Initial Installation of Communications Equipment; Modifications; Replacements Sample Clauses

Initial Installation of Communications Equipment; Modifications; Replacements. Prior to the initial installation of the Communications Equipment and prior to any subsequent modification or replacement of the Communications Equipment, Tenant shall submit to Landlord, for Landlord’s reasonable approval, (i) detailed plans showing all Communications Equipment, the manner of the installation of the Communications Equipment and the locations of the installations and (ii) such evidence as Landlord shall reasonably require evidencing that Tenant has obtained all necessary governmental approvals and permits for the installation and modification of the Communications Equipment. All work shall be performed in accordance with applicable Legal Requirements, Landlord’s reasonable construction requirements for the Building and by contractors reasonably approved in advance by Landlord. Landlord shall have no responsibility for, and Tenant holds Landlord harmless from, any failure of Tenant’s Communications Equipment to function properly notwithstanding the fact that Landlord may have approved plans and specifications therefor. Tenant shall keep the Building free from any liens arising out of any work performed, materials furnished or obligations incurred with respect to the Communications Equipment. Unless otherwise agreed by Landlord in writing, Tenant shall give Landlord not less than ten (10) days prior written notice of the commencement of any work by Tenant under this Paragraph 61.d. Tenant shall cause Tenant’s personnel or contractor(s) to clearly xxxx (including any color coding required by the Building) each conduit, cable, wire and piece of equipment comprising the Lines with the License number assigned by the Building management and the starting point and the destination of such conduit, cable or wire (e.g. “No. 700, Roof to Floor 7”), and shall place such identification tags in each closet, if any, that the Lines pass through, on each horizontal run of the Lines, and on each item of Communications Equipment that is part of the Lines.
AutoNDA by SimpleDocs

Related to Initial Installation of Communications Equipment; Modifications; Replacements

  • Communications Equipment Members of the board of directors or any committee thereof may participate in and act at any meeting of such board or committee through the use of a conference telephone or other communications equipment by means of which all persons participating in the meeting can hear each other, and participation in the meeting pursuant to this section shall constitute presence in person at the meeting.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations 7.1 Lessee's Obligations.

  • Maintenance Repairs and Alterations 6.01 Tenant's Obligations to Repair ------------------------------ Tenant shall at its sole cost and expense, maintain in clean and safe condition, and make all repairs and replacements to the Premises and every part thereof, structural and non-structural, so as to keep, maintain and preserve the Premises in first class condition and repair, including, without limitation, the roof, the foundation, the heating, ventilation and air conditioning system ("HVAC"), elevators, if any, all plumbing and sewage facilities, fire sprinklers, electrical and lighting facilities, systems, appliances, and equipment within the Premises, fixtures, interior and exterior walls, floors, ceilings, windows, doors, entrances, all interior and exterior glass (including plate glass), and skylights located within the Premises, and all sidewalks, service areas, parking areas and landscaping comprising part of the Premises. All repairs and replacements required to be made by Tenant shall be made promptly with new materials of like kind and quality to those used in the original construction of the Premises. If the repair or replacement work affects the structural parts of the Premises, or if the estimated cost of any item or repair or replacement exceeds $10,000, then Tenant shall first obtain Landlord's written approval of the scope of work, plans therefor, and materials to be used. Any such work shall be performed by Landlord's contractor or by such contractor as Tenant may choose from an approved list to be submitted by Landlord. Landlord shall have the right to make any repairs or replacements which are not promptly made by Tenant and charge Tenant, as Additional Rent, for the cost thereof together with interest thereon at the Agreed Rate from the date of payment thereof by Landlord. Without limiting any of Tenant's obligations hereunder, during the Lease Term Tenant, at its expense, shall obtain and keep in force an HVAC service contract and a roof maintenance program satisfactory to Landlord. Tenant hereby waives the benefit of any statute now or hereafter in effect which would otherwise afford Tenant the right to make repairs at Landlord's expense or to terminate this Lease because of Landlord's failure to keep the Premises in good condition, order and repair. Tenant specifically waives all rights it may have under Sections 1932(1), 1941 and 1942 of the California Civil Code, and any similar or successor statute or law. Notwithstanding anything to the contrary contained herein, Landlord shall exercise its rights under any guaranties or warranties relating to the original construction of the Premises if the need to make repairs arises due to a defect therein; provided, however, Landlord shall not have any liability or be required to expend any funds if such guaranties or warranties are not honored by the makers hereof.

