Inspection and Service Sample Clauses

Inspection and Service. SMO reserves the right to inspect equipment to be covered under a service agreement prior to acceptance.We do this to ensure that your equipment is working properly and so that both parties are aware of the equipment’s condition at the time of agreement acceptance. If upon inspection the equipment covered does not meet acceptable standards for coverage, all costs for parts & service rendered prior to the date of cancellation will be applied against the cost of the agreement. Any remaining credit balance, if any, will be refunded to the customer. Repairs required before agreement acceptance will be billed at the prevailing rates. Inspections (including flue pipe), tune-ups, and required service are subject to the accessibility of the equipment and parts from normal SMO supply sources. Inspections and annual tune-ups will only be performed Monday through Friday, between 8:00am and 4:30pm, except on holidays. SMO will not be responsible for tune-ups, inspection, or service not performed due to unavailability of customer
Sample 1Sample 2Sample 3See All (12)
AutoNDA by SimpleDocs
Inspection and Service. SMO reserves the right to inspect equipment to be covered under a service agreement prior to acceptance.We do this to ensure that your equipment is working properly and so that both parties are aware of the equipment’s condition at the time of agreement acceptance. If upon inspection the equipment covered does not meet acceptable standards for coverage, all costs for parts & service rendered prior to the date of cancellation will be applied against the cost of the agreement. Any remaining credit balance, if any, will be refunded to the customer. Repairs required before agreement acceptance will be billed at the prevailing rates. Inspections (including flue pipe), tune-ups, and required service are subject to the accessibility of the equipment and parts from normal SMO supply sources. Inspections and annual tune-ups will only be performed Monday through Friday, between 8:00am and 4:30pm, except on holidays. SMO will not be responsible for tune-ups, inspection, or service not performed due to unavailability of customer to schedule work. Customer requests to perform heating tune-ups and air conditioning tune-ups on separate days shall be subject to an additional service charge. All services will be performed providing the safety of our technicians is not compromised.The condition and maintenance of the chimney and flue are the responsibility of the customer.
Sample 1Sample 2Sample 3See All (9)
Inspection and Service. Upon termination of Lease Agreement, Tenant agrees, before vacating premises, to employ at Tenant’s sole cost and expense, a licensed contractor to inspect service and write a written report on the systems referred to in “A” and “B” of this Paragraph. Landlord shall have the right to order such an inspection if Tenant fails to provide evidence of such inspection, and to follow the recommendations of such reports to charge the expense there of the Tenant.
Sample 1

Related to Inspection and Service

  • Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • INSPECTION AND REJECTION 8.1 Purchaser shall have the right to inspect and test Products at any time prior to shipment, and within a reasonable time after delivery to the Purchaser’s Destination. Products not inspected within a reasonable time after delivery shall be deemed accepted by Purchaser. The payment for Products shall in no way impair the right of Purchaser to reject nonconforming Products, or to avail itself of any other remedies to which it may be entitled. 8.2 If any of the Products are found at any time to be defective in material or workmanship, damaged, or otherwise not in conformity with the requirements of this Agreement or any applicable Purchase Order, as its exclusive remedy, Purchaser may at its option and at Vendor’s sole cost and expense, elect either to (i) return any damaged, non-conforming or defective Products to Vendor for correction or replacement, or (ii) require Vendor to inspect the Products and remove or replace damaged, non-conforming or defective Products with conforming Products. If Purchaser elects option (ii) in the preceding sentence and Vendor fails promptly to make the necessary inspection, removal and replacement, Purchaser, at its option, may inspect the Products and Vendor shall bear the cost thereof. Payment by Purchaser of any invoice shall not constitute acceptance of the Products covered by such invoice, and acceptance by Purchaser shall not relieve Vendor of its warranties or other obligations under this Agreement. 8.3 The provisions of this Article shall survive the expiration or termination of this Agreement.

  • Inspection and Verification The Collateral Agent and such Persons as the Collateral Agent may reasonably designate shall have the right, subject to compliance with Section 5.09 of the Credit Agreement, to inspect the Collateral, all records related thereto (and to make extracts and copies from such records) and the premises upon which any of the Collateral is located, to discuss the Grantors' affairs with the officers of the Grantors and their independent accountants and to verify under reasonable procedures the validity, amount, quality, quantity, value, condition and status of, or any other matter relating to, the Collateral, including, in the case of Accounts or Collateral in the possession of any third person, by contacting Account Debtors or the third person possessing such Collateral for the purpose of making such a verification; provided, however, that representatives of the Grantors shall be entitled to -------- ------- participate in such discussions. The Collateral Agent shall have the absolute right to share any information it gains from such inspection or verification with any Secured Party.

