Common use of Packing and Marking Clause in Contracts

Packing and Marking. 6.1 Unless otherwise specified in the Contract, the Equipment Set shall be packed by the Seller in new wooden cases or containers. Necessary measures shall be taken to protect the Equipment Set from damage caused by moisture, rain rust, corrosion, shock an to ensure the Equipment Set to withstand numerous handling, loading and unloading as well as long distance ocean and inland transportation for the safe arrival of the Equipment Set at the Site. 6.2 The loose accessories in package or bundle shall be labeled by the Seller indicating contract No., name of equipment, name of accessories, and their position number and accessory number marked on assembly drawings. 6.3 The Seller shall on four (4) adjacent sides of each package xxxx conspicuously the following information in English with indelible paint: 1) Contract No.: 2) Shipping xxxx: 3) Destination: 4) Consignee: 5) Name of equipment and item No.: 6) Case/bale No.: 7) Gross/net weight: 8) Measurement: 6.4 The following documents shall be enclosed in each package of the Equipment Set: 1) Two (2) copies of detailed packing list; 2) Two (2) copies of quality certificate; 3) One (1) copy of Technical Documentation for relevant contract equipment, which shall be properly packed to withstand numerous handlings, long-distance transportation and to protect from damage as a result of moisture and rain. 6.5 In case of container transportation, the Seller shall examine the condition of the containers, so that only those in good conditions shall be used for delivery of the Equipment Set. Sufficient shores or chocks shall be provided in order to prevent any part of the Equipment Set from moving inside the containers. The Seller shall be liable for any damage to the Equipment Set thus incurred due to the negligence of the Seller or any insufficiency of lashing and/or securing of the Equipment Set inside the containers. 6.6 The Seller shall use wooden packages free from any insect infestation. Should insect infestation be found in quarantine inspection, the Seller shall bear the cost incurred in fumigation or replacement of the packages at the Port of Unloading.

Packing and Marking. 6.1 Unless otherwise specified in the Contract, the Equipment Set shall be packed All goods delivered by the Seller shall conform to the regulations on package and warehousing and transportation indicating signs in new wooden cases or containers. Necessary measures the national standard and the regulations of the transportation department, shall be taken provided with the firm package suitable for long-distance transportation, multi-frequency handling, loading and unloading, and shall have vibration damping and shock resistant measures to protect ensure that the Equipment Set from contact equipment can be transported to the site safely without damage. If the package can not prevent the equipment damage caused by moisturethe vertical or horizontal acceleration during the transportation, loading and unloading process, the Seller shall deal with the design structure of the equipment. The Seller shall pack the contract equipment according to the different shapes and characteristics, and shall take the protection measures such as moisture protection, rain prevention, mould proof, rust protection, corrosion protection and shock proof according to the equipment characteristics to ensure that the goods can be transported to the installation site of the contract equipment safely without any damage or corrosion. The Seller shall appropriately paint the contract equipment to accommodate the long-distance offshore and overland transportation conditions and demands for hoisting, unloading, long-term air storage and actual operation so as to prevent the damage caused by the sleet, wetting, rust, corrosion, shock an to and mechanical and chemical effects. Before product packaging, the Seller shall check and clear all foreign matters and ensure the Equipment Set to withstand numerous handling, loading all parts and unloading as well as long distance ocean and inland transportation for the safe arrival of the Equipment Set at the Sitecomponents complete. 6.2 The loose accessories in package or bundle Seller shall be labeled by clearly xxxx the Seller indicating contract No., name of equipment, name of accessories, and their position component number and accessory the part number marked on assembly drawingsin the shop drawing for all loose packed components in the packing case and the bale. 6.3 The Seller shall print the following marks with the fadeless paint in visible Chinese characters on four sides of each packing case. (1) Contract number; (2) Destination; (3) Name of supply/receiving unit; (4) adjacent sides of each package xxxx conspicuously the following information in English with indelible paint:Equipment name and drawing number; 1) Contract No.: 2) Shipping xxxx: 3) Destination: 4) Consignee: (5) Name of equipment and item No.:Case number/piece number; (6) CaseGross weight/bale No.:net weight (kg); (7) Gross/net weight: 8) Measurement:Volume (length × width × height, in MM). 6.4 The following For the goods with the weight equal to or larger than 2 tons, the center of gravity and the hoisting point shall be marked with the signs and patterns commonly used for transportation on the side surface of the packing case to facilitate handling, and the hoisting tools and the instruction documents shall be enclosed in each package of the Equipment Set: 1) Two (2) copies of detailed packing list; 2) Two (2) copies of quality certificate; 3) One (1) copy of Technical Documentation provided for relevant contract equipment, which shall be properly packed to withstand numerous handlings, long-distance transportation and to protect from damage as a result of moisture and rain. 6.5 In case of container transportation, the Seller shall examine the condition of the containers, so that only those in good conditions shall be used for delivery of the Equipment Set. Sufficient shores or chocks shall be provided in order to prevent any part of the Equipment Set from moving inside the containersfree. The Seller shall xxxx “be liable for any damage careful”, “Handle with care”, “Upward”, “Rain prevention”, “Moisture protection”, “Don’t turn upside down”, “Heat protection”, “Far away from radioactive source and heat source”, “Sling here”, “Center of gravity”, “Stacking weight limit”, “Stacking layer number limit”, “temperature limit” and other conventional signs on the case body according to each characteristic and different transportation, loading and unloading requirements, and shall conform to the Equipment Set thus incurred due to regulations of GB191 and GB6388. 