Grading and Compaction Sample Clauses

Grading and Compaction. Shape, grade and compact the mixture to the lines, grades and depths indicated in the Plans, cross sections and Specifications. Maintain the existing or new crown of the pavement. Monitor in-place density during the compaction process with nuclear density gauge per AASHTO T 310. Compact to a minimum density of 97% and correlate to the wet density according to AASHTO T 180 method D and Table 301-A.14:1 “Contractor and NMDOT Sampling and Testing Requirements”. Obtain the in place density by measuring at the top of foamed stabilized section. Monitor the compaction process by determining the density of foamed stabilized base with a portable nuclear density gauge in accordance with AASHTO T 310. Furnish the nuclear gauge readings. Once lines, grades and depths are met, excess Material shall be hauled back to the stockpile so as to allow for the net placement of new pavement Material as specified on the Plans or as directed by Project Manager.
AutoNDA by SimpleDocs
Grading and Compaction. In a single lift, place the total required compacted thickness of not less than

Related to Grading and Compaction

  • Compaction 11.1 Concrete shall be thoroughly compacted and fully worked around the reinforcement, around embedded fixtures and into corners of the formwork.

  • Local Control Center, Metering and Telemetry The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.

  • Skidding and Yarding Methods of skid- ding or yarding specified for particular areas, if any, are indicated on Sale Area Map. Outside Clearcutting Units and construction clearings, insofar as ground conditions permit, products shall not be skidded against reserve trees or groups of reproduction and tractors shall be equipped with a winch to facilitate skidding. B6.421 Rigging. Insofar as practicable, needed rigging shall be slung on stumps or trees desig- nated for cutting.

  • Dewatering 4.7.1 Where a part of a site is affected by surface water following a period of rain, thus rendering some areas unsafe for productive work, consistent with the Employer’s obligations under the OH&S Act, all non- trades employees shall assist in ‘dewatering’ their own work site or area if it is so affected. Such work to be paid at single time rates. Productive work will continue in areas not so affected.

  • Monitoring and Management Information C10.1 The Contractor shall comply with the monitoring arrangements set out in the Monitoring Schedule including, but not limited to, providing such data and information as the Contractor may be required to produce under the Contract.

  • Erosion and Sediment Control The Contractor shall install and maintain erosion and sediment control devices to prevent adjacent streets, storm drains and property from accumulations of soil, sediment, or dust which result from his work. Devices installed to control sediment and prevent erosion shall comply with the requirements of the Georgia Tech Project Superintendent. The Contractor is responsible for monitoring downstream conditions throughout the construction period and clearing any debris, sediment, and dust caused by the progress of the Work. The Contractor shall inspect, maintain, and clear erosion and sediment control devices at least weekly unless otherwise directed by the Georgia Institute of Technology Construction Manager. At the conclusion of the Work, the Contractor shall remove all installed devices and restoring the site to the satisfaction of the Georgia Tech Construction Manager.

  • Monitoring and Review 5.1 The Council and the BID Company shall set up the Standard Services Review Panel within 28 days from the date of this Agreement the purpose of which shall be to:

  • Monitoring and Recording COMMUNICATIONS - We may monitor and record communications between you and us, including telephone conversations, electronic messages, electronic records, or other data transmissions that affect your accounts or other products and services. Except as otherwise prohibited by applicable law, you agree we may monitor and record such communications without your approval or further notice to you.

  • Stormwater Management The Owner agrees that stormwater management measures shall be applicable to the development of the Lands, in a manner which is in accordance with the provisions of The Drainage Act, R.S.O. 1990, c.D.17 and amendments thereto, and to the satisfaction of the Municipality's Engineer.

  • Monitoring and Compliance Every year during the term of this Agreement on the anniversary date of the effective date of the Agreement, the Restaurant shall provide to the United States a narrative report of the actions taken during the reporting period to remove any barriers to access and otherwise enhance accessibility for individuals with disabilities at the Restaurant and any plans for action concerning ADA compliance in the coming year. The report shall include as an exhibit copies of any complaint, whether formal or informal, received during the reporting period alleging that the Restaurant was not being operated in compliance with the ADA or otherwise discriminated against any person on account of disability. The Owner and Operator of the Restaurant shall cooperate in good faith with any and all reasonable requests by the United States for access to the Restaurant and for information and documents concerning the Restaurant's compliance with this Agreement and the ADA. The United States shall have the right to verify compliance with this Agreement and the ADA, both as set forth in this Agreement and through any means available to the general public, including visits to the public areas of the Restaurant and communications with Restaurant staff. The United States shall have the right to inspect the facility at any time, and counsel for the United States need not identify themselves in the course of visits to the public areas.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!