  • Permitted Alterations Tenant shall not make or permit any Alterations without the prior written consent of Landlord (which consent shall not be unreasonably withheld, conditioned or delayed). Notwithstanding the foregoing, in no event shall any Alterations (i) affect the exterior of the Building or the outside areas of the Property or the Building (or be visible from adjoining sites), (ii) affect or penetrate any of the structural portions of the Building, including, but not limited to, the roof, (iii) require any change to the basic floor plan of the Premises, any change to the structural or mechanical components of the Premises, or any governmental approval or permit as a prerequisite to the construction thereof, (iv) interfere in any manner with the proper functioning of or Landlord’s access to any mechanical, electrical, plumbing or HVAC systems, facilities or equipment located in or serving the Building, or (v) diminish the value of the Premises. All Alterations shall be constructed pursuant to plans and specifications previously provided to and, when applicable, approved in writing by Landlord, shall be installed by a licensed contractor at Tenant’s sole expense in compliance with all Applicable Laws, and shall be accomplished in a good and workmanlike manner conforming in quality and design with the Premises existing as of the Commencement Date and in accordance with the provisions of Section 22.1 below. No Hazardous Materials, including, but not limited to, asbestos or asbestos-containing materials, shall be used by Tenant or Tenant’s Agents in the construction or installation of any Alterations permitted hereunder. All Alterations made by Tenant shall be and become the property of Landlord upon the construction or installation thereof and shall not be deemed Tenant’s Personal Property; provided, however, that Landlord may, at its option and by notice delivered to Tenant at the time of Landlord’s approval, require that Tenant, upon the expiration or sooner termination of this Lease, at Tenant’s expense, remove any or all Alterations and return the Premises to its condition as of the Commencement Date, normal wear and tear excepted. Notwithstanding any other provisions of this Lease to the contrary, Tenant shall be solely responsible for the maintenance, repair and replacement of any and all Alterations made by or for the benefit of Tenant (including, without limitation, by Landlord for the benefit of Tenant). In addition, Tenant shall be responsible for the payment of any increase in Real Property Taxes that are attributable to any Alterations, which payment shall be made by Tenant to Landlord within ten (10) days following Landlord’s written demand therefor from time to time. Notwithstanding anything to the contrary in this Section 8.1, Tenant, without Landlord’s consent, may make minor Alterations to the Premises which do not affect the Building’s structure or operating systems and that do not cost more than $50,000.00 per project; provided however, Tenant shall provide notice no less than ten (10) business days’ notice of such Alterations.

  • Installation Tenant may install and use Tenant's Lines and make connections and disconnections at the terminal blocks as described above, provided Tenant shall: (i) obtain Landlord's prior written approval of all aspects thereof, (ii) use an experienced and qualified contractor designated or approved in writing in advance by Landlord (whom Landlord may require to enter an access and indemnity agreement on Landlord's then standard form of agreement therefor), (iii) comply with such inside wire standards as Landlord may adopt from time to time, and all other provisions of this Lease, including Paragraph 8 respecting alterations, and the Building rules respecting access to the wire closets, (iv) not install Lines in the same sleeve, chaseway or other enclosure in close proximity with electrical wire, and not install PVC-coated Lines under any circumstances, (v) thoroughly test any riser Lines to which Tenant intends to connect any Lines to ensure that such riser Lines are available and are not then connected to or used for telephone, data transmission or any other purpose by any other party (whether or not Landlord has previously approved such connections), and not connect to any such unavailable or connected riser Lines, and (vi) not connect any equipment to the Lines which may create an electromagnetic field exceeding the normal insulation ratings of ordinary twisted pair riser cable or cause radiation higher than normal background radiation, unless the Lines therefor (including riser Lines) are appropriately insulated to prevent such excessive electromagnetic fields or radiation (and such insulation shall not be provided by the use of additional unused twisted pair Lines). As a condition to permitting installation of new Lines, Landlord may require that Tenant remove any existing Lines located in or serving the Premises.

  • Removal of Alterations If Tenant fails to remove by the expiration or earlier termination of this Lease all of its personal property, or any Alterations identified by Landlord for removal, Landlord may, at its option, treat such failure as a hold-over pursuant to Subparagraph 11(b) above, and/or Landlord may (without liability to Tenant for loss thereof) treat such personal property and/or Alterations as abandoned and, at Tenant's sole cost and expense, and in addition to Landlord's other rights and remedies under this Lease, at law or in equity: (a) remove and store such items; and/or (b) upon ten (10) days prior notice to Tenant, sell, discard or otherwise dispose of all or any such items at private or public sale for such price as Landlord may obtain or by other commercially reasonable means. Tenant shall be liable for all costs of disposition of Tenant's abandoned property and Landlord shall have no liability to Tenant with respect to any such abandoned property. Landlord agrees to apply the proceeds of any sale of any such property to any amounts due to Landlord under this Lease from Tenant (including Landlord's attorneys' fees and other costs incurred in the removal, storage and/or sale of such items), with any remainder to be paid to Tenant.