6.5 For the negligence of bare goods, the Seller related contents shall be marked with the metal labels or any insufficiency of lashing and/or securing of directly marked on the Equipment Set inside equipment proper. The large goods shall be provided with sufficient goods supports or packing stow xxxxx at the containersSeller’s expense. 6.6 The detailed packing list including the name, quantity, number and the like of the separate package, the manufacturer certificate or the quality certificate shall be respectively provided in duplicate in each packing case. The product delivery quality certificate and the technical instruction shall be respectively provided in duplicate in each packing case of the purchased pieces. CPI Bayin Obo 49.5MW Wind Farm Project Purchase Contract of Wind Power Generating Unit 6.7 The Seller shall use wooden packages free from any insect infestationsubmit three sets of shipping documents to the Buyer within 3 days after the equipment shipment according to the provisions of Article 6. 6.8 The spare parts and the special tools shall be packed respectively. Should insect infestation The above contents shall be found in quarantine inspectionmarked outside the packing case, and shall be marked with the Seller shall bear the cost incurred in fumigation characters of “Spare Parts” or replacement of the packages at the Port of Unloading“Special Tools” for bulk delivery.

Packing and Marking. 6.1 Unless otherwise specified in the Contractcontract, the Equipment Set equipment shall be packed by the Seller Supplier in new wooden cases or containerscases, and all packing expenses shall be for the Supplier’s account. Necessary measures shall be taken to protect the Equipment Set equipment from damage damages caused by moisture, rain rust, corrosion, shock an and to ensure the Equipment Set equipment to withstand numerous handling, loading and unloading as well as long distance ocean and inland transportation for the safe arrival of the Equipment Set equipment at the Sitework-site. 6.2 The loose accessories in package or bundle shall be labeled by the Seller Supplier indicating contract No., name of equipment, name of accessories, accessories and their position number number, and accessory number marked on assembly drawings. Spare parts and tools shall be marked with the word “Spare parts or tools” besides the above mentioned particular. 6.3 The Seller Supplier shall on four (4) adjacent sides of each package xxxx conspicuously conspicuous the following information in English with indelible paint: 1a) Contract No.: 2b) Shipping xxxx: 3c) Destination: 4d) Consignee: 5e) Name of contract equipment and item No.: 6f) Case/bale No.: 7g) Gross/net weight: 8) Measurement: 6.4 Should the equipment weigh more than 2 metric tons, the weight, gravity and hoisting positions shall be marked in English with international trade transportation marks on the four adjacent sides on each case so as to facilitate unloading and handling. SUPPLIER Initials /s/HG_MS PURCHASER Initials /s/SP [*] = CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS, HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS AMENDED. In accordance with different requirements in loading, unloading and shipping, the package shall be conspicuously marked with “Handle with care, right side up, keep dry” in English and with appropriate international trade marks. 6.5 The following documents shall be enclosed in each package of the Equipment Setequipment: 1a) Two (2) duplicate copies of detailed packing list; 2b) Two (2) duplicate copies of quality certificate; 3c) One (1) copy Two duplicate copies of Technical Documentation technical documentation for relevant contract equipment, which shall be properly packed to withstand numerous handlings, long-distance transportation and to protect from damage as a result of moisture and rain. 6.5 6.6 In case of container transportation, the Seller Supplier shall examine the condition of the containers, so that only those in good conditions condition shall be used for delivery of the Equipment Setequipment. Sufficient shores or chocks shall be provided in order to prevent any part of the Equipment Set equipment from moving inside the containers. The Seller Supplier shall be liable for any damage to the Equipment Set equipment thus incurred due to the negligence of the Seller or any insufficiency of lashing and/or securing of the Equipment Set inside the containersSupplier. 6.6 6.7 If the equipment is damaged or lost due to improper packing or inadequate protective measure, the Supplier shall be responsible for repair, replacement or compensation in accordance with the contract. If the equipment is mis-transported due to mistake or ambiguousness in package or shipping marks, the Supplier shall bear additional expenses thus incurred. 6.8 The Seller Supplier shall use wooden packages free from any insect infestation. Should insect infestation be found in quarantine inspection, the Seller Supplier shall bear the cost incurred in fumigation or replacement of the packages at the Port port of Unloadingunloading, and the liquidated damages provision of Chapter 5.7 above shall apply to any delay in shipment caused by such quarantine inspection.

