Common use of Measurement Accuracy Verification Clause in Contracts

Measurement Accuracy Verification. (a) Gatherer shall calibrate meters as often as required, as determined by Gatherer in accordance with standard industry practices to reasonably assure accurate measurement, but at least once per year. (b) If, during any test of the Measuring Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate through each meter in excess of two percent of the adjusted flow rate (whether positive or negative and using the adjusted flow rate as the percent error equation denominator), then any previous recordings of such equipment shall be corrected to zero error for any period during which the error existed (and which is either known definitely or agreed to by Producer and Gatherer) and the total flow for the period redetermined in accordance with the provisions of Section 9.5. If the period of error condition cannot be determined or agreed upon between Producer and Gatherer, such correction shall be made over a period extending over the last one half of the time elapsed since the date of the prior test revealing the two percent error. (c) If, during any test of any Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate which does not exceed two percent of the adjusted flow rate, all prior recordings and data shall be considered to be accurate for quantity determination purpose.

Measurement Accuracy Verification. (a) Gatherer shall calibrate meters as often as required, as determined by Gatherer in accordance with standard industry practices to reasonably assure accurate measurement, but at least once per year. (b) If, during any test of the Measuring Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate through each meter in excess of two percent [***]% of the adjusted flow rate (whether positive or negative and using the adjusted flow rate as the percent error equation denominator), then any previous recordings of such equipment shall be corrected to zero error for any period during which the error existed (and which is either known definitely or agreed to by Producer and Gatherer) and the total flow for the period redetermined in accordance with the provisions of Section 9.5. If the period of error condition cannot be determined or agreed upon between Producer and Gatherer, such correction shall be made over a period extending over the last one half of the time elapsed since the date of the prior test revealing the two percent error[***]% error (but not to exceed [***] months). (c) If, during any test of any Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate which does not exceed two percent [***]% of the adjusted flow rate, all prior recordings and data shall be considered to be accurate for quantity determination purpose.

Measurement Accuracy Verification. (a) Gatherer shall calibrate meters as often as required, as determined by Gatherer in accordance with standard industry practices to reasonably assure accurate measurement, but at least once per year. (b) If, during any test of the Measuring Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate through each meter in excess of two percent of the adjusted flow rate (whether positive or negative and using the adjusted flow rate as the percent error equation denominator), then any previous recordings of such equipment shall be corrected to zero error for any period during which the error existed (and which period is either known definitely or agreed to by Producer and Gatherer) and the total flow for the period redetermined in accordance with the provisions of Section 9.5. If the period of error condition cannot be determined or agreed upon between Producer and Gatherer, such correction shall be made over a period extending over the last one half of the time elapsed since the date of the prior test revealing the two percent error. (c) If, during any test of any Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate which does not exceed two percent of the adjusted flow rate, all prior recordings and data shall be considered to be accurate for quantity determination purpose.

Measurement Accuracy Verification. (a) Gatherer Seller shall calibrate meters as often as required, as determined by Gatherer Seller in accordance with standard industry practices to reasonably assure accurate measurement, but at least once twice per year. (b) If, during any test of the Measuring Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate through each meter in excess of two percent of the adjusted flow rate (whether positive or negative and using the adjusted flow rate as the percent error equation denominator), then any previous recordings of such equipment shall be corrected to zero error for any period during which the error existed (and which is either known definitely or agreed to by Producer and GathererSeller) and the total flow for the period redetermined in accordance with the provisions of Section 9.5. If the period of error condition cannot be determined or agreed upon between Producer and GathererSeller, such correction shall be made over a period extending over the last one half of the time elapsed since the date of the prior test revealing the two percent error. (c) If, during any test of any Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate which does not exceed two percent of the adjusted flow rate, all prior recordings and data shall be considered to be accurate for quantity determination purpose.

Measurement Accuracy Verification. (a) Gatherer Seller shall calibrate meters as often as required, as determined by Gatherer Seller in accordance with standard industry practices to reasonably assure accurate measurement, but at least once twice per year. (b) If, during any test of the Measuring Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate through each meter in excess of two percent [***]% of the adjusted flow rate (whether positive or negative and using the adjusted flow rate as the percent error equation denominator), then any previous recordings of such equipment shall be corrected to zero error for any period during which the error existed (and which is either known definitely or agreed to by Producer and GathererSeller) and the total flow for the period redetermined in accordance with the provisions of Section 9.5. If the period of error condition cannot be determined or agreed upon between Producer and GathererSeller, such correction shall be made over a period extending over the last one half of the time elapsed since the date of the prior test revealing the two percent error[***]% error (but not to exceed [***] months). (c) If, during any test of any Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate which does not exceed two percent [***]% of the adjusted flow rate, all prior recordings and data shall be considered to be accurate for quantity determination purpose.

Measurement Accuracy Verification. (a) Gatherer shall calibrate meters as often as required, as determined by Gatherer in accordance with standard industry practices to reasonably assure accurate measurementmeasurement in accordance with ETRN OMP-102. Calibrations of meters will be made in the presence of representatives of Producer, but if Producer chooses to be represented. Orifice plate and tube inspection will be made at least once per yeareach meter calibration unless a facility shut-down is required, in which case the approval of both Parties shall be required. (b) If, during any test of the Measuring Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate through each meter run in excess of two percent 2% of the adjusted flow rate (whether positive or negative and using the adjusted flow rate as the percent error equation denominator), then any previous recordings of such equipment shall be corrected to zero error for any period during which the error existed (and which is either known definitely or agreed to by Producer and Gatherer) and the total flow for the period redetermined in accordance with the provisions of Section 9.511.7. If the period of error condition cannot be determined or agreed upon between Producer and Gatherer, such correction shall be made over a period extending over the last one half of the time elapsed since the date of the prior test revealing the two percent 2% error. (c) If, during any test of any Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated hourly flow rate which does not exceed two percent 2% of the adjusted flow rate, all prior recordings and electronic flow computer data shall be considered to be accurate for quantity determination purposepurposes.

Measurement Accuracy Verification. (a) Gatherer shall calibrate meters as often as required, as determined by Gatherer in accordance with standard industry practices to reasonably assure accurate measurement, but at least once twice per year. Calibrations of meters will be made in the presence of representatives of Producer, if Producer chooses to be represented. Orifice plate and tube inspection will be made at each meter calibration unless a facility shut-down is required, in which case the approval of both Parties shall be required. (b) If, during any test of the Measuring Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated flow rate through each meter run in excess of two percent [***] of the adjusted flow rate (whether positive or negative and using the adjusted flow rate as the percent error equation denominator), then any previous recordings of such equipment shall be corrected to zero error for any period during which the error existed (and which is either known definitely or agreed to by Producer and Gatherer) and the total flow for the period redetermined in accordance with the provisions of Section 9.511.7. If the period of error condition cannot be determined or agreed upon between Producer and Gatherer, such correction shall be made over a period extending over the last one half of the time elapsed since the date of the prior test revealing the two percent [***] error. (c) If, during any test of any Measurement Facilities, an adjustment or calibration error is found which results in an incremental adjustment to the calculated hourly flow rate which does not exceed two percent [***] of the adjusted flow rate, all prior recordings and electronic flow computer data shall be considered to be accurate for quantity determination purpose.