LICENSE OF AUTHORIZED AREA Sample Clauses

LICENSE OF AUTHORIZED AREA. The Licensor hereby licenses the use by the Licensee of the Authorized Area during the License Period only for the use and purpose and upon the terms and conditions set forth in this Agreement and only for the hours of operation indicated herein and the Licensee hereby agrees to the use of the Authorized Area during the License Period only for the use and purpose and upon the terms and conditions set forth in this Agreement.
AutoNDA by SimpleDocs
LICENSE OF AUTHORIZED AREA. The Licensor hereby licenses the use by the License of the Authorized Area during the License Period only for the use and purpose and upon the terms and conditions set forth in this Agreement and only for the hours of operation indicated herein and Licensee hereby agrees tot he use of the Authorized Area during the License Period only for the use and purpose and upon the terms and conditions set forth in this Agreement. Licensee agrees to provide Licensor a thirty (30) foot space along the west exterior wall of Hall "C" to assist a Licensor any egress problems that may occur as a result of the construction of Hall "D".
LICENSE OF AUTHORIZED AREA. The Licensor hereby licenses the use by the Licensee of the Authorized Area during the License Period only for the purpose and use as identified in Section 1.4 and upon the terms and conditions set forth in this Agreement. This license and use of the space is subject to Licensors reservation and use/operation of some or all of those areas designated as remote concession/bar/popcorn service areas per Section 4.5. The Authorized Area shall be discussed by the Parties.

Related to LICENSE OF AUTHORIZED AREA

  • License of Intellectual Property Each Party (a “Licensor”) grants the other Party (a “Licensee”) the non-exclusive, royalty-free, paid-up, worldwide, irrevocable, right, during the term of this Agreement, to use the Licensor’s Intellectual Property solely for the purposes of this Agreement and to carry out the Party’s functions consistent with its responsibilities and authority as set forth in the enable legislation and regulations. Such licenses shall not give the Licensee any ownership interest in or rights to the Intellectual Property of the Licensor. Each Licensee agrees to abide by all third-party license and confidentiality restrictions or obligations applicable to the Licensor’s Intellectual Property of which the Licensor has notified the Licensee in writing.

  • Authorized Uses The Participating Institutions and the Authorized Users may make all use of the Licensed Materials as is consistent with the applicable law and with this Agreement, including but not limited to the following licensing conditions ("Authorized Uses"). In addition, the Licensed Materials may be used for purposes of research, education or other non-commercial use as particularly follows:

  • Publicity and Use of Trademarks or Service Marks 34.1 A Party, its Affiliates, and their respective contractors and Agents, shall not use the other Party’s trademarks, service marks, logos or other proprietary trade dress, in connection with the sale of products or services, or in any advertising, press releases, publicity matters or other promotional materials, unless the other Party has given its written consent for such use, which consent the other Party may grant or withhold in its sole discretion. 34.2 Neither Party may imply any direct or indirect affiliation with or sponsorship or endorsement of it or its services or products by the other Party. 34.3 Any violation of this Section 34 shall be considered a material breach of this Agreement.

  • Authorized Use The Student Data shared pursuant to the Service Agreement, including persistent unique identifiers, shall be used for no purpose other than the Services outlined in Exhibit A or stated in the Service Agreement and/or otherwise authorized under the statutes referred to herein this DPA.

  • License Type Your license to a Product will be under a Named User or CPU license type, as specified on an order. Each Named User license to a Product entitles a Named User to access and use that Product in one production environment and up to two non-production environments. Each CPU license to a Product entitles you to assign the Product to a single CPU in one production environment and up to two non-production environments, for use in support of an unspecified number of Named Users.

  • Use of Likeness As part of the consideration for this Housing Agreement, Resident authorizes Owner and its affiliates to make photographs and video recordings of Resident in community and resident amenity areas, and irrevocably grants Owner and its affiliates a royalty-free license to use Resident’s image and likeness for all lawful purposes, including promotional purposes in advertising, video, web, social media and other formats.

