Inspections of Manufacturing Facility Sample Clauses

Inspections of Manufacturing Facility. (a) Inspection by Codexis. Representatives of Codexis (i) shall upon Codexis’ request be permitted to review Arch’s quality assurance/quality control and Environmental, Health and Safety procedures; and (ii) may, during normal business hours and with reasonable advance notice, conduct a supplier audit of the Manufacturing Facility(ies); provided, that unless there is a material change to the operation of the Manufacturing Facility(ies) (such as introduction of new assets or products), such audit shall not extend beyond two (2) Business Days per facility and, unless deficiencies are discovered during any such audit, shall not be conducted more than once per calendar year at any particular Manufacturing Facility. Arch shall permit representatives of Codexis to inspect the Manufacturing Facility(ies) to verify that the Products are being manufactured and supplied in accordance with the applicable Specification, cGMP, the relevant terms of this Agreement and Applicable Law. Arch shall promptly remedy or cause the remedy of any deficiencies that may be noted in any such inspection.
Sample 1Sample 2Sample 3
Inspections of Manufacturing Facility. (a) Inspection by Codexis India. Representatives of Codexis India (i) shall upon Codexis India’s request be permitted to review Arch’s quality assurance/quality control and Environmental, Health and Safety procedures; and (ii) may, during normal business hours and with reasonable advance notice, conduct a supplier audit of the Manufacturing Facility(ies); provided, that unless there is a material change to the operation of the Manufacturing Facility(ies) (such as introduction of new assets or products), such audit shall not extend beyond two (2) Business Days per facility and, unless deficiencies are discovered during any such audit, shall not be conducted more than once per calendar year at any particular Manufacturing Facility. Arch shall permit representatives of Codexis India to inspect the Manufacturing Facility(ies) to verify that the Products are being manufactured and supplied in accordance with the applicable Specification, cGMP, the relevant terms of this Agreement and Applicable Law. Arch shall promptly remedy or cause the remedy of any deficiencies that may be noted in any such inspection. (b) Inspections by Third Party Customers of Codexis India. Representatives of Codexis India’s Third Party customers for Products may, during normal business hours and with reasonable advance notice, conduct a supplier audit of the applicable Manufacturing Facility(ies); provided, that each such audit shall not extend beyond two (2) Business Days per facility and, unless deficiencies are discovered during any such audit, shall not be conducted more than once by any particular Third Party customer at any particular Manufacturing Facility in a particular calendar year. Arch shall permit such representatives to inspect the applicable Manufacturing Facility to verify that the Products are being manufactured and supplied in accordance with the applicable Product Specification, cGMP, Environmental, Health and Safety standards and Applicable Law. Arch shall promptly remedy or cause the remedy of any deficiencies that may be noted in any such inspection.
Sample 1
Inspections of Manufacturing Facility 
Sample 1Sample 2Sample 3

Related to Inspections of Manufacturing Facility

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner. 2.1.2 The NYISO and Connecting Transmission Owner shall each provide the Interconnection Customer written acknowledgment that it has received the Interconnection Customer’s written test report. Such written acknowledgment shall not be deemed to be or construed as any representation, assurance, guarantee, or warranty by the NYISO or Connecting Transmission Owner of the safety, durability, suitability, or reliability of the Small Generating Facility or any associated control, protective, and safety devices owned or controlled by the Interconnection Customer or the quality of power produced by the Small Generating Facility.

  • Solicitations for Subcontractors, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the contractor for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the contractor of the contractor's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin, sex, age, and disability/handicap.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • Solicitations for Subcontracts, Including Procurement of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Local Government for work to be performed under a subcontract, including procurement of materials or leases of equipment, each potential subcontractor or supplier will be notified by the Local Government of the Local Government’s obligations under this Agreement and the Acts and Regulations relative to Nondiscrimination on the grounds of race, color, or national origin.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Solicitations for Subcontracts, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Engineer for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the Engineer of the Engineer's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Equipment and Materials CONTRACTOR shall provide all equipment, materials, and supplies necessary for the performance on the Agreement except:

  • Manufacturing Services Patheon will perform the Manufacturing Services for Products to be distributed and sold by Client in the Territory for the fees specified in Schedules B and C to the relevant Product Agreement. Schedule B to each Product Agreement sets forth a list of cost items that are included in the Price for Products; all cost items that are not included in this list are excluded from the Price and are subject to additional fees to be paid by Client. Patheon may amend the fees set out in Schedules B and C to a Product Agreement as set forth in Article 4. Patheon will perform the Manufacturing Services solely at the Manufacturing Site, unless otherwise agreed in writing by Client. If the parties agree that Patheon will supply, and Client will purchase, at least a specified minimum percentage of Client’s requirements for a Product under a Product Agreement (the “Required Percentage”), then the applicable Product Agreement will set forth the Required Percentage and the time period during which the obligation will apply (the “Required Period”). But this obligation (if any) will cease to apply to Client with respect to the Product if Patheon fails to remain in material compliance with its obligations under this Agreement or the applicable Product Agreement, or Patheon suspends performance under this Agreement or the applicable Product Agreement in connection with a Force Majeure Event or where Patheon is or will be prevented from supplying the Product as a result of the action of a Regulatory Authority. Subject to its obligation (if any) to purchase the Required Percentage of a Product during the Required Period, Client may, at any time, obtain Product from a third party or may, at any time, qualify a third party to perform Manufacturing Services for the Product. In performing the Manufacturing Services, Patheon and Client agree that: