NC/NCI CODES Sample Clauses

NC/NCI CODES xDSL Capable Loops 9.2.2.3.5.5.1 For Embedded Base xDSL Capable Loops, there may be instances when the NC code and/or NCI code associated with the CLEC customer’s xDSL Service [which has been working for the customer, irrespective of the NC/NCI code(s) associated with the customer’s xDSL Service] is not the same as the NC code and/or NCI code the Parties will use after the Final Implementation Date. When the need for a Repair occurs or Spectrum Management issues arise (e.g., after a Qwest network maintenance and modernization activity), however, CLEC may desire a change in the NC/NCI code(s) to conform it to the NC/NCI code(s) reflected in this Amendment. Qwest may not decline to proceed with Conditioning or with accepting and working to resolve trouble reports on the grounds that the NC/NCI code(s) are different or need changing for Embedded Base xDSL Capable Loops. 9.2.2.3.5.5.1.1 For Embedded Base xDSL Capable Loops, when submitting a trouble report, CLEC may request that Qwest change the NC code and/or NCI code to the applicable NC code and/or NCI code, such as described in Attachment 2. No CLEC service request, supplement, or supplemental request is needed to change the NC/NCI code(s) before CLEC submits a trouble report or before Qwest performs the Repair. After submitting a trouble report, CLEC will promptly submit a service request to change the NC/NCI codes to the xDSL Service actually deployed on the Embedded Base xDSL Capable Loop. Qwest will implement the change to the NC code and/or NCI code in Qwest’s records with no change to the circuit identifier. After processing of the service request, the circuit history in CEMR (or successor system) will reflect the change in NC/NCI code(s) to identify the new NC/NCI code(s). These NC/NCI code changes do not require project handling. 9.2.2.3.5.5.1.1.1 Regarding future changes to NC/NCI codes, see Section 9.2.2.3.5.5.3.1. 9.2.2.3.5.5.2 For Non-Embedded Base xDSL Capable Loops, the Parties agree to use the NC/NCI codes as described in Attachment 2 and Section 9.2.2.
AutoNDA by SimpleDocs

Related to NC/NCI CODES

  • OMNIBUS PROCUREMENT ACT OF 1992 It is the policy of New York State to maximize opportunities for the participation of New York State business enterprises, including minority and women-owned business enterprises as bidders, subcontractors and suppliers on its procurement contracts. Information on the availability of New York State subcontractors and suppliers is available from: NYS Department of Economic Development Division for Xxxxx Xxxxxxxx Xxxxxx, Xxx Xxxx 00000 Telephone: 000-000-0000 Fax: 000-000-0000 email: xxx@xxx.xx.xxx A directory of certified minority and women-owned business enterprises is available from: NYS Department of Economic Development Division of Minority and Women's Business Development 000 Xxxxx Xxxxxx Xxx Xxxx, XX 00000 212-803-2414 email: xxxxxxxxxxxxxxxxx@xxx.xx.xxx xxxxx://xx.xxxxxxxxxxxxxx.xxx/FrontEnd/VendorSearchPu blic.asp The Omnibus Procurement Act of 1992 requires that by signing this bid proposal or contract, as applicable, Contractors certify that whenever the total bid amount is greater than $1 million: (a) The Contractor has made reasonable efforts to encourage the participation of New York State Business Enterprises as suppliers and subcontractors, including certified minority and women-owned business enterprises, on this project, and has retained the documentation of these efforts to be provided upon request to the State; (b) The Contractor has complied with the Federal Equal Opportunity Act of 1972 (P.L. 92-261), as amended; (c) The Contractor agrees to make reasonable efforts to provide notification to New York State residents of employment opportunities on this project through listing any such positions with the Job Service Division of the New York State Department of Labor, or providing such notification in such manner as is consistent with existing collective bargaining contracts or agreements. The Contractor agrees to document these efforts and to provide said documentation to the State upon request; and (d) The Contractor acknowledges notice that the State may seek to obtain offset credits from foreign countries as a result of this contract and agrees to cooperate with the State in these efforts.

  • Technical Regulations 1. The rights and obligations of the Parties in respect of technical regulations, standards and conformity assessment shall be governed by the WTO Agreement on Technical Barriers to Trade. 2. The Parties shall strengthen their co-operation in the field of technical regulations, standards and conformity assessment, with a view to increasing the mutual understanding of their respective systems and facilitating access to their respective markets.