  • Country and Territory Names The country and territory names (including their IDN variants, where applicable) contained in the following internationally recognized lists shall be withheld from registration or allocated to Registry Operator at All Levels: the short form (in English) of all country and territory names contained on the ISO 3166-1 list, as updated from time to time, including the European Union, which is exceptionally reserved on the ISO 3166-1 list, and its scope extended in August 1999 to any application needing to represent the name European Union <xxxx://xxx.xxx.xxx/iso/support/country_codes/iso_3166_code_lists/iso-3166-1_decoding_table.htm>; the United Nations Group of Experts on Geographical Names, Technical Reference Manual for the Standardization of Geographical Names, Part III Names of Countries of the World; and the list of United Nations member states in 6 official United Nations languages prepared by the Working Group on Country Names of the United Nations Conference on the Standardization of Geographical Names; provided, that the reservation of specific country and territory names (including their IDN variants according to the registry operator IDN registration policy, where applicable) may be released to the extent that Registry Operator reaches agreement with the applicable government(s). Registry Operator must not activate such names in the DNS; provided, that Registry Operator may propose the release of these reservations, subject to review by ICANN’s Governmental Advisory Committee and approval by ICANN. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names that remain withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.

  • Sublicense to Use the Scudder Trademarks As exclusive licensee of the rights to use anx xxxxxcense the use of the "Scudder," "Scudder Investments" and "Scudder, Stevens & Clark, Inx." xxxdemaxxx (xxgether, the "Scuddex Xxxxx"), xxx xerexx xxant the Trust a nonexclusive right xxx xxxlicense to use (i) the "Scudder" name and mark as part of the Trust's name (the "Fund Namx"), xxd (ii) the Scudder Marks in connection with the Trust's investment products xxx xxxvices, in each case only for so long as this Agreement, any other investment management agreement between you or any organization which shall have succeeded to your business as investment manager ("your Successor") and the Trust, or any extension, renewal or amendment hereof or thereof remains in effect, and only for so long as you are a licensee of the Scudder Marks, provided however, that you agree to use your best xxxxxxx to maintain your license to use and sublicense the Scudder Marks. The Trust agrees that it shall have no right to suxxxxxxxe or assign rights to use the Scudder Marks, shall acquire no interest in the Scudder Marks othxx xxxx the rights granted herein, that all of txx Xxxxt's uses of the Scudder Marks shall inure to the benefit of Scudder Trust Company xx xxxer and licensor of the Scudder Marks (xxx "Xrademark Owner"), and that the Trust shall nxx xxxxlenge the validity of the Scudder Marks or the Trademark Owner's ownership thereof. The Truxx xxxxher agrees that all services and products it offers in connection with the Scudder Marks shall meet commercially reasonable standards of duaxxxx, xs may be determined by you or the Trademark Owner from time to time, provided that you acknowledge that the services and products the Trust rendered during the one-year period preceding the date of this Agreement are acceptable. At your reasonable request, the Trust shall cooperate with you and the Trademark Owner and shall execute and deliver any and all documents necessary to maintain and protect (including but not limited to in connection with any trademark infringement action) the Scudder Marks and/or enter the Trust as a registered user thereof. Xx xxch time as this Agreement or any other investment management agreement shall no longer be in effect between you (or your Successor) and the Trust, or you no longer are a licensee of the Scudder Marks, the Trust shall (to the extent that, and as soon ax, xx xawfully can) cease to use the Fund Name or any other name indicating that it is advised by, managed by or otherwise connected with you (or your Successor) or the Trademark Owner. In no event shall the Trust use the Scudder Marks or any other name or mark confusingly similar therexx (xxxluding, but not limited to, any name or mark that includes the name "Scudder") if this Agreement or any other investment advisory agrexxxxx xetween you (or your Successor) and the Fund is terminated.

  • License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.

  • Use of Intellectual Property The Adviser grants to the Sub-Adviser a sublicense to use the trademarks, service marks, logos, names, or any other proprietary designations of the Adviser (“AdvisorShares Marks”) on a non-exclusive basis. The Sub-Adviser will acquire no rights in the AdvisorShares Marks, and all goodwill of the AdvisorShares Marks shall inure to and remain with the Adviser. The Sub-Adviser agrees that neither it, nor any of its affiliates, will knowingly in any way refer directly or indirectly to its relationship with the Trust, the Fund(s), the Adviser or any of their respective affiliates or use AdvisorShares Marks in offering, marketing or other promotional materials without the prior express written consent of the Adviser, which approval will not be unreasonably withheld or delayed, except as required by rule, regulation or upon the request of a governmental authority. Notwithstanding the forgoing, the Sub-Adviser and its affiliates may, without obtaining the Adviser’s prior approval, refer directly or indirectly to its relationship with the Trust, the Fund(s), the Adviser or any of their respective affiliates and use AdvisorShares Marks in offering, marketing or other promotional materials provided that such materials were previously approved by the Adviser and remain in substantially the same form.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!