Common use of Metering Requirements Clause in Contracts

Metering Requirements. Electricity transferred to the transmission system shall be measured by electric watt-hour meters of a type approved by the New York State Public Service Commission. The meter and installation costs shall be borne by Interconnection Customer. The meters shall be maintained with the rules set forth in 16 NYCRR Part 92. Infrastructure security of New York State Transmission System equipment and operations and control hardware and software is essential to ensure day-to-day New York State. Transmission System reliability and operational security. The Commission will expect the NYISO, all Transmission Owners, all Interconnection Customers and all other Market Participants to comply with the recommendations offered by the President’s Critical Infrastructure Protection Board and, eventually, best practice recommendations from the electric reliability authority. All public utilities will be expected to meet basic standards for system infrastructure and operational security, including physical, operational, and cyber-security practices. New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Interconnection Customer: Standard Binghamton LLC c/o Standard General LP Attn: Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx Xxxx, XX 00000 Phone: (000) 000-0000 Fax: (000) 000-0000 and Standard Binghamton LLC Binghamton Cogen Plant 00 Xxxxxxx Xxxxxx Binghamton, NY 13905 Phone: (000) 000-0000 Fax: (000) 000-0000 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Standard Binghamton LLC c/o Standard General LP Attn: Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx Xxxx, XX 00000 Phone: (000) 000-0000 Fax: (000) 000-0000 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000

Metering Requirements. Electricity transferred to the transmission system shall be measured by electric watt-hour meters of a type approved by the New York State Public Service CommissionCommission of the State of New York. The meter and installation costs shall be borne by Interconnection Customer. Indeck Energy Services of Corinth, Inc. The meters shall be maintained with the rules set forth in 16 NYCRR Part 92. Infrastructure security of New York State Transmission System equipment and operations and control hardware and software is essential to ensure day-to-day New York State. State Transmission System reliability and operational security. The Commission will expect the NYISO, all Transmission Owners, all Interconnection Customers Developers and all other Market Participants to comply with the recommendations offered by the President’s Critical Infrastructure Protection Board and, eventually, best practice recommendations from the electric reliability authority. All public utilities will be expected to meet basic standards for system infrastructure and operational security, including physical, operational, and cyber-security practices. New York State Electric & Gas Corporation APPENDIX E – COMMERCIAL OPERATION DATE Developer commenced commercial operation of the Large Generating Facility on July 1, 1995, the Commercial Operation Date. [NYISO Address] [Connecting Transmission Owner Address] Re: Large Generating Facility Dear : On [Date] [Developer] has completed Trial Operation of Unit No. . This letter confirms that [Developer] commenced Commercial Operation of Unit No. at the Large Generating Facility, effective as of [Date plus one day]. Thank you. [To be supplied.] Attn: Manager - Programs/Projects Electric Transmission Services Vice President, System and Resource Planning 00 Xxxx Xxxxx XxxxxxxxxxXxxxxxxxx Rensselaer, XX 00000-0000 NY 12144 Phone: (000) 000-0000 FaxNew York Independent System Operator, Inc. Attn: Vice President, Operations 0000 Xxxxxx Xxxx Schenectady, NY 12303 Phone: (000) 000-0000 Interconnection Customer: Standard Binghamton LLC c/o Standard General LP Attn: Director, Transmission Commercial National Grid 00 Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx XxxxXxxx Xxxxxxx, XX 00000 Phone: (000) 000-0000 Fax[To be supplied.] Developer: (000) 000[To be supplied.] Indeck-0000 and Standard Binghamton LLC Binghamton Cogen Plant 00 Xxxxxxx Xxxxxx BinghamtonCorinth Limited Partnership Attn: Vice President of Operations Buffalo Grove, NY 13905 Illinois 60089 Phone: (000) 000-0000 FaxConnecting Transmission Owner: (000) 000-0000 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Xxxxxxx X. Xxxxx Director, Transmission Services Commercial National Grid 00 Xxxxxx Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Standard Binghamton LLC c/o Standard General LP Attn: Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx XxxxXxxxxxx, XX 00000 Phone: (000) 000-0000 Fax[To be supplied.] Developer: (000) 000Indeck-0000 Corinth Limited Partnership Attn: Vice President of Operations 000 Xxxxx Xxxxxxx Xxxxx Xxxx, Xxxxx 000 Xxxxxxx Xxxxx, Xxxxxxxx 00000 [To be supplied.] [To be supplied.] Attn: Vice President, System and Resource Planning 00 Xxxx Xxxxxxxxx New York State Electric & Gas Corporation Independent System Operator, Inc. Attn: Manager - Programs/Projects Electric Transmission Services 00 Vice President, Operations 0000 Xxxxxx Xxxx Xxxxx XxxxxxxxxxSchenectady, XX 00000-0000 NY 12303 Phone: (000) 000-0000 FaxDirector, Transmission Commercial National Grid 00 Xxxxxx Xxxx Xxxxxxx, XX 00000 Phone: (000) 000-00000000 [To be supplied.] Developer: [To be supplied.] Attn: Vice President of Operations 000 Xxxxx Xxxxxxx Xxxxx Xxxx, Xxxxx 000 Xxxxxxx Xxxxx, Xxxxxxxx 00000 Appendix G sets forth requirements and provisions specific to a wind generating plant.

