On ship/barge arrival Sample Clauses

Open Split View

Download

Share

Cite

On ship/barge arrival liters) additional ship’s composite samples (S3) shall be taken by Inspector:

Sample 1Sample 2

Save

Copy

Related to On ship/barge arrival

• Drop Shipped Off loaded by carrier to an Agency loading dock or designated area. There will be no charge to the ordering Agency for this delivery method.

• Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

• DELIVERY: FOB DESTINATION, INSIDE DELIVERY, FREIGHT PAID Whenever possible, contractors should give the ordering entities 3 working days prior notice of any deliveries and/or installations. Furniture contractors will not be responsible for the removal/moving of existing furnishings unless requested by the ordering entity. Contractors should verify site readiness prior to delivery. All deliveries will be made during normal working hours unless otherwise arranged with the ordering entity. Contractor will communicate any scheduling delays and/or changes immediately. Agencies will not be responsible for any freight damage, concealed or otherwise.

• Minimum Break between Shifts (a) Where it is necessary to work extended overtime, it is agreed that no Employee shall resume or continue to work without having had ten consecutive hours off duty between the termination of the overtime and the commencement of the Employee’s ordinary work on the next day or shift. (b) In the event that an Employee agrees to a request from site management to resume or continue to work without having had ten consecutive hours off duty, the Employee shall be paid at double ordinary time rates until the Employee is released from duty for such period.

• Delivery Location All Goods shall be delivered to the address specified in this Order (the "Delivery Location") during Buyer's normal business hours or as otherwise instructed by Buyer.

• One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Onvoy to Frontier, Onvoy, at Xxxxx’s own expense, shall: 2.3.1.1 provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA; and/or 2.3.1.2 obtain transport for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA (a) from a third party, or, (b) if Frontier offers such transport pursuant to a Frontier access Tariff, from Frontier. 2.3.2 For each Tandem or End Office One-Way Interconnection Trunk group for delivery of traffic from Onvoy to Frontier with a utilization level of less than sixty percent (60%) for final trunk groups and eighty-five percent (85%) for high usage trunk groups, unless the Parties agree otherwise, Onvoy will promptly submit ASRs to disconnect a sufficient number of Interconnection Trunks to attain a utilization level of approximately sixty percent (60%) for all final trunk groups and eighty-five percent (85%) for all high usage trunk groups. In the event Onvoy fails to submit an ASR to disconnect One-Way Interconnection Trunks as required by this Section, Frontier may disconnect the excess Interconnection Trunks or bill (and Onvoy shall pay) for the excess Interconnection Trunks at the rates set forth in the Pricing Attachment. 2.3.3 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Frontier to Onvoy, Frontier, at Frontier’s own expense, shall provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA.

• Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and PCS, PCS shall order from Verizon, and Verizon shall provide, the Two-Way Interconnection Trunks and the Entrance Facility, on which such Trunks will ride, and transport and multiplexing, in accordance with the rates, terms and conditions set forth in this Agreement and Verizon’s applicable Tariffs. 2.4.2 Prior to ordering any Two-Way Interconnection Trunks from Verizon, PCS shall meet with Verizon to conduct a joint planning meeting (“Joint Planning Meeting”). At that Joint Planning Meeting, each Party shall provide to the other Party originating Centium Call Second (Hundred Call Second) information, and the Parties shall mutually agree on the appropriate initial number of Two-Way End Office and Tandem Interconnection Trunks and the interface specifications at the Point of Interconnection (POI). Where the Parties have agreed to convert existing One-Way Interconnection Trunks to Two-Way Interconnection Trunks, at the Joint Planning Meeting, the Parties shall also mutually agree on the conversion process and project intervals for conversion of such One-Way Interconnection Trunks to Two-Way Interconnection Trunks. 2.4.3 Two-Way Interconnection Trunks shall be from a Verizon End Office or Tandem to a mutually agreed upon POI. 2.4.4 On a semi-annual basis, PCS shall submit a good faith forecast to Verizon of the number of End Office and Tandem Two-Way Interconnection Trunks that PCS anticipates Verizon will need to provide during the ensuing two (2) year period to carry traffic from PCS to Verizon and from Verizon to PCS. PCS’s trunk forecasts shall conform to the Verizon CLEC trunk forecasting guidelines as in effect at that time. 2.4.5 The Parties shall meet (telephonically or in person) from time to time, as needed, to review data on End Office and Tandem Two-Way Interconnection Trunks to determine the need for new trunk groups and to plan any necessary changes in the number of Two-Way Interconnection Trunks. 2.4.6 Two-Way Interconnection Trunks shall have SS7 Common Channel Signaling. The Parties agree to utilize B8ZS and Extended Super Frame (ESF) DS1 facilities, where available. 2.4.7 With respect to End Office Two-Way Interconnection Trunks, both Parties shall use an economic Centium Call Second (Hundred Call Second) equal to five (5). 2.4.8 Two-Way Interconnection Trunk groups that connect to a Verizon access Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.005 during the average time consistent busy hour. Two-Way Interconnection Trunk groups that connect to a Verizon local Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.01 during the average time consistent busy hour. Verizon and PCS shall engineer Two-Way Interconnection Trunks using BOC Notes on the LEC Networks SR-TSV-002275. 2.4.9 The performance standard for final Two-Way Interconnection Trunk groups shall be that no such Interconnection Trunk group will exceed its design blocking objective (B.005 or B.01, as applicable) for three

