Increase in Technology Transfer Sample Clauses

Increase in Technology Transfer. It is found that international trade, particularly imports of capital goods, plays an important role in the transfer of technology to Vietnam. FDI as a channel for technology transfer is not only limited in only ASEAN states but also FDI from AFTA+ countries such as a source of technology transfer. It is also said that the skill of the labor force is an important determinant of technology adoption at the national level. Through bilateral exchanges under FTAs, businesses from economic partners would have opportunities to cooperate closely in the fields of clean technology transfer, human resource development and financial investment. Vietnamese government attaches great importance to boosting the application of scientific and technological advances to production and business, as well as to receiving latest technologies from other countries. In recent years, Vietnam has signed many cooperative agreements in technology transfer with ASEAN states and economic partners in ASEAN. As can be seen, Vietnam can provide cheap labor forces, but firms in Vietnam do not have sufficient technological and managerial capabilities to participate in international production networks. So there is a need for Vietnam to attract international technology transfer to achieve international business standards. Paying more attention to technology transfer since new technologies have been utilized widely in the world would be simpler to import technologies to utilize domestically. For over 10 years of attracting FDI, agriculture and rural development has attracted a certain amount of capital investment. However, the amount of direct investment and technology transfer have not met the demand for fundamental change in the level and technological capacity in all sectors of the technology applied in agriculture and rural relatively backward. According to recent statistics, Vietnam is an agricultural country, agricultural source material is plentiful but the equipment and agro-processing technologies are not capable of producing export goods. Obviously, government agencies should apply reasonable policies to encourage foreign investors to transfer technology. Since every year, Vietnam imports 10 billion dollars worth of technologies, while the technology export turnover remains very modest.
Sample 1
AutoNDA by SimpleDocs

Related to Increase in Technology Transfer

  • Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.

  • DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK Firms and/or individuals that assisted in the development or drafting of the specifications, requirements, statements of work, or solicitation documents contained herein are excluded from competing for this solicitation. This shall not be applicable to firms and/or individuals providing responses to a publicly posted Request for Information (RFI) associated with a solicitation.

  • Research, Science and Technology Cooperation 1. The aims of cooperation in research, science and technology, carried out in the mutual interest of the Parties and in compliance with their policies, will be: (a) to build on existing agreements already in place for cooperation on research, science and technology; (b) to encourage, where appropriate, government agencies, research institutions, universities, private companies and other research organizations in the Parties to conclude direct arrangements in support of cooperative activities, programs or projects within the framework of this Agreement, specially related to trade and commerce; and (c) to focus cooperative activities towards sectors where mutual and complementary interests exist, with special emphasis on information and communication technologies and software development to facilitate trade between the Parties. 2. The Parties will encourage and facilitate, as appropriate, the following activities including, but not limited to:

  • License Transfer You may not transfer the software to a third party without Microsoft’s prior written consent. If permitted, there may be additional charges for transferring the software to a third party.

  • COMPENSATION FOR CONSTRUCTION PHASE SERVICES 5.1 For the Construction Manager’s performance of the Work as described in Section 2.3, the Owner shall pay the Construction Manager the Contract Sum in current funds. The Contract Sum is the Cost of the Work as defined in Section 6.1.1 plus the Construction Manager’s Fee.

  • Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Generator Deactivation Solution, the ISO shall tender to the Developer that proposed the selected transmission Generator Deactivation Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its reliability planning process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Generator Deactivation Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Generator Deactivation Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.