  • EVALUATION AND MONITORING The ORGANIZATION agrees to maintain books, records and other documents and evidence, and to use accounting procedures and practices that sufficiently and properly support the complete performance of and the full compliance with this Agreement. The ORGANIZATION will retain these supporting books, records, documents and other materials for at least three (3) calendar years following the year in which the Agreement expires. The COUNTY and/or the State Auditor and any of their representatives shall have full and complete access to these books, records and other documents and evidence retained by the ORGANIZATION respecting all matters covered in and under this Agreement, and shall have the right to examine such during normal business hours as often as the COUNTY and/or the State Auditor may deem necessary. Such representatives shall be permitted to audit, examine and make excerpts or transcripts from such records, and to make audits of all contracts, invoices, materials, and records of matters covered by this Agreement. These access and examination rights shall last for three calendar years following the year in which the Agreement expires. The COUNTY intends without guarantee for its agents to use reasonable security procedures and protections to assure that related records and documents provided by the ORGANIZATION are not erroneously disclosed to third parties. The COUNTY will, however, disclose or make this material available to those authorized by/in the above paragraph or permitted under the provisions of Chapter 42.56 RCW without notice to the ORGANIZATION. The ORGANIZATION shall cooperate with and freely participate in any other monitoring or evaluation activities pertinent to this Agreement that the COUNTY finds needing to be conducted.

  • REGION AND SERVICES The Contractor’s Region is: Region 1. The Contractor’s IDIQ construction service type is: General Construction. The Contractor has agreed to perform work outside the Region.

  • Audit, Inspection and Visitation The Adviser shall make available to the Trust during regular business hours all records and other data created and maintained pursuant to the foregoing provisions of this Agreement for reasonable audit and inspection by the Trust or any regulatory agency having authority over the Trust.

  • Inspections and Tests 26.1 The Supplier shall at its own expense and at no cost to the Procuring Entity carry out all such tests and/or inspections of the Goods and Related Services as are specified in the SCC. 26.2 The inspections and tests may be conducted on the premises of the Supplier or its Subcontractor, at point of delivery, and/or at the Goods' final destination, or in another place in Kenya as specified in the SCC. Subject to GCC Sub-Clause 26.3, if conducted on the premises of the Supplier or its Subcontractor, all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity. 26.3 The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in GCC Sub-Clause 26.2, provided that the Procuring Entity bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all travelling and board and lodging expenses. 26.4 Whenever the Supplier is ready to carry out any such test and inspection, it shall give a reasonable advance notice, including the place and time, to the Procuring Entity. The Supplier shall obtain from any relevant third party or manufacturer any necessary permission or consent to enable the Procuring Entity or its designated representative to attend the test and/or inspection. 26.5 The Procuring Entity may require the Supplier to carry out any test and/or inspection not required by the Contract but deemed necessary to verify that the characteristics and performance of the Goods comply with the technical specifications codes and standards under the Contract, provided that the Supplier's reasonable costs and expenses incurred in the carrying out of such test and/or inspection shall be added to the Contract Price. Further, if such test and/or inspection impedes the progress of manufacturing and/or the Supplier's performance of its other obligations under the Contract, due allowance will be made in respect of the Delivery Dates and Completion Dates and the other obligations so affected. 26.6 The Supplier shall provide the Procuring Entity with a report of the results of any such test and/or inspection. 26.7 The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Sub- Clause 26.4. 26.8 The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, nor the issue of any report pursuant to GCC Sub-Clause 26.6, shall release the Supplier from any warranties or other obligations under the Contract.

  • TESTING AND INSPECTION 6.1 Pre-Commercial Operation Date Testing and Modifications.

  • Books and Records; Inspection and Examination The Borrower will keep accurate books of record and account for itself pertaining to the Collateral and pertaining to the Borrower's business and financial condition and such other matters as the Lender may from time to time request in which true and complete entries will be made in accordance with GAAP and, upon the Lender's request, will permit any officer, employee, attorney or accountant for the Lender to audit, review, make extracts from or copy any and all corporate and financial books and records of the Borrower at all times during ordinary business hours, to send and discuss with account debtors and other obligors requests for verification of amounts owed to the Borrower, and to discuss the Borrower's affairs with any of its directors, officers, employees or agents. The Borrower will permit the Lender, or its employees, accountants, attorneys or agents, to examine and inspect any Collateral, other collateral covered by the Security Documents or any other property of the Borrower at any time during ordinary business hours.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!