• Broken Shifts (a) An employee may agree to work broken shifts at any time; however an employee may be required to work broken shifts in the following circumstances: (i) in homecare; or (ii) in an emergency – including staff absence; or (iii) up to and including a 4 week continuous period for circumstances other than those covered by subclauses 14.4(a)(i) and (ii). (A) Where an employee has served a period of broken shifts in accordance with subclause (iii) the employee shall not be required to serve a further period on broken shifts until he or she has been off broken shifts for a period equivalent to the previous period on broken shifts. (b) A “broken shift” for the purposes of this sub-clause means a single shift worked by an employee that includes one or more breaks in excess of that provided for meal breaks, where the time between the commencement and termination of the broken shift shall not exceed 12 hours. (c) An employee must receive a minimum break of 10 hours between broken shifts rostered on successive days. (d) Where broken shifts are worked, employees shall receive the per shift allowance set out in Item 1 of Table 2 of Schedule B to this Agreement. (e) Payment for a broken shift shall be at ordinary pay with penalty rates and shift allowances in accordance with Clause 18 - Shift and Weekend Work, with shift allowances being determined by the commencing time of the broken shift. (f) All work performed beyond the maximum span of 12 hours for a broken shift will be paid at double ordinary pay.

• Vessels (A) All of the vessels described in the Registration Statement, the General Disclosure Package and the Prospectus, except for the Contracted Vessels (each of which a Subsidiary has contracted to acquire), are owned directly by Subsidiaries); each of the vessels listed on Schedule F-1 (the “Owned Vessels”) hereto has been duly registered as a vessel under the laws and regulations and flag of the jurisdiction set forth opposite its name on Schedule F-1 in the sole ownership of the Subsidiary set forth opposite its name on Schedule F-1 and no other action is necessary to establish and perfect such entity’s title to and interest in such vessel as against any charterer or third party; each such Subsidiary has good title to the applicable Owned Vessel, free and clear of all mortgages, pledges, liens, security interests and claims and all defects of the title of record except for those liens arising under Credit Facilities, each as disclosed in the Registration Statement, the General Disclosure Package and the Prospectus, and such other encumbrances which would not, in the aggregate, result in a Material Adverse Effect; and each such Owned Vessel is in good standing with respect to the payment of past and current taxes, fees and other amounts payable under the laws of the jurisdiction where it is registered as would affect its registry with the ship registry of such jurisdiction except for failures to be in good standing which would not, in the aggregate, result in a Material Adverse Effect. Upon delivery to and acceptance by the relevant Subsidiary under the MoAs and the Newbuilding Contracts described in the Registration Statement, General Disclosure Package and Prospectus, each of the vessels listed on Schedule F-2 hereto and specified as being under contract (the “Contracted Vessels”) for delivery to and acceptance by a Subsidiary will be duly registered as a vessel under the laws of the jurisdiction set forth opposite its name on Schedule F-2, or under the laws of a generally accepted shipping industry flag jurisdiction, in the sole ownership of the Subsidiary set forth opposite its name on Schedule F-2, on such date, each such Subsidiary will have good title to the applicable Contracted Vessel, free and clear of all mortgages, pledges, liens, security interests, claims and all defects of the title of record, except for any mortgages, pledges, liens, security interests or claims arising from any financing arrangement which the Company or Subsidiary may enter to finance the acquisition of the Contracted Vessel and except such encumbrances which would not, in the aggregate, result in a Material Adverse Effect; and each such Contracted Vessel will be in good standing with respect to the payment of past and current taxes, fees and other amounts payable under the laws of the jurisdiction where it is registered as would affect its registry with the ship registry of such jurisdiction. (B) Each Owned Vessel is, and the Company will use reasonable commercial efforts to ensure that each Contracted Vessel will be, operated in compliance with the rules, codes of practice, conventions, protocols, guidelines or similar requirements or restrictions imposed, published or promulgated by any Governmental Authority, classification society or insurer applicable to the respective vessel (collectively, “Maritime Guidelines”) and all applicable international, national, state and local conventions, laws, regulations, orders, Governmental Licenses and other requirements (including, without limitation, all Environmental Laws), except where such failure to be in compliance would not have, individually or in the aggregate, a Material Adverse Effect. The Company and each applicable Subsidiary are, and with respect to the Contracted Vessels will be, qualified to own or lease, as the case may be, and operate such vessels under all applicable international, national, state and local conventions, laws, regulations, orders, Governmental Licenses and other requirements (including, without limitation, all Environmental Laws) and Maritime Guidelines, including the laws, regulations and orders of each such vessel’s flag state, except where such failure to be so qualified would not have, individually or in the aggregate, a Material Adverse Effect. (C) Each Owned Vessel is, and each Contracted Vessel will be, classed by any of Lloyd’s Register of Shipping, American Bureau of Shipping, Det Norske Veritas or a classification society which is a full member of the International Association of Classification Societies and each Owned Vessel is, and the Company will use reasonable commercial efforts to ensure each Contracted Vessel will be, in class with valid class and trading certificates, without any overdue recommendations.

• Mail Order Catalog Warnings In the event that, the Settling Entity prints new catalogs and sells units of the Products via mail order through such catalogs to California consumers or through its customers, the Settling Entity shall provide a warning for each unit of such Product both on the label in accordance with subsection 2.4 above, and in the catalog in a manner that clearly associates the warning with the specific Product being purchased. Any warning provided in a mail order catalog shall be in the same type size or larger than other consumer information conveyed for such Product within the catalog and shall be located on the same display page of the item. The catalog warning may use the Short-Form Warning content described in subsection 2.3(b) if the language provided on the Product label also uses the Short-Form Warning.