Common use of Materials, Machinery, Equipment, and Tools Clause in Contracts

Materials, Machinery, Equipment, and Tools. The SUPPLIER shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Site. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIER. The SUPPLIER must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Siteworkplace. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIER. The SUPPLIER must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Contractor shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Siteworkplace. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S Contractor 's machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIERContractor. The SUPPLIER Contractor must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Contractor shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Site. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S Contractor 's machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIERContractor. The SUPPLIER Contractor must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Contractor shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Siteworkplace. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S Contractor’s machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation doc umentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIERContractor. The SUPPLIER Contractor must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Supplier shall provide and supply all the materials, machinery, equipment, equipment and tools required by that its personnel may require for the appropriate development and proper execution of its their work, which shall will allow them to carry out their work safely and with a safe and high quality worklevel of quality. All materials, machinery, equipment, equipment and tools shall require regular maintenance must be maintained and care in order properly cared for to withstand prevent deterioration due to the environmental conditions prevailing in at the Work Site. This treatment must procedure shall include coverage of protective material coversmaterial, insulation, insulation and others. In additionAdditionally, they must be equipped with have all the elements that ensure guarantee their safe use (lights, alarms, protective protection guards, etc.). The use of machinery, equipment, equipment and tools without these this protective devices equipment is prohibited. The SUPPLIER'S machinery, vehicles, vehicles and equipment of the Supplier shall be used only used by qualified and authorized authorised personnel. When appropriateapplicable, a certification, permit or license for use or driving license/permission must be presented. ENEL shall check review said documentation before the beginning starting and regularly periodically during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before prior to and during their use in order to verify that they comply with the applicable laws, regulations and/or safety and environmental laws, standards, and/or regulations. In the case that event that, during the inspection inspection, it is determined that they do not meet comply with the safety parameters, they the Supplier shall be immediately removed remove them from the workplace by the SUPPLIERwork site. The SUPPLIER Supplier must send to ENEL the information about on the materials, machinery, equipment, equipment and tools a to ENEL one week before the beginning of their use, which starting to use it and said use must be approved authorised by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Supplier shall provide and supply all the materials, machinery, equipment, equipment and tools required by that its personnel may require for the appropriate development and proper execution of its their work, which shall will allow them to carry out their work safely and with a safe and high quality worklevel of quality. All materials, machinery, equipment, equipment and tools shall require regular maintenance must be maintained and taken care in order of to withstand resist deterioration due to the environmental conditions prevailing in the SiteWorksite. This treatment must procedure shall include coverage of protective material coversmaterial, insulation, insulation and others. In additionAdditionally, they must be equipped with have all the elements that ensure guarantee their safe use (lights, alarms, protective protection guards, etc.). The use of machinery, equipment, equipment and tools without these this protective devices equipment is prohibited. The SUPPLIER'S machinery, vehicles, vehicles and equipment of the Supplier shall be used only used by qualified and authorized authorised personnel. When appropriateapplicable, a certification, permit or license for use or driving license/permission must be presented. ENEL shall check review said documentation before starting the beginning visit and regularly periodically during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before prior to and during their use in order to verify that they comply with the applicable laws, regulations and/or safety and environmental laws, standards, and/or regulations. In the case event that during the inspection it is determined that they do not meet comply with the safety parameters, they the Supplier shall be immediately removed proceed with their immediate removal from the workplace by the SUPPLIERworksite. The SUPPLIER Supplier must send to ENEL the information about on the materials, machinery, equipment, equipment and tools to ENEL a week before the beginning of their use, which starting its use and said use must be approved authorised by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Contractor shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Site. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S Contractor's machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIERContractor. The SUPPLIER Contractor must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Supplier shall provide and supply all the materials, machinery, equipment, equipment and tools required by that its personnel may require for the appropriate development and proper execution of its their work, which shall will allow them to carry out their work safely and with a safe and high quality worklevel of quality. All materials, machinery, equipment, equipment and tools shall require regular maintenance must be maintained and care in order properly cared for to withstand resist deterioration due to the environmental conditions prevailing in the SiteWorksite. This treatment must procedure shall include coverage of protective material coversmaterial, insulation, insulation and others. In additionAdditionally, they must be equipped with have all the elements that ensure guarantee their safe use (lights, alarms, protective protection guards, etc.). The use of machinery, equipment, equipment and tools without these this protective devices equipment is prohibited. The SUPPLIER'S machinery, vehicles, vehicles and equipment of the Supplier shall be used only used by qualified and authorized authorised personnel. When appropriateapplicabl e, a certification, permit or license for use or driving license/permission must be presented. ENEL shall check review said documentation before starting the beginning visit and regularly periodically during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before prior to and during their use in order to verify that they comply with the applicable laws, regulations and/or safety and environmental laws, standards, and/or regulations. In the case event that during the inspection it is determined that they do not meet comply with the safety parameters, they the Supplier shall be immediately removed proceed with their immediate removal from the workplace by the SUPPLIERworksite. The SUPPLIER Supplier must send to ENEL the information about on the materials, machinery, equipment, equipment and tools to ENEL a week before the beginning of their use, which starting its use and said use must be approved authorised by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Supplier shall provide and supply all the materials, machinery, equipment, equipment and tools