Odor Control Technology Sample Clauses

Odor Control Technology. The Company shall ensure that odor from the Establishment is not released so as to constitute a nuisance to surrounding properties. The Company shall utilize a closed air system at the Establishment to not relive or introduce any outdoor air into the Establishment, nor allow any indoor air to escape. The Company shall employ odor control technology to remove odors and harmful volatile organic compounds (VOCs) from the Establishment. The Company shall ensure proper maintenance of all odor mitigation equipment to ensure maximum efficiency. In the event the Town receives three or more complaints from citizens representing separate households within a two-week period with respect to odor impacts in relation to the operation of the Establishment, the Company shall be required to meet with the Board of Selectmen, which may require that additional mitigation measures be taken, at the Company’s sole expense, to address the specific nature of the complaints. Nothing set forth herein, shall limit the authority or jurisdiction of the Building Inspector, Board of Health, or any other local enforcement official from enforcing applicable state laws and regulations, the Town’s local bylaws and regulations, or the conditions of the Special Permit and/or Site Plan Approval, with respect to odor violations.
AutoNDA by SimpleDocs
Odor Control Technology. The Company shall ensure that odor from the Establishment is not released so as to constitute a nuisance to surrounding properties. The Company shall utilize a closed air system at the Establishment to not relive or introduce any outdoor air into the Establishment, nor allow any indoor air to escape. The Company shall employ odor control technology to remove odors and harmful volatile organic compounds (VOCs) from the Establishment. The Company shall ensure proper maintenance of all odor mitigation equipment to ensure maximum efficiency. I would suggest the following revision, in addition, the Company shall conduct odor tests at the Establishment annually, or more frequently as requested by the Select Board, using an olfactometer to ensure that odors are being properly mitigated to the satisfaction of the Select Board. The Company shall provide the Town two (2) weeks written notice prior to said testing and upon the request of the Select Board, shall schedule the test to be conducted at a mutually agreeable date and time such that a designee of the Select Board may be present. In the event the Town receives five (5) or more complaints from citizens representing separate households within a two-week period with respect to odor impacts in relation to the operation of the Establishment, the Company shall be required to meet with the Select Board, which may require that additional mitigation measures be taken, at the Company’s sole expense, to address the specific nature of the complaints. Nothing set forth herein, shall limit the authority or jurisdiction of the Building Inspector, Board of Health, or any other local enforcement official from enforcing applicable state laws and regulations, the Town’s local bylaws and regulations, with respect to odor violations. T
Odor Control Technology. The Company shall ensure that odor from the Facility does not constitute a nuisance to surrounding properties. Subject to review and approval by the Planning Board as part of the Special Permit process, the Company shall, at a minimum, utilize a closed air system at the Facility to not relive or introduce any outdoor air into the Facility, nor allow any indoor air to escape. The Company shall utilize high capacity activated carbon filter fans to constantly recirculate the air and remove odors and harmful volatile organic compounds (VOCs) from the Facility. The Company shall ensure proper maintenance of all odor mitigation equipment and will replace carbon filters in a timely manner according to manufacturer recommendations to ensure maximum efficiency. The Planning Board may impose additional odor control requirements as part of the Special Permit.
Odor Control Technology. The Company shall ensure that odor from the Facility is not released so as to constitute a nuisance, in the opinion of the Town, to surrounding properties. At a minimum, the Company shall contain all cannabis related odors onsite through use of odor control technologies, including but not limited to appropriate ventilation and air handling equipment and odor resistant packaging. The Company shall ensure proper maintenance of all odor mitigation equipment to ensure maximum efficiency. If requested by the Town, the Company shall take additional, mitigation measures at the Company’s sole expense, including, but not limited to, having its odor prevention mechanism and technologies reviewed and assessed by Independent Engineer, to address the nature of the complaints to the satisfaction of the Town. Nothing set forth herein, shall limit the authority or jurisdiction of the Building Inspector, Board of Health, or any other local enforcement official from enforcing applicable state laws and regulations, the Town’s local bylaws and regulations, with respect to odor violations.

Related to Odor Control Technology

  • Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.

  • Background Technology List here prior contracts to assign Inventions that are now in existence between any other person or entity and you.

  • Research License Each Collaborator shall allow the other Collaborator to practice any of its Non- Subject Inventions for the purpose of performing the Cooperative Work. No license, express or implied, for commercial application(s) is granted to either Collaborator in Non-Subject Inventions by performing the Cooperative Work. For commercial application(s) of Non-Subject Inventions, a license must be obtained from the owner.

  • New Technology When new or updated technology is introduced into a workplace, it will be the responsibility of the employer to provide appropriate and, if necessary, ongoing training to the employees directly affected. Such training will include any health and safety implications or information that will enable employees to operate the equipment without discomfort and will help maintain their general well-being.

  • Technology Discoveries, innovations, Know-How and inventions, whether patentable or not, including computer software, recognized under U.S. law as intellectual creations to which rights of ownership accrue, including, but not limited to, patents, trade secrets, maskworks and copyrights developed under this Agreement.

  • Joint Technology The Parties agree that, in order to effectuate the provisions of Section 4.4.2, subject to any exclusive licenses granted hereunder, (a) the non-use provisions of this Article 9 shall not apply to each Party’s use of Joint Technology, and (b) each Party may disclose the Joint Technology to Third Parties who are under terms of confidentiality no less strict than those contained in this Agreement.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • Licensed Intellectual Property Section 3.17(h)(vi)...................................29

  • INTELLECTUAL PROPERTY RIGHTS - INVENTION AND PATENT RIGHTS A. General 1. NASA has determined that 51 U.S.C. § 20135(b) does not apply to this Agreement. Therefore, title to inventions made (conceived or first actually reduced to practice) under this Agreement remain with the respective inventing party(ies). No invention or patent rights are exchanged or granted under this Agreement, except as provided herein.

  • Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!