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “

  • Additions and Alterations 12 ARTICLE 9

  • Removal of Improvements Except as otherwise expressly agreed to by Lessor and Lessee, Lessee shall have the right to remove all Tank Farm Assets and other improvements, fixtures, equipment, materials, supplies and personal property installed by Lessee from the Premises upon the termination or expiration of this Lease, but in no event later than the date that is 120 days following the expiration or termination of this Lease (the “Removal Date”) and Lessor shall provide Lessee with access to the Premises at reasonable times until expiration of the Removal Date for the purpose of removing such items. Lessee shall provide Lessor with written notice of its election to remove the Tank Farm Assets and other improvements, fixtures, equipment, materials, supplies and personal property from the Premises at least 60 days prior to the expiration of the Lease. If Lessee elects to remove the Tank Farm Assets and Improvements from the Premises after such removal Lessee shall restore any damage to the Premises and clean the Premises so as to eliminate therefrom any accumulation (other than any de minimis and non-hazardous accumulation) of foreign substances, materials, or debris, in addition to any Environmental Cleanup that may be required under Article 10. Lessee shall pay Lessor pro rata Rent (based on the amount of Rent applicable during the last month prior to the termination or expiration) through the date of Lessee’s complete removal of all such items. During the period of such removal and clean-up, all terms and conditions of this Lease, including, the indemnity and insurance provisions shall continue in full force and effect. If Lessee elects not to remove all of the Tank Farm Assets and Improvements from the Premises on or before the Removal Date, and provided that such facilities are in good working condition at the expiration of the Term (ordinary wear and tear excepted) then, such Tank Farm Assets and Improvements shall be deemed permanently abandoned to Lessor’s sole ownership, and Lessor may remove and dispose of such facilities in any manner which Lessor may deem appropriate, without any liability whatsoever to Lessee. If Lessee elects not to remove all of the Tank Farm Assets and Improvements from the Premises on or before the Removal Date and such facilities are not in good working condition at the expiration of the term (ordinary wear and tear excepted), or Lessee fails to so remove any or all of the Tank Farm Assets and Improvements from the Premises before the Removal Date, then, in addition to all rights and remedies available at law or in equity, without any prior notice, Lessor may (but shall be under no obligation), at Lessor’s option, deem such Tank Farm Assets and Improvements to be permanently abandoned to Lessor’s sole ownership, and Lessor may remove and dispose of such facilities in any manner which Lessor may deem appropriate, without any liability whatsoever to Lessee, and Lessee shall reimburse Lessor for all costs of such removal and disposal upon demand from Lessor. If requested by Lessor, Lessee shall execute any and all documents necessary to evidence that title to the Tank Farm Assets and Improvements that Lessee does not remove by the Removal Date is in Lessor and to extinguish and remove any cloud or potential cloud on the title to the Premises and/or such facilities created by Lessee.

  • Alterations, Modifications and Additions The Grantor will make (or cause to be made) such alterations and modifications in and additions to such Airframe and each such Engine as may be required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which such Aircraft may then be registered; provided that the Grantor may, in good faith, contest the validity or application of any such requirement in any manner that does not involve any material risk of sale, loss or forfeiture of such Aircraft and does not adversely affect the Trustee’s interest in the Aircraft Collateral. In addition, the Grantor (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to such Airframe or any such Engine as the Grantor may deem desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts, provided that no such alteration, modification or addition shall materially diminish the value or utility of such Airframe or such Engine below its value or utility, immediately prior to such alteration, modification or addition, assuming that such Airframe or such Engine was then in the condition required to be maintained by the terms of this Aircraft Security Agreement, except that the value (but not the utility) of such Airframe or such Engine may be reduced by the value of any such Parts that shall have been removed that the Grantor deems obsolete or no longer suitable or appropriate for use on such Airframe or such Engine. All Parts incorporated or installed in or attached or added to such Airframe or any such Engine as the result of such alteration, modification or addition shall be free and clear of any Liens, other than Permitted Liens, and shall, without further act, be subject to the Lien of this Aircraft Security Agreement. Notwithstanding the foregoing, the Grantor (or any Permitted Lessee) may, at any time, remove any Part from such Airframe or any such Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to such Airframe or such Engine at the time of delivery thereof to the Grantor or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to such Airframe or such Engine pursuant to the first sentence of this Section 6.03(c) or Section 6.01(d) and (iii) can be removed from such Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Aircraft Security Agreement that such Airframe or such Engine would have had had such Part never been installed on such Airframe or such Engine. Upon the removal by the Grantor of any Part as permitted by this Section 6.03(c), such removed Part shall, without further act, be free and clear of the Lien of this Aircraft Security Agreement and of all rights and interests of the Trustee (and the other beneficiaries hereof) and shall no longer be deemed a Part hereunder. Upon request of the Grantor from time to time, the Trustee shall execute and deliver to the Grantor an appropriate instrument confirming the release of any such removed Part from the Lien of this Aircraft Security Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.