Common use of Loop Clause in Contracts

Loop. 45.1. Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. 45.1 Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. 45.2 At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. 45.2.1 Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. 45.2.2 Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.fifteen

Loop. 45.1. Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Oneinvolved. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Oneinvolved. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall will include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall will include simple metallic measurements only, performed by accessing the loop through the voice Switch. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) 3 minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) 3 minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx bill the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx bill the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq ILEC will provide CLEC access to Local Loops, Loops as defined in Part A including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq ILEC will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq ILEC to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq ILEC for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section section 42. 45.2.1. Basic Testing shall include simple metallic measurements only, performed by accessing the loop through the voice Switch. Basic Testing does not include cooperative or joint testing efforts that require EmbarqEmbarq ILEC’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq ILEC at CLEC’s expense. Embarq ILEC technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) 3 minutes, Embarq ILEC may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq ILEC at CLEC’s expense, when requested. Embarq ILEC technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) 3 minutes, Embarq ILEC may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq ILEC will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. 45.1 Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. 45.2 At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. 45.2.1 Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. 45.2.2 Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx bill the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.fifteen

Loop. 45.1. Embarq will provide CLEC access to Local Loops, Loops as defined in Part A including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section Section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section §54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section §42. 45.2.1. Basic Testing shall include simple metallic measurements only, performed by accessing the loop through the voice Switch. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx bill the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Oneinvolved. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx bill the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Oneinvolved. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 5453. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only only, at CLEC’s request and will be provided by Embarq charged at CLEC’s expensethe rates set out in Table One. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Oneinvolved. 45.2.3. Joint Testing is provided on maintenance activity only only, at CLEC’s request and will be provided by Embarq at CLEC’s expenseCLEC will be charged $25.00 per quarter hour. After completing the requested service activity, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activityTesting. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table One. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.three

Loop. 45.1. Embarq will provide CLEC access to Local Loops, Loops as defined in Part A including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall include simple metallic measurements only, performed by accessing the loop through the voice Switch. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq will provide CLEC access to Local Loops, Loops as defined in Part A including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section section 42. 45.2.1. Basic Testing shall include simple metallic measurements only, performed by accessing the loop through the voice Switch. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”).Testing”).‌ 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) 3 minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) 3 minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq will provide CLEC access to Local Loops, Loops as defined in Part A including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54.Error! Reference source not found.. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42.Error! Reference source not found.. 45.2.1. Basic Testing shall include simple metallic measurements only, performed by accessing the loop through the voice Switch. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Onetest. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end user’s side of the Demarcation Point.

Loop. 45.1. Embarq will provide CLEC access to Local Loops, including Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. The following section includes the terms and conditions for Copper Loops, DS1 Loops, DS3 Loops, Hybrid Loops, FTTC Loops and FTTH Loops. Terms and conditions for making any network modifications resulting from CLEC’s request for Local Loops are contained in Section 54. 45.2. At CLEC’s request, and if Technically Feasible, Embarq will test and report trouble on conditioned loops for all of the line’s features, functions, and capabilities, and will not CoastCom – ICRA: OR – Eff: 05/20/08 39 restrict its testing to voice-transmission only. Testing shall include Basic Testing and Cooperative Testing. Optional Cooperative Testing and Joint Testing are performed only at CLEC’s request. To the extent CLEC requests testing that would require Embarq to purchase new equipment, establish new procedures, or make systems modifications, CLEC will compensate Embarq for costs incurred to provide such testing. Request for additional testing must be submitted pursuant to the BFR Process in Section 42. 45.2.1. Basic Testing shall include simple metallic measurements only. Basic Testing does not include cooperative or joint testing efforts that require Embarq’s technician to work jointly with CLEC’s staff (“Cooperative Testing” or “Joint Testing”). 45.2.2. Cooperative testing is provided on service order activity only and will be provided by Embarq at CLEC’s expense. Embarq technicians will try to contact CLEC’s representative at the conclusion of installation. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx bill the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Oneinvolved. 45.2.3. Joint Testing is provided on maintenance activity only and will be provided by Embarq at CLEC’s expense, when requested. Embarq technicians will try to contact CLEC’s representative to initiate Joint Testing after completing the requested activity. If the CLEC does not respond within three (3) minutes, Embarq may, in its sole discretion, continue its attempts to contact the CLEC’s representative, and xxxx bill the CLEC in increments of fifteen (15) minutes for the technician’s time for so long as such efforts continue, or Embarq may abandon the test and CLEC will be charged for the test and any additional technician time involved (beyond the initial 3 minutes) at the rates set out in Table Oneinvolved. Loops involving multiplexing prohibit the reading of a short. 45.2.4. Embarq will charge CLEC at the rates set out on Table One, when the location of the trouble on a CLEC-reported ticket is determined to be in CLEC’s network or on the CLEC end end-user’s side of the Demarcation Point.