Common use of Order Coordination and Order Coordination-Time Specific Clause in Contracts

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Nexus to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Nexus’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus to order a specific time for OC to take place. BellSouth will make every effort to accommodate Nexus’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus Ruddata to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusRuddata’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Ruddata to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusRuddata’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Ruddata a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Ruddata may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Ruddata specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Nexus Utility USA to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusUtility USA’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Nexus Utility USA to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusUtility USA’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Utility USA a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Utility USA may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Utility USA specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus ICG to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusICG’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus ICG to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusICG’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus ICG a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus ICG may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus ICG specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus USA Telecom, Inc. to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusUSA Telecom, Inc.’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus USA Telecom, Inc. to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusUSA Telecom, Inc.’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus USA Telecom, Inc. a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus USA Telecom, Inc. may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus USA Telecom, Inc. specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus ACI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusACI’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus ACI to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusACI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus ACI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus ACI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus ACI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus SPARDI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusSPARDI’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus SPARDI to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusSPARDI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus SPARDI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus SPARDI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus SPARDI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus TCG to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusTCG’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus TCG to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusTCG’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus TCG a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus TCG may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus TCG specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus ACN to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusACN’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus ACN to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusACN’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus ACN a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus ACN may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus ACN specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus CCI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusCCI’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus CCI to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusCCI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus CCI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus CCI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus CCI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Nexus Globe to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusGlobe’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Globe to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusGlobe’s specific conversion time request. However, BellSouth XxxxXxxxx reserves the right to negotiate with Nexus Globe a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Globe may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Globe specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus BAK to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusBAK’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus BAK to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusXXX’s specific conversion time request. However, BellSouth XxxxXxxxx reserves the right to negotiate with Nexus BAK a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus BAK may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus BAK specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Nexus Gateway to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusGateway’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Gateway to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusGateway’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Gateway a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Gateway may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Gateway specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus Solution Telecom to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusSolution Telecom’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Solution Telecom to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusSolution Telecom’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Solution Telecom a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Solution Telecom may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Solution Telecom specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus Covista to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusCovista’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Covista to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusCovista’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Covista a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Covista may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Covista specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus Columbus Local to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusColumbus Local’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Columbus Local to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusColumbus Local’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Columbus Local a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Columbus Local may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Columbus Local specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus Xxxx to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Nexus’s Xxxx’x facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Xxxx to order a specific time for OC to take place. BellSouth will make every effort to accommodate Nexus’s Xxxx’x specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Xxxx a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Xxxx may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Xxxx specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Nexus Hotline to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to NexusHotline’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Nexus Hotline to order a specific time for OC to take place. BellSouth will make every effort to accommodate NexusHotline’s specific conversion time request. However, BellSouth reserves the right to negotiate with Nexus Hotline a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Nexus Hotline may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Nexus Hotline specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.