Commercial Driver’s License As a result of recent Federal statutory requirements, the State of Michigan enacted Act 346 of 1988. The parties agree that as a result of these statutory requirements some employees within the Technical Bargaining Unit may be required to obtain and retain a Commercial Drivers License (CDL) to continue to perform certain duties for the State. Whenever a CDL is referred to in this Section, it is understood to mean the CDL and any required endorsements. In order to implement this provision, the parties agree to the following:
A. The Employer will reimburse the cost of obtaining and renewing the required CDL group license and endorsements for those employees in positions where such license and endorsements are required.
B. The Employer will reimburse, on a one time basis, the fee for the skills test, if required, provided the skills test is not being required because of the employee's poor driving record. In that case, the employee is responsible for the cost of the skills test. Where a skills test is required, the employee will be permitted to utilize the appropriate state vehicle.
C. Employees shall be eligible for one grant of administrative leave to take the test to obtain or renew the CDL. Should the employee fail the test initially, the employee shall complete the necessary requirements on non-work time.
D. Employees reassigned to a position requiring a CDL shall be eligible for reimbursement and administrative leave in accordance with paragraphs 1, 2, and 3 of this Section.
E. Employees desiring to transfer, promote, bump or be recalled to a position requiring a CDL are not eligible for reimbursement for obtaining the initial CDL but shall be eligible for reimbursement for renewals.
F. Employees who fail to obtain, or retain, a CDL may be subject to removal from their positions. Employees who fail required tests may seek a 90 day extension of their current license, during which the Employer will retain the employee in his or her current or equivalent position. The Employer shall not be responsible for any fees associated with such extensions. At the end of the 90 day extension, if the employee fails to pass all required tests, the employee may be reassigned at the Employer's discretion, in accordance with applicable contractual provisions, to an available position not requiring a CDL for which the employee is qualified, or, if no position is available the employee will be laid off without bumping rights and will be placed on the Departmental Recall List, subject to recall in accordance with this Agreement. Those employees not choosing to extend their license for the 90 day period will be removed from their positions at the expiration of their current license and may be reassigned at the Employer's discretion, in accordance with applicable contractual provisions, to an available position not requiring a CDL for which the employee qualifies, or if no position is available, he or she will be laid off without bumping rights and will be placed on the Departmental Recall list.
G. Employees required to obtain a medical certification of fitness shall have the "Examination to Determine Physical Condition of Drivers" form filed in their medical file. A copy of the medical "Examiners Certificate" shall be placed in their personnel file. The Employer agrees to pay for the examination and to grant administrative leave for the time necessary to complete the examination. The fitness standards for a CDL are unchanged from current Federal Department of Transportation Standards and Michigan Motor Carrier Standards.
H. Employees who do not meet the required physical standards but who are otherwise qualified for a CDL may apply for a waiver to the Motor Carrier Appeal Board.
I. Those employees employed by the State as intra-state drivers prior to June 10, 1984 shall be grandparented into the process and thereby be exempt from the medical certification requirement.
Limited Liability of Limited Partners (1) Each Unit of Limited Partnership Interest, when purchased by a Limited Partner, subject to the qualifications set forth below, shall be fully paid and non-assessable.
(2) A Limited Partner shall have no liability in excess of his obligation to make contributions to the capital of the Partnership and his share of the Partnership’s assets and undistributed profits, subject to the qualifications provided in the Partnership Act.
Certificate of Limited Liability Company Interest A Member’s limited liability company interest may be evidenced by a certificate of limited liability company interest executed by the Manager or an officer in such form as the Manager may approve; provided that such certificate of limited liability company interest shall not bear a legend that causes such limited liability company interest to constitute a security under Article 8 (including Section 8-103) of the Uniform Commercial Code as enacted and in effect in the State of Delaware, or the corresponding statute of any other applicable jurisdiction.