  • General Education Requirements for Azusa Pacific University Requirement Helpful Hints & Comments First-Year Seminar Course must focus on orientation to college academics while maintaining instruction in orientation, transitions, and holistic wellness. Typically, a 3-unit course. Not required for students who transfer in 30+ units. Writing 1: The Art & Craft of Writing Any first-semester composition course. Often titled "Freshman Composition," "College Composition," or "Reading and Composition." Must include basic research skills and a research paper. Writing 2: Genre, Evidence, & Persuasion Courses titled "Critical Thinking," "Advanced Composition," etc., that follow a basic freshman level writing course. These courses involve the use of logic, critical thinking, rhetoric, and advanced composition. In addition, genre-specific writing courses will introduce students to the genres of writing, rhetorical moves, and forms of evidence in a specific discipline. Possible courses include: Writing in the Humanities, Writing in the Social Sciences, Writing in the Arts, Writing in Theology, Writing in Business, Writing in Nursing, etc. Must include a research component. Writing 3: Writing in the Disciplines This category focuses on preparing students to be professionals in a field by being independent thinkers capable of constructing their own knowledge, including producing polished writing products in the genres of writing that students are likely to use in their future professions. Most courses in this category are required for the specific APU major and are therefore not likely to be fulfilled by a student's transfer work. Oral Communication Any Public Speaking or Oral Communication course. Must contain at least 3 individual public speeches. Also, communication courses in Interpersonal, Small Group, Argumentation and Debate, and Intercultural areas are acceptable (however, some majors may require Public Speaking). Cannot be taken as a hybrid course. Personal Wellness Any physical activity course with a cardio component and instruction in fitness principles. This includes individual activities, team sports, dance, yoga/mat exercise courses, and intercollegiate sports. Activities with limited physical activity such as badminton, golf, bowling, etc. will not fulfill the requirement. Quantitative Literacy Any course from the Math department of the transferring school that has a prerequisite of Intermediate Algebra. However, certain majors require College Algebra. Please refer to the APU catalog to determine whether or not your major requires College Algebra. In addition, Statistics and Applied Statistics courses (e.g. "Statistics for Behavioral Sciences") with an Intermediate Algebra prerequisite will meet this requirement. Biblical, Theological, & Philosophical Formation- Philosophy Requirement Must be a broad philosophy course such as Intro to Philosophy, History of Philosophy, philosophy-based Logic, Critical Thinking, and Ethics. All other courses must be evaluated by the Department of Theology & Philosophy for transfer. Humanities- History, Literature, & Fine Arts Requirement Must choose one course from each discipline (3 courses total): History, Literature, and Fine Arts. History courses must be survey courses in world, western, or U.S. history (typically split into two time periods). Literature courses must be broad, surveys of literature that explore the literary genres of fiction, drama, and poetry. Fine Arts courses must be broad, survey courses in Art, Music, Drama, or Theater (sometimes History of Cinema, Drama, or Theater courses) covering approximately 100 years. These must be lecture courses and not studio or applied courses such as drawing, painting, singing, piano, etc. Examples of acceptable courses from these categories include (but not limited to) World Civilizations to 1648, Intro to Literature, Art History, Music Fundamentals, etc. Social Sciences One course from the following disciplines: Sociology, Psychology, Economics, Anthropology, Communication Studies, or Political Science. Examples of courses include (but not limited to) Intro to Sociology, General Psychology, Intro to Criminal Justice, Cultural Anthropology, Mass Media, etc. Natural Sciences One course: lecture and lab component required. Any basic course in the life or physical sciences. Examples of courses include Fundamentals of Biology, General Biology, Fundamentals of Chemistry, General Chemistry, Introduction to Astronomy, Physical Geology/Geography, Fundamentals of Physics, General Physics, Oceanography, Zoology, Marine Biology. Biology and Chemistry labs cannot be taken online. However, certain majors require specific science courses. Please refer to the APU catalog to determine whether or not your major requires specific science courses.

  • Design Development Phase Services 3.3.1 Based on the Owner’s approval of the Schematic Design Documents, and on the Owner’s authorization of any adjustments in the Project requirements and the budget for the Cost of the Work, the Architect shall prepare Design Development Documents for the Owner’s approval. The Design Development Documents shall illustrate and describe the development of the approved Schematic Design Documents and shall consist of drawings and other documents including plans, sections, elevations, typical construction details, and diagrammatic layouts of building systems to fix and describe the size and character of the Project as to architectural, structural, mechanical and electrical systems, and other appropriate elements. The Design Development Documents shall also include outline specifications that identify major materials and systems and establish, in general, their quality levels.

  • PENALTIES PURSUANT TO HEALTH & SAFETY CODE § 25249.7(b) In settlement of all the claims referred to in this Settlement Agreement, Xxxxx shall pay $500.00 as a Civil Penalty in accordance with this Section. The Civil Penalty payment shall be allocated in accordance with California Health & Safety Code §§ 25249.12(c)(1) and (d), with 75% of the Penalty remitted to OEHHA and the remaining 25% of the Penalty remitted to Xxxxxxxx. The Civil Penalty payment(s) shall be delivered to the addresses identified in § 3.2, below. For all amounts due and owing that are not received within the payment times set forth below, Xxxxx shall pay a late civil penalty payment fee equal to $100/day to be allocated in accordance with California Health & Safety Code § 25249.12(c)(1) and (d).

  • XXXX ANTI-LOBBYING AMENDMENT Xxxx Anti-Lobbying Amendment (31U.S.C. 1352) – Contractors that apply or bid for an award exceeding ,000 must file the required anti-lobbying certification. Each tier must certify to the tier above that it will not and has not used Federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of any agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any Federal contract, grant or any other award covered by 31 U.S.C. 1352. Each tier must also disclose any lobbying with non-Federal funds that takes place in connection with obtaining any Federal award. Such disclosures are forwarded from tier to tier up to the Customer. As applicable, Contractor agrees to file all certifications and disclosures required by, and otherwise comply with, the Xxxx Anti-Lobbying Amendment (31 USC 1352).Contractor certifies that it is currently in compliance with all applicable provisions of the Xxxx Anti-Lobbying Amendment (31 U.S.C. 1352) and will continue to be in compliance throughout the term of the Contract and further certifies that:

Time is Money Join Law Insider Premium to draft better contracts faster.