CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
What Forms of Distribution Are Available from a Xxxxxxxxx Education Savings Account Distributions may be made as a lump sum of the entire account, or distributions of a portion of the account may be made as requested.
Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.
Rollovers of Settlement Payments From Bankrupt Airlines If you are a qualified airline employee who has received a qualified airline settlement payment from a commercial airline carrier under the approval of an order of a federal bankruptcy court in a case filed after September 11, 2001, and before January 1, 2007, you are allowed to roll over any portion of the proceeds into your Xxxx XXX within 180 days after receipt of such amount, or by a later date if extended by federal law. For further detailed information and effective dates you may obtain IRS Publication 590-A, Contributions to Individual Retirement Arrangements (IRAs), from the IRS or refer to the IRS website at xxx.xxx.xxx.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.
How Are Distributions from a Xxxx XXX Taxed for Federal Income Tax Purposes Amounts distributed to you are generally excludable from your gross income if they (i) are paid after you attain age 59½, (ii) are made to your beneficiary after your death, (iii) are attributable to your becoming disabled, (iv) subject to various limits, the distribution is used to purchase a first home or, in limited cases, a second or subsequent home for you, your spouse, or you or your spouse’s grandchild or ancestor, or (v) are rolled over to another Xxxx XXX. Regardless of the foregoing, if you or your beneficiary receives a distribution within the five-taxable-year period starting with the beginning of the year to which your initial contribution to your Xxxx XXX applies, the earnings on your account are includable in taxable income. In addition, if you roll over (convert) funds to your Xxxx XXX from another individual retirement plan (such as a Traditional IRA or another Xxxx XXX into which amounts were rolled from a Traditional IRA), the portion of a distribution attributable to rolled-over amounts which exceeds the amounts taxed in connection with the conversion to a Xxxx XXX is includable in income (and subject to penalty tax) if it is distributed prior to the end of the five-tax-year period beginning with the start of the tax year during which the rollover occurred. An amount taxed in connection with a rollover is subject to a 10% penalty tax if it is distributed before the end of the five-tax-year period. As noted above, the five-year holding period requirement is measured from the beginning of the five-taxable-year period beginning with the first taxable year for which you (or your spouse) made a contribution to a Xxxx XXX on your behalf. Previously, the law required that a separate five-year holding period apply to regular Xxxx XXX contributions and to amounts contributed to a Xxxx XXX as a result of the rollover or conversion of a Traditional IRA. Even though the holding period requirement has been simplified, it may still be advisable to keep regular Xxxx XXX contributions and rollover/ conversion Xxxx XXX contributions in separate accounts. This is because amounts withdrawn from a rollover/conversion Xxxx XXX within five years of the rollover/conversion may be subject to a 10% penalty tax. As noted above, a distribution from a Xxxx XXX that complies with all of the distribution and holding period requirements is excludable from your gross income. If you receive a distribution from a Xxxx XXX that does not comply with these rules, the part of the distribution that constitutes a return of your contributions will not be included in your taxable income, and the portion that represents earnings will be includable in your income. For this purpose, certain ordering rules apply. Amounts distributed to you are treated as coming first from your non-deductible contributions. The next portion of a distribution is treated as coming from amounts which have been rolled over (converted) from any non-Xxxx IRAs in the order such amounts were rolled over. Any remaining amounts (including all earnings) are distributed last. Any portion of your distribution which does not meet the criteria for exclusion from gross income may also be subject to a 10% penalty tax. Note that to the extent a distribution would be taxable to you, neither you nor anyone else can qualify for capital gains treatment for amounts distributed from your account. Similarly, you are not entitled to the special five- or ten- year averaging rule for lump-sum distributions that may be available to persons receiving distributions from certain other types of retirement plans. Rather, the taxable portion of any distribution is taxed to you as ordinary income. Your Xxxx XXX is not subject to taxes on excess distributions or on excess amounts remaining in your account as of your date of death. You must indicate on your distribution request whether federal income taxes should be withheld on a distribution from a Xxxx XXX. If you do not make a withholding election, we will not withhold federal or state income tax. Note that, for federal tax purposes (for example, for purposes of applying the ordering rules described above), Xxxx IRAs are considered separately from Traditional IRAs.
Distributions Upon Income Inclusion Under Section 409A of the Code Upon the inclusion of any portion of the benefits payable pursuant to this Agreement into the Executive’s income as a result of the failure of this non-qualified deferred compensation plan to comply with the requirements of Section 409A of the Code, to the extent such tax liability can be covered by the Executive’s vested accrued liability, a distribution shall be made as soon as is administratively practicable following the discovery of the plan failure.
CAMPAIGN CONTRIBUTION AND SOLICITATION LIMITATIONS No state contractor, prospective state contractor, principal of a state contractor or principal of a prospective state contractor, with regard to a state contract or state contract solicitation with or from a state agency in the executive branch or a quasi-public agency or a holder, or principal of a holder of a valid prequalification certificate, shall make a contribution to (i) an exploratory committee or candidate committee established by a candidate for nomination or election to the office of Governor, Lieutenant Governor, Attorney General, State Comptroller, Secretary of the State or State Treasurer, (ii) a political committee authorized to make contributions or expenditures to or for the benefit of such candidates, or (iii) a party committee (which includes town committees). In addition, no holder or principal of a holder of a valid prequalification certificate, shall make a contribution to (i) an exploratory committee or candidate committee established by a candidate for nomination or election to the office of State senator or State representative, (ii) a political committee authorized to make contributions or expenditures to or for the benefit of such candidates, or (iii) a party committee. On and after January 1, 2011, no state contractor, prospective state contractor, principal of a state contractor or principal of a prospective state contractor, with regard to a state contract or state contract solicitation with or from a state agency in the executive branch or a quasi-public agency or a holder, or principal of a holder of a valid prequalification certificate, shall knowingly solicit contributions from the state contractor's or prospective state contractor's employees or from a subcontractor or principals of the subcontractor on behalf of (i) an exploratory committee or candidate committee established by a candidate for nomination or election to the office of Governor, Lieutenant Governor, Attorney General, State Comptroller, Secretary of the State or State Treasurer, (ii) a political committee authorized to make contributions or expenditures to or for the benefit of such candidates, or (iii) a party committee. State contractors and prospective state contractors are required to inform their principals of the above prohibitions, as applicable, and the possible penalties and other consequences of any violation thereof. Contributions or solicitations of contributions made in violation of the above prohibitions may result in the following civil and criminal penalties: Civil penalties—Up to $2,000 or twice the amount of the prohibited contribution, whichever is greater, against a principal or a contractor. Any state contractor or prospective state contractor which fails to make reasonable efforts to comply with the provisions requiring notice to its principals of these prohibitions and the possible consequences of their violations may also be subject to civil penalties of up to $2,000 or twice the amount of the prohibited contributions made by their principals. Criminal penalties—Any knowing and willful violation of the prohibition is a Class D felony, which may subject the violator to imprisonment of not more than 5 years, or not more than $5,000 in fines, or both.
Distribution of UDP and TCP queries DNS probes will send UDP or TCP “DNS test” approximating the distribution of these queries.