NO HARDSTOP/PASSIVE LICENSE MONITORING Unless an Authorized User is otherwise specifically advised to the contrary in writing at the time of order and prior to purchase, Contractor hereby warrants and represents that the Product and all Upgrades do not and will not contain any computer code that would disable the Product or Upgrades or impair in any way its operation based on the elapsing of a period of time, exceeding an authorized number of copies, advancement to a particular date or other numeral, or other similar self-destruct mechanisms (sometimes referred to as “time bombs,” “time locks,” or “drop dead” devices) or that would permit Contractor to access the Product to cause such disablement or impairment (sometimes referred to as a “trap door” device). Contractor agrees that in the event of a breach or alleged breach of this provision that Authorized User shall not have an adequate remedy at law, including monetary damages, and that Authorized User shall consequently be entitled to seek a temporary restraining order, injunction, or other form of equitable relief against the continuance of such breach, in addition to any and all remedies to which Authorized User shall be entitled.
Contractor Licensing, etc. Notwithstanding Section 14.c, District may terminate this Contract immediately by written notice to Contractor upon denial, suspension, revocation, or non-renewal of any license, permit, or certificate that Contractor must hold to provide services under this Contract.
Amendment of Limited Liability Company Agreement (a) Except as otherwise provided in this Section 8.1, this Agreement may be amended, in whole or in part, with: (i) the approval of the Board (including the vote of a majority of the Independent Directors, if required by the 0000 Xxx) without the Members approval; and (ii) if required by the 1940 Act, the approval of the Members by such vote as is required by the 0000 Xxx.
(b) Any amendment that would:
(i) increase the obligation of a Member to make any contribution to the capital of the Company;
(ii) reduce the Capital Account of a Member other than in accordance with Article V; or
(iii) modify the events causing the dissolution of the Company; may be made only if (i) the written consent of each Member adversely affected thereby is obtained prior to the effectiveness thereof or (ii) such amendment does not become effective until (A) each Member has received written notice of such amendment and (B) any Member objecting to such amendment has been afforded a reasonable opportunity (pursuant to such procedures as may be prescribed by the Board) to tender its entire Interest for repurchase by the Company.
(c) The power of the Board to amend this Agreement at any time without the consent of the other Members as set forth in paragraph (a) of this Section 8.1 shall specifically include the power to:
(i) restate this Agreement together with any amendments hereto that have been duly adopted in accordance herewith to incorporate such amendments in a single, integrated document;
(ii) amend this Agreement (other than with respect to the matters set forth in Section 8.1(b) hereof) to effect compliance with any applicable law or regulation or to cure any ambiguity or to correct or supplement any provision hereof that may be inconsistent with any other provision hereof; and
(iii) amend this Agreement to make such changes as may be necessary or advisable to ensure that the Company will not be treated as an association or a publicly traded partnership taxable as a corporation as defined in Section 7704(b) of the Code for U.S. federal income tax purposes.
(d) The Board shall cause written notice to be given of any amendment to this Agreement to each Member, which notice shall set forth (i) the text of the proposed amendment or (ii) a summary thereof and a statement that the text of the amendment thereof will be furnished to any Member upon request.
Outside Activities of Limited Partners Subject to any agreements entered into by a Limited Partner or its Affiliates with the General Partner, Partnership or a Subsidiary, any Limited Partner and any officer, director, employee, agent, trustee, Affiliate or stockholder of any Limited Partner shall be entitled to and may have business interests and engage in business activities in addition to those relating to the Partnership, including business interests and activities in direct competition with the Partnership or that are enhanced by the activities of the Partnership. Neither the Partnership nor any Partners shall have any rights by virtue of this Agreement in any business ventures of any Limited Partner or Assignee. Subject to such agreements, none of the Limited Partners nor any other Person shall have any rights by virtue of this Agreement or the partnership relationship established hereby in any business ventures of any other Person, other than the Limited Partners benefiting from the business conducted by the General Partner, and such Person shall have no obligation pursuant to this Agreement to offer any interest in any such business ventures to the Partnership, any Limited Partner or any such other Person, even if such opportunity is of a character which, if presented to the Partnership, any Limited Partner or such other Person, could be taken by such Person.