Metering Requirements. Electricity transferred to the transmission system shall be measured by electric watt-hour meters of a type approved by the New York State Public Service CommissionCommission of the State of New York. The Costs for the repair or replacement of the meter and installation costs shall be borne by Interconnection CustomerDeveloper. The meters shall be maintained with the rules set forth in 16 NYCRR Part 92. Infrastructure security of New York State Transmission System equipment and operations and control hardware and software is essential to ensure day-to-day New York State. State Transmission System reliability and operational security. The Commission will expect the NYISO, all Transmission Owners, all Interconnection Customers Developers and all other Market Participants to comply with the recommendations offered by the President’s Critical Infrastructure Protection Board and, eventually, best practice recommendations from the electric reliability authority. All public utilities will be expected to meet basic standards for system infrastructure and operational security, including physical, operational, and cyber-security practices. New York State Electric & Gas Corporation Developer commenced Commercial Operation of the Generation Facility in 1986, the Commercial Operation Date. [NYISO Address] [Connecting Transmission Owner Address] Re: Large Generating Facility Dear : On [Date] [Developer] has completed Trial Operation of Unit No. . This letter confirms that [Developer] commenced Commercial Operation of Unit No. at the Large Generating Facility, effective as of [Date plus one day]. Thank you. [To be supplied.] Attn: Manager - Programs/Projects Electric Transmission Services Vice President, System and Resource Planning 00 Xxxx Xxxxx XxxxxxxxxxXxxxxxxxx Rensselaer, XX 00000-0000 NY 12144 Phone: (000) 000-0000 Fax: (000) 000-0000 Interconnection Customer: Standard Binghamton LLC c/o Standard General LP Attn: [To be supplied.] Director, Commercial Services National Grid 00 Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx XxxxXxxx Xxxxxxx, XX 00000 Phone: (000) 000-0000 Fax: (000) 000-0000 and Standard Binghamton LLC Binghamton Cogen Plant 00 Xxxxxxx Xxxxxx Binghamton[To be supplied.]Black River Hydroelectric, NY 13905 Phone: (000) 000-0000 Fax: (000) 000-0000 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Standard Binghamton LLC c/o Standard General LP Attn: Cube Hydro, LLC 0 Xxxxxxxx Xxxxx Xxxxxx, Xxxxx 0000 Xxxxxxxx XX 00000 [To be supplied.] Director, Commercial Services National Grid 00 Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx XxxxXxxx Xxxxxxx, XX 00000 Phone: (000) 000-0000 Fax[To be supplied.]Black River Hydroelectric, LLC c/o Cube Hydro Carolinas Xxxxx XX 00000 Phone: (000) -000-0000 New York State Electric & Gas Corporation [To be supplied.] Attn: Manager - Programs/Projects Electric Transmission Services Vice President, System and Resource Planning 00 Xxxx Xxxxx XxxxxxxxxxXxxxxxxxx Rensselaer, XX 00000-0000 NY 12144 Phone: (000) 000-0000 Fax[To be supplied.] Director, Commercial Services National Grid 00 Xxxxxx Xxxx Xxxxxxx, XX 00000 Phone: (000) 000-00000000 [To be supplied.]Black River Hydroelectric, LLC c/o Cube Hydro, LLC 0 Xxxxxxxx Xxxxx Xxxxxx, Xxxxx 0000 Xxxxxxxx XX 00000 In accordance with Article 10.5 of this Agreement, Developer shall be responsible for all reasonable expenses (“O&M Expenses”) associated with the operation, maintenance, repair and replacement of Connecting Transmission Owner’s Attachment Facilities, as such facilities are detailed in Appendix A. Developer shall have the option to pay such O&M Expenses either under the procedure described in Option 1 or in Option 2 below.

