Operable Xxxx 0 (OU-2) Sample Clauses

Operable Xxxx 0 (OU-2). The focus of OU - 2 will be the evaluation of the entire PCE plume including additional contaminated groundwater delineation work in the ESS (AOU - 1) in order to further define the groundwater flow and extent of contaminant migration. OU - 2 remedial investigation work plan (OU - 2 RIWP) will be developed and implemented to delineate the nature and extent (determine chemical characteristics and identify horizontal and vertical extent) on the VAMC and in surrounding areas including a determination of the farthest western extent of the Plume. Because only five (5) monitoring xxxxx were installed previously, VA’s initial activities in OU - 2 will focus on defining the deep groundwater flow regimes and tracing the PCE plume between the ESS, the VAMC and SLC Well 18. Data will be collected to help define the complex stratigraphy and aquifer interaction with SLC Well 18, the Wasatch Mountains, Mt. Olivet; University of Utah irrigation xxxxx, the two identified fault traces and the ESS bench depositional area. The OU – 2 RI will also evaluate other potential groundwater contamination sources to determine their impact on the Site.
AutoNDA by SimpleDocs

Related to Operable Xxxx 0 (OU-2)

  • Provisioning of High Frequency Spectrum and Splitter Space 3.2.1 BellSouth will provide <<customer_name>> with access to the High Frequency Spectrum as follows:

  • Contractor’s Xxxxxxxx to City Compensation. The Contractor shall send invoices to the City on a monthly or bi-monthly basis for the amounts to be paid pursuant to this contract. Each invoice shall document, to the reasonable satisfaction of the City: such information as may be reasonably requested by the City. Within 60 days after the City receives an invoice, the City shall send the Contractor a check in payment for all undisputed amounts contained in the invoice.

  • CONTRACT XXXXXXXX Contractor and the distributors/resellers designated by the Contractor, if any, shall provide complete and accurate billing invoices to each Authorized User in order to receive payment. Xxxxxxxx for Authorized Users must contain all information required by the Contract and the State Comptroller. The State Comptroller shall render payment for Authorized User purchases, and such payment shall be made in accordance with ordinary State procedures and practices. Payment of Contract purchases made by Authorized Users, other than Agencies, shall be billed directly by Contractor on invoices/vouchers, together with complete and accurate supporting documentation as required by the Authorized User. Submission of an invoice and payment thereof shall not preclude the Commissioner from reimbursement or demanding a price adjustment in any case where the Product delivered is found to deviate from the terms and conditions of the Contract or where the billing was inaccurate. Contractor shall provide, upon request of the Commissioner, any and all information necessary to verify the accuracy of the xxxxxxxx. Such information shall be provided in the format requested by the Commissioner and in a media commercially available from the Contractor. The Commissioner may direct the Contractor to provide the information to the State Comptroller or to any Authorized User of the Contract.

  • Unbundled Voice Xxxx - XX0 (XXX-XX0). Loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on XX0 Xxxxx when reuse of existing facilities has been requested by NewPhone, however, OC is always required on UCLs that involve the reuse of facilities that are currently providing service. NewPhone may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides Loop Make-Up information which is similar to the information normally provided in a Design Layout Record (DLR). Upon issuance of a non-coordinated order in the service order system, XX0 Xxxxx will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type Loops for its customers.

  • SHOP XXXXXXX (a) The Union may elect or appoint a Shop Xxxxxxx or Shop Stewards to represent the employees and the Union shall notify the Company as to the name or names of such Shop Xxxxxxx or Shop Stewards. The Company agrees that no Shop Xxxxxxx shall suffer any discrimination by reason of holding such office.

  • XXXXXXX XXXX MAINTENANCE Purchaser shall maintain all roads used under this contract in accordance with the FOREST ACCESS ROAD MAINTENANCE SPECIFICATIONS for the entire term of this contract. Maintenance is required even during periods of inactivity.

  • Schematic Design Phase Services § 3.2.1 The Architect shall review the program and other information furnished by the Owner, and shall review laws, codes, and regulations applicable to the Architect’s services.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • XXX Hosting 10.1 XXX Hosting is not required for resale in the BellSouth region.

  • SS7 Network Interconnection 9.7.1 SS7 Network Interconnection is the interconnection of Global Connection local signaling transfer point switches or Global Connection local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Global Connection local or tandem switching systems, and other third-party switching systems directly connected to the XxxxXxxxx XX0 network.

Time is Money Join Law Insider Premium to draft better contracts faster.