required by that its personnel may require for the appropriate development and proper execution of its their work, which shall will allow them to carry out their work safely and with a safe and high quality worklevel of quality. All materials, machinery, equipment, equipment and tools shall require regular maintenance must be maintained and taken care in order of to withstand resist deterioration due to the environmental conditions condi tions prevailing in the SiteWorksite. This treatment must procedure shall include coverage of protective material coversmaterial, insulation, insulation and others. In additionAdditionally, they must be equipped with have all the elements that ensure guarantee their safe use (lights, alarms, protective protection guards, etc.). The use of machinery, equipment, equipment and tools without these this protective devices equipment is prohibited. The SUPPLIER'S machinery, vehicles, vehicles and equipment of the Supplier shall be used only used by qualified and authorized authorised personnel. When appropriateapplicable, a certification, permit or license for use or driving license/permission must be presented. ENEL shall check review said documentation before starting the beginning visit and regularly periodically during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before prior to and during their use in order to verify that they comply with the applicable laws, regulations and/or safety and environmental laws, standards, and/or regulations. In the case event that during the inspection it is determined that they do not meet comply with the safety parameters, they the Supplier shall be immediately removed proceed with their immediate removal from the workplace by the SUPPLIERworksite. The SUPPLIER Supplier must send to ENEL the information about on the materials, machinery, equipment, equipment and tools to ENEL a week before the beginning of their use, which starting its use and said use must be approved authorised by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Contractor shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Site. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S Contractor’s machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIERContractor. The SUPPLIER Contractor must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Contractor shall supply all materials, machinery, equipment, and tools required by its personnel for the appropriate development and execution of its work, which shall allow them to carry out a safe and high quality work. All materials, machinery, equipment, and tools shall require regular maintenance and care in order to withstand deterioration due to the environmental conditions prevailing in the Siteworkplace. This treatment must include protective material covers, insulation, and others. In addition, they must be equipped with all the elements that ensure their safe use (lights, alarms, protective guards, etc.). The use of machinery, equipment, and tools without these protective devices is prohibited. The SUPPLIER'S Contractor's machinery, vehicles, and equipment shall be only used by qualified and authorized personnel. When appropriate, certification, use or driving license/permission must be presented. ENEL shall check said documentation before the beginning and regularly during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before and during their use in order to verify that they comply with the applicable safety and environmental laws, standards, and/or regulations. In the case that during the inspection it is determined that they do not meet the safety parameters, they shall be immediately removed from the workplace by the SUPPLIERContractor. The SUPPLIER Contractor must send to ENEL the information about the materials, machinery, equipment, and tools a week before the beginning of their use, which must be approved by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Supplier shall provide and supply all the materials, machinery, equipment, equipment and tools required by that its personnel may require for the appropriate development and proper execution of its their work, which shall will allow them to carry out their work safely and with a safe and high quality worklevel of quality. All materials, machinery, equipment, equipment and tools shall require regular maintenance must be maintained and care in order properly cared for to withstand resist deterioration due to the environmental conditions prevailing in the SiteWorksite. This treatment must procedure shall include coverage of protective material coversmaterial, insulation, insulation and others. In additionAdditionally, they must be equipped with have all the elements that ensure guarantee their safe use (lights, alarms, protective protection guards, etc.). The use of machinery, equipment, equipment and tools without these this protective devices equipment is prohibited. The SUPPLIER'S machinery, vehicles, vehicles and equipment of the Supplier shall be used only used by qualified and authorized authorised personnel. When appropriateapplicable, a certification, permit or license for use or driving license/permission must be presented. ENEL shall check review said documentation before starting the beginning visit and regularly periodically during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before prior to and during their use in order to verify that they comply with the applicable laws, regulations and/or safety and environmental laws, standards, and/or regulations. In the case event that during the inspection it is determined that they do not meet comply with the safety parameters, they the Supplier shall be immediately removed proceed with their immediate removal from the workplace by the SUPPLIERworksite. The SUPPLIER Supplier must send to ENEL the information about on the materials, machinery, equipment, equipment and tools to ENEL a week before the beginning of their use, which starting its use and said use must be approved authorised by ENEL.

Materials, Machinery, Equipment, and Tools. The SUPPLIER Supplier shall provide and supply all the materials, machinery, equipment, equipment and tools required by that its personnel may require for the appropriate development and proper execution of its their work, which shall will allow them to carry out their work safely and with a safe and high quality worklevel of quality. All materials, machinery, equipment, equipment and tools shall require regular maintenance must be maintained and taken care in order of to withstand prevent deterioration due to the environmental conditions prevailing in at the Work Site. This treatment must procedure shall include coverage of protective material coversmaterial, insulation, insulation and others. In additionAdditionally, they must be equipped with have all the elements that ensure guarantee their safe use (lights, alarms, protective protection guards, etc.). The use of machinery, equipment, equipment and tools without these this protective devices equipment is prohibited. The SUPPLIER'S machinery, vehicles, vehicles and equipment of the Supplier shall be used only used by qualified and authorized authorised personnel. When appropriateapplicable, a certification, permit or license for use or driving license/permission must be presented. ENEL shall check review said documentation before the beginning starting and regularly periodically during the activities. All the elements described in this subsection shall be subject to inspection by ENEL before prior to and during their use in order to verify that they comply with the applicable laws, regulations and/or safety and environmental laws, standards, and/or regulations. In the case that event that, during the inspection inspection, it is determined that they do not meet comply with the safety parameters, they the Supplier shall be immediately removed remove them from the workplace by the SUPPLIERwork site. The SUPPLIER Supplier must send to ENEL the information about on the materials, machinery, equipment, equipment and tools a to ENEL one week before the beginning of their use, which starting to use it and said use must be approved authorised by ENEL.