  • Fraud, Waste, and Abuse Contractor understands that HHS does not tolerate any type of fraud, waste, or abuse. Violations of law, agency policies, or standards of ethical conduct will be investigated, and appropriate actions will be taken. Pursuant to Texas Government Code, Section 321.022, if the administrative head of a department or entity that is subject to audit by the state auditor has reasonable cause to believe that money received from the state by the department or entity or by a client or contractor of the department or entity may have been lost, misappropriated, or misused, or that other fraudulent or unlawful conduct has occurred in relation to the operation of the department or entity, the administrative head shall report the reason and basis for the belief to the Texas State Auditor’s Office (SAO). All employees or contractors who have reasonable cause to believe that fraud, waste, or abuse has occurred (including misconduct by any HHS employee, Grantee officer, agent, employee, or subcontractor that would constitute fraud, waste, or abuse) are required to immediately report the questioned activity to the Health and Human Services Commission's Office of Inspector General. Contractor agrees to comply with all applicable laws, rules, regulations, and System Agency policies regarding fraud, waste, and abuse including, but not limited to, HHS Circular C-027. A report to the SAO must be made through one of the following avenues: ● SAO Toll Free Hotline: 1-800-TX-AUDIT ● SAO website: xxxx://xxx.xxxxx.xxxxx.xx.xx/ All reports made to the OIG must be made through one of the following avenues: ● OIG Toll Free Hotline 0-000-000-0000 ● OIG Website: XxxxxxXxxxxXxxxx.xxx ● Internal Affairs Email: XxxxxxxxXxxxxxxXxxxxxxx@xxxx.xxxxx.xx.xx ● OIG Hotline Email: XXXXxxxxXxxxxxx@xxxx.xxxxx.xx.xx. ● OIG Mailing Address: Office of Inspector General Attn: Fraud Hotline MC 1300 P.O. Box 85200 Austin, Texas 78708-5200

  • Xxxxxxx Xxxxxxx/Market Abuse Laws You acknowledge that, depending on your country or broker’s country, or the country in which Common Stock is listed, you may be subject to xxxxxxx xxxxxxx restrictions and/or market abuse laws in applicable jurisdictions, which may affect your ability to accept, acquire, sell or attempt to sell, or otherwise dispose of the shares of Common Stock, rights to shares of Common Stock (e.g., RSUs) or rights linked to the value of Common Stock, during such times as you are considered to have “inside information” regarding the Company (as defined by the laws or regulations in applicable jurisdictions, including the United States and your country). Local xxxxxxx xxxxxxx laws and regulations may prohibit the cancellation or amendment of orders you placed before possessing inside information. Furthermore, you may be prohibited from (i) disclosing insider information to any third party, including fellow employees and (ii) “tipping” third parties or causing them to otherwise buy or sell securities. Any restrictions under these laws or regulations are separate from and in addition to any restrictions that may be imposed under any applicable Company xxxxxxx xxxxxxx policy. You acknowledge that it is your responsibility to comply with any applicable restrictions, and you should speak to your personal advisor on this matter.

  • Federal Occupational Safety and Health Law Contractor represents and warrants that all articles and services shall meet or exceed the safety standards established and promulgated under the Federal Occupational Safety and Health Act of 1970, as amended (29 U.S.C. Chapter 15).

  • SAFETY REGULATIONS Equipment shall meet all State and Federal safety regulations.

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Defend Trade Secrets Act of 2016 Influencer acknowledges receipt of the following notice under 18 U.S.C § 1833(b)(1): “An individual will not be held criminally or civilly liable under any Federal or State trade secret law for the disclosure of a trade secret that (A) is made (i) in confidence to a Federal, State, or local government official, either directly or indirectly, or to an attorney; and (ii) solely for the purpose of reporting or investigating a suspected violation of law; or (B) is made in a complaint or other document filed in a lawsuit or other proceeding, if such filing is made under seal.”

  • Federal Regulations No part of the proceeds of any Loans will be used for "purchasing" or "carrying" any "margin stock" within the respective meanings of each of the quoted terms under Regulation U as now and from time to time hereafter in effect or for any purpose that violates the provisions of the Regulations of the Board. If requested by any Lender or the Administrative Agent, the Borrower will furnish to the Administrative Agent and each Lender a statement to the foregoing effect in conformity with the requirements of FR Form G-3 or FR Form U-1 referred to in Regulation U.

  • XXXXXXXX ANTI-KICKBACK ACT (a) The Sub-Recipient hereby agrees that, unless exempt under Federal law, it will incorporate or cause to be incorporated into any contract for construction work, or modification thereof, the following clause: i. Contractor. The contractor shall comply with 18 U.S.C. § 874, 40 U.S.C. § 3145, and the requirements of 29 C.F.R. pt. 3 as may be applicable, which are incorporated by reference into this contract.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!