The carbon sequestration potential of the biochar offtake is particularly groundbreaking because very few technologies exist that can essentially sequester atmospheric carbon, which is what the PT+ enables when paired with the natural forest ecosystem––an innovative and groundbreaking bio-energy technology, with carbon capture and storage. Additionally, as noted in the Governor’s Clean Energy Jobs Plan (2011), clean energy jobs are a critical component of 2 California Public Resources Code, Section 25711.5(a) requires projects funded by the Electric Program Investment Charge (EPIC) to result in ratepayer benefits. The California Public Utilities Commission, which established the EPIC in 2011, defines ratepayer benefits as greater reliability, lower costs, and increased safety (See CPUC “Phase 2” Decision 00-00-000 at page 19, May 24, 2012, xxxx://xxxx.xxxx.xx.xxx/PublishedDocs/WORD_PDF/FINAL_DECISION/167664.PDF). 3 California Public Resources Code, Section 25711.5(a) also requires EPIC-funded projects to lead to technological advancement and breakthroughs to overcome barriers that prevent the achievement of the state’s statutory and energy goals. California’s energy goals. When deployed at scale, the PT+ will result in the creation of thousands of jobs across multiple sectors, including manufacturing, feedstock supply chain (harvesting, processing, and transportation), equipment operation, construction, and project development. ● Annual electricity and thermal savings; ● Expansion of forestry waste markets; ● Expansion/development of an agricultural biochar market; ● Peak load reduction; ● Flexible generation; ● Energy cost reductions; ● Reduced wildfire risk; ● Local air quality benefits; ● Water use reductions (through energy savings); and ● Watershed benefits.
Goals and Objectives The purpose of this Agreement is to ensure that the proper elements and commitments are in place to provide consistent service support and delivery to the customers by the Service Providers. The goal of this Agreement is to obtain mutual agreement for the provision of information and communication between the Service Provider and customer. The objective of this Agreement is to: • Provide clear reference to service ownership, accountability, roles and responsibilities. • Present clear, concise and measurable description of service provision to the customer. • Match perceptions of the expected service provision with actual service support and delivery.
Objectives of Agreement To enable the Company to perform work in the activities covered by this Agreement in a productive and efficient manner. • To enable employees to work in a productive, efficient, flexible and safe manner in accordance with their full skill and competence to meet the requirements of the Company and their clients. • To provide appropriate remuneration and conditions of employment for employees working under the terms of the Agreement.
Agreement Objectives (a) The fundamental objective that the Parties have in creating the Agreement is to produce an agreed industrial relations framework that encourages achievement of the following goals on the Project. (1) A safe and healthy Project Site environment where everyone works towards achieving the health and safety management philosophy of an injury and incident free Project; (2) A Project where everyone has the opportunity to perform their best work and achieve a sense of personal satisfaction by the time they complete their work assignment; (3) A Project where all participants' efforts and best work translate into a high quality result for the Project; (4) A Project where all participants work toward the common goal of completing the construction work on the Project within the defined schedule and budget; (5) A Project where leaders focus on understanding and dealing with people issues; (6) A Project where all participants listen to others point of view and act to amicably resolve any differences of opinion that may occur from time to time without ever resorting to unreasonable or unlawful means to achieve the result they wish to achieve; (7) A Project where, by all the participants acting in a considerate and respectful manner, positive relations with the local community they are performing the construction work in are maintained. (b) The Employer is accountable to: (1) Provide the management resource and support needed to achieve an injury and incident free Project; (2) Encourage its leaders to focus on issues raised by any member of their team; (3) Ensure its leaders act to address appropriately and in a timely manner, any concern raised by any member of their team; (4) Act at all times with fairness, honesty and in a trustworthy manner, responding to issues or concerns raised in a timely manner; (5) Recognise the talents and capabilities of their Employees and encourage excellence in construction execution. (c) Each Employee is accountable to: (1) Establish and maintain a safe and healthy work area, ensure safe and healthy work practices are followed at all times and within their duty of care, take responsibility for their personal safety and the safety of other Employees; (2) Comply with Project environmental health and safety regulations, procedures and practices; (3) Participate in and comply with the Project’s cultural and environmental processes; (4) Ensure their personal fitness for work on each day they are scheduled to work; (5) In all of their dealings with other Employees and their Employer, act with fairness and respect; (6) Work towards both the Project and their team’s goals to the full extent of their personal capacity; and (7) Raise any personal concern/issue directly with their immediate team leader/supervisor thereby providing the Employer with an opportunity to resolve/assist the concern/issue. If the team leader/supervisor is not available, then raise the matter with a more senior Employer leader.
Scope and Objectives 1. This Partnership Agreement (hereinafter referred to as the “Agreement”) defines the rights and obligations of the Parties and sets forth the terms and conditions of their cooperation in the implementation of the Project. 2. The Parties shall act in accordance with the legal framework of the EEA Financial Mechanism 2014-2021, namely with the Regulation on the implementation of the EEA Financial Mechanism 2014-2021 (hereinafter referred to as the “Regulation”). The Parties expressly acknowledge to have access to and to be familiar with the content of the Regulation. 3. Any Annexes to this Agreement constitute an integral part of the Agreement. In case of inconsistencies between the Annexes and the Agreement, the latter shall prevail.
Purpose and Objectives The primary purpose of this procedure shall be to obtain, at the lowest administrative level and in the shortest period of time, equitable solutions to grievances which may arise from time to time. Grievance proceedings shall be handled confidentially.