Procurement of Small Works Works estimated to cost $250,000 equivalent or less per contract, up to an aggregate amount not to exceed $800,000 equivalent, may be procured under lump-sum, fixed-price contracts awarded on the basis of quotations obtained from three (3) qualified domestic contractors in response to a written invitation. The invitation shall include a detailed description of the works, including basic specifications, the required completion date, a basic form of agreement acceptable to the Bank, and relevant drawings, where applicable. The award shall be made to the contractor who offers the lowest price quotation for the required work, and who has the experience and resources to complete the contract successfully. Part D: Review by the Bank of Procurement Decisions
DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK
Final Design Phase A. After acceptance by Owner of the Preliminary Design Phase documents, revised opinion of probable Construction Cost as determined in the Preliminary Design Phase, and/or any other Right of Way plan documents, subject to any Owner-directed modifications or changes in the scope, extent, character, or design requirements of or for the Project, and upon written authorization from Owner, Engineer shall:
1. Prepare final Drawings and Specifications indicating the scope, extent, and character of the Work to be performed and furnished by Contractor.
2. Visit the Site as needed to assist in preparing the final Drawings and Specifications.
3. Provide technical criteria, written descriptions, and design data for Owner’s use in filing applications for permits from or approvals of governmental authorities having jurisdiction to review or approve the final design; assist Owner in consultations with such authorities; and revise the Drawings and Specifications in response to directives from such authorities, as appropriate.
4. Advise Owner of any recommended adjustments to the opinion of probable Construction Cost.
5. After consultation with Owner, include in the Construction Contract Documents any specific protocols for the transmittal of Project-related correspondence, documents, text, data, drawings, information, and graphics, in electronic media or digital format, either directly, or through access to a secure Project website. Any such protocols shall be applicable to transmittals between and among Owner, Engineer, and Contractor during the Construction Phase and Post- Construction Phase, and unless agreed otherwise shall supersede any conflicting protocols previously established for transmittals between Owner and Engineer.
6. Assist Owner in assembling known reports and drawings of Site conditions, and in identifying the technical data contained in such reports and drawings upon which bidders or other prospective contractors may rely.
7. In addition to preparing the final Drawings and Specifications, assemble drafts of other Construction Contract Documents based on specific instructions and contract forms, text, or content received from Owner.
8. Prepare or assemble draft bidding-related documents (or requests for proposals or other construction procurement documents), based on the specific bidding or procurement-related instructions and forms, text, or content received from Owner.
9. Contract shall include contractor provided changeable message signs to communication construction information.
10. Furnish for review by Owner, its legal counsel, and other advisors, 6 copies of the final drawings and Specifications, assembled drafts of other construction Contract Documents, the draft bidding-related documents (or requests for proposals or other construction procurement documents), and any other final design Phase deliverables, by the established due date, with the Final Design Phase, and review them with Owner. Owner shall submit to Engineer any comments regarding the furnished items, and any instructions for revisions.
B. Engineer’s services under the Final Design Phase will be considered complete on the date when Engineer has delivered to Owner the final Drawings and Specifications, other assembled Construction Contract Documents, bidding-related documents (or requests for proposals or other construction procurement documents), and any other Final Design Phase deliverables.
C. In the event that the Work designed or specified by Engineer is to be performed or furnished under more than one prime contract, or if Engineer’s services are to be separately sequenced with the work of one or more prime Contractors (such as in the case of fast- tracking), Owner and Engineer shall, prior to commencement of the Final Design Phase, develop a schedule for performance of Engineer’s services during the Final Design, Bidding or Negotiating, Construction, and Post-Construction Phases in order to sequence and coordinate properly such services as are applicable to the work under such separate prime contracts.