Metering Requirements. Electricity transferred to the transmission system shall be measured by electric watt-hour meters of a type approved by the New York State Public Service CommissionCommission of the State of New York. The Costs for repair or replacement of the meter and installation costs shall be borne by Interconnection CustomerDeveloper) . The meters shall be maintained with the rules set forth in 16 NYCRR Part 92. Infrastructure security of New York State Transmission System equipment and operations and control hardware and software is essential to ensure day-to-day New York State. State Transmission System reliability and operational security. The Commission will expect the NYISO, all Transmission Owners, all Interconnection Customers Developers and all other Market Participants to comply with the recommendations offered by the President’s Critical Infrastructure Protection Board and, eventually, best practice recommendations from the electric reliability authority. All public utilities will be expected to meet basic standards for system infrastructure and operational security, including physical, operational, and cyber-security practices. New York State Electric & Gas Corporation Developer commenced Commercial Operation of Generation Facility as of 05/05/1993, the Commercial Operation Date. [NYISO Address] [Connecting Transmission Owner Address] Re: Large Generating Facility Dear : On [Date] [Developer] has completed Trial Operation of Unit No. . This letter confirms that [Developer] commenced Commercial Operation of Unit No. at the Large Generating Facility, effective as of [Date plus one day]. Thank you. [To be supplied.] Attn: Manager - Programs/Projects Electric Transmission Services Vice President, System and Resource Planning 00 Xxxx Xxxxx XxxxxxxxxxXxxxxxxxx Rensselaer, XX 00000-0000 NY 12144 Phone: (000) 000-0000 Fax: (000) 000-0000 Interconnection Customer: Standard Binghamton LLC c/o Standard General LP Attn: [To be supplied.] Director, Commercial Services National Grid 00 Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx XxxxXxxx Xxxxxxx, XX 00000 Phone: (000) 000-0000 Fax[To be supplied.] Xxxxx Xxxx Facility Manager Covanta Niagara I, LLC 000 Xxxxxx Xxxx xx 00xx Xx. Xxxxxxx Xxxxx, XX 00000 Tel: (000) -000-0000 and Standard Binghamton LLC Binghamton Cogen Plant 00 Xxxxxxx Vice President & Deputy General Counsel 000 Xxxxx Xxxxxx BinghamtonXxxxxxxxxx, NY 13905 PhoneXX 00000 Tel: (000) -000-0000 Fax000 Xxxxx Xxxxxx, Xxxxxxxxxx, XX 00000 Tel: (000) -000-0000 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission [To be supplied.] Director, Commercial Services National Grid 00 Xxxxxx Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Standard Binghamton LLC c/o Standard General LP Attn: Xxxxxx Xxxxx, CFO 000 Xxxxxxx Xxxxxx 00xx Xxxxx Xxx XxxxXxxxxxx, XX 00000 Phone: (000) 000-0000 Fax[To be supplied.] Xxxxxx X. Xxxxx Facility Controller Covanta Niagara I, LLC 000 Xxxxxx Xxxx xx 00xx Xx. Xxxxxxx Xxxxx, XX 00000 Tel: (000) -000-0000 New York State Electric & Gas Corporation [To be supplied.] Attn: Manager - Programs/Projects Electric Transmission Services Vice President, System and Resource Planning 00 Xxxx Xxxxx XxxxxxxxxxXxxxxxxxx [To be supplied.] Director, Commercial Services National Grid 00 Xxxxxx Xxxx Xxxxxxx, XX 00000-0000 00000 Phone: (000) 000-0000 FaxXxxxx Xxxx Facility Manager Covanta Niagara I, LLC 000 Xxxxxx Xxxx xx 00xx Xx. Xxxxxxx Xxxxx, XX 00000 Tel: (000) -000-0000