Project Objectives 1.1 (Type the Project objectives)
BACKGROUND AND OBJECTIVES The partnership proposed by the Cooperator was selected due to merit review evaluations from the 2017 Notice of Funding Opportunity P17AS00037. The Cooperator demonstrated expertise in disciplines and subject areas of relevance to cooperative research and training. The Cooperator met the program interests of NPS with expertise, facilities, experience, diversity of programs, and history of collaborative research projects. The Cooperator helps the NPS-CESU to meet its objectives to: Provide research, technical assistance and education to NPS for land management, and research; Develop a program of research, technical assistance and education that involves the biological, physical, social, and cultural sciences needed to address resources issues and interdisciplinary problem-solving at multiple scales and in an ecosystem context at the local, regional, and national level; and Place special emphasis on the working collaboration among NPS, universities, and their related partner institutions. The CESU network seeks to provide scientifically-based information on the nature and status of selected biological, physical, and cultural resources occurring within the parks in a form that increases its utility for making management decisions, conducting scientific research, educating the public, developing effective monitoring programs, and developing management strategies for resource protection. Studying the resources present in NPS parks benefits the Cooperator’s goal of advancing knowledge through scientific discovery, integration, application, and teaching, which lead toward a holistic understanding of our environmental and natural resources. The Cooperator is a public research university, sharing research, educational, and technological strengths with other institutions. Through inter-institutional collaboration, combined with the unique contributions of each constituent institution, the Cooperator strives to contribute substantially to the cultural, economic, environmental, scientific, social and technological advancement of the nation. The NPS expects there to be substantial involvement between itself and the Cooperator in carrying out the activities contemplated in this Agreement. The primary purpose of this study is not the acquisition of property or services for the direct benefit or use by the Federal Government, but rather to accomplish a public purpose of support or stimulation authorized the Legislative Authorities in ARTICLE II. This agreement fulfills the Public Purpose of support and economic stimulation for the following reasons: Projects will engage recipients, partners, communities, and/or visitors in shared environmental stewardship. Projects will promote greater public and private participation in historic preservation programs and activities. The project builds resource stewardship ethics in its participants. The information, products and/or services identified or developed by projects will be shared through a variety of strategies to increase public awareness, knowledge and support for historic preservation and stewardship of the nation’s cultural and historical heritage. Projects will support the Government’s objective to provide opportunities for youth to learn about the environment by spending time working on projects in National Parks. The NPS receives the indirect benefit of completing conservation projects. Projects will motivate youth participants to become involved in the natural, cultural and /or historical resource protection of their communities and beyond. Students gain “real world” or hands-on experience outside of the classroom of natural, cultural and/or historical resource projects. The scientific community and/or researchers external to NPS gains by new knowledge provided through research and related results dissemination of natural, cultural and/or historical resource information. Projects assist in the creation, promotion, facilitation, and/or improvement of the public’s understanding of natural, cultural, historic, recreational and other aspects of areas such as ecological conservation areas, and state and local parks. For performance under this cooperative agreement, the regulations set forth in 2 CFR, Part 200, supersedes OMB Circulars A–21 (2 CFR 220), A–87 (2 CFR 225), A–110, and A–122 (2 CFR 230); Circulars A–89, A–102, and A–133; and the guidance in Circular A–50 on Single Audit Act follow–up apply. The Cooperator shall adhere to 2 CFR, Part 200 in its entirety in addition to any terms and conditions of the master agreement not superseded by 2 CFR 200, as well as the terms and conditions set forth in this agreement. In the event of a conflict between the original terms of the master agreement and 2 CFR, Part 200, relating to this task agreement, 2 CFR, Part 200 shall take precedence.
Objectives and Commitments 7.1 The Objectives of the Parties to this Agreement are: (a) to promote fair, cooperative and productive workplace relations in the building and construction industry; (b) to provide a detailed set of agreed employment benefits, conditions, rights and obligations; (c) to explore the potential for innovation and new technologies; (d) to consider any benefits of alternative hours of work; (e) to support the establishment of consultative bodies to consider the impact of climate change on the working conditions in the industry; (f) to establish practices that support opportunities for a diversified workforce; (g) to support the implementation of highest possible levels of OHS practices, procedures and training; (h) to ensure that fair and equitable employment practices are applied in the workplace; (i) to improve efficiency in the workplace; (j) to provide for the establishment and observance of an effective disputes settlement procedure that involves Employees and their representatives, when requested, at the earliest stage of any dispute or potential dispute. 7.2 The Parties to this Agreement commit themselves to ensuring that: (a) The efficiency measures contained in this Agreement are implemented and lead to real gains in productivity. (b) The principles of industry modernisation are realised during the life of this Agreement (in accordance with Part 11). (c) Productivity gains will not be achieved at the expense of health and safety standards. (d) The disputes settlement procedures provided herein are strictly adhered to. (e) Employment should wherever possible be full time and on going.
OBJECTIVES OF THE AGREEMENT 7.1 The parties agree that key objectives of this agreement are; (a) to provide terms and conditions of employment commensurate with the challenges associated with working in the construction industry (b) to provide safe working conditions (c) to provide a functional work/life balance and a comfortable standard of living (d) providing a framework that seeks to maximise productivity and minimise lost time. 7.2 This shall be achieved through genuine communication, consultation, collaboration and a sensible and practical application of terms contained in this agreement.