Packing and Marking. 6.1 4.5.1. Unless otherwise specified in the ContractAgreement, the Equipment Set shall be packed by the Seller SELLER in new wooden cases or containerscases, and all packing expenses shall be for SELLER’s account. Necessary measures shall be taken to protect the Equipment Set from damage damages caused by moisture, rain rain, rust, corrosion, shock an and to ensure the Equipment Set to will withstand numerous handling, loading and unloading as well as long distance ocean and inland transportation for the safe arrival of the Equipment Set at the Work Site. 6.2 4.5.2. The loose accessories in package or bundle all packages and bundles shall be labeled by SELLER indicating the Seller indicating contract No., name of equipmentthe Equipment to which such accessories are related, the name of accessories, the accessories and their position number number, and any accessory number marked on assembly drawings. Spare parts and tools shall be marked with the word “Spare parts or tools” in addition to the above mentioned particulars. 6.3 The Seller shall 4.5.3. SELLER shall, on four (4) adjacent sides of each package crate, conspicuously xxxx conspicuously the following information in English with indelible paint: 1) Contract No.: 2(a) Shipping xxxx: 3xxxx (b) Destination: 4Destination (c) Consignee: 5Consignee (d) Name of equipment Equipment and item No.: 6(e) Case/bale No.: 7(f) Gross/net weight (g) Measurement SELLER Initials & Date 25/3-08 JB BUYER Initials & Date DN 4/8/08 4.5.4. Should the Equipment weigh more than 2 metric tons, the weight:, gravity and hoisting positions shall be marked in English with international trade transportation marks on the four adjacent sides on each case so as to facilitate unloading and handling. In accordance with different requirements in loading, unloading and shipping, the package shall be conspicuously marked with “Handle with care, right side up, keep dry” in English and with appropriate international trade marks. 8) Measurement: 6.4 4.5.5. The following documents shall be enclosed in each package of the Equipment SetEquipment: 1(a) Two (2) duplicate copies of detailed packing list; 2(b) Two (2) duplicate copies of quality certificate; 3(c) One (1) copy Two duplicate copies of Technical Documentation for relevant contract equipment, which Equipment 4.5.6. Sufficient shores or chocks shall be properly packed provided in order to withstand numerous handlings, long-distance transportation and prevent the Equipment from moving inside the containers. SELLER shall be liable for any damage to protect from damage as a result the Equipment thus incurred due to the negligence of moisture and rainSELLER. 6.5 4.5.7. In case of container transportation, the Seller SELLER shall examine the condition of the containers, so that only those in good conditions condition shall be used for delivery of the Equipment SetEquipment. Sufficient shores or chocks shall be provided in order to prevent any part of the Equipment Set from moving inside the containers. The Seller shall be liable for any damage to the Equipment Set thus incurred due to the negligence of the Seller or any insufficiency of lashing and/or securing of the Equipment Set inside the containers. 6.6 The Seller SELLER shall use wooden packages crates free from any insect infestation. Should insect infestation be found in quarantine inspection, the Seller SELLER shall bear the cost incurred in fumigation or replacement of the packages creates at the Port of Unloading, and the liquidated damages provision of Section 4.4 above shall apply to any delay in shipment caused by such quarantine inspection. 4.5.8. If the Equipment is damaged or lost due to improper packing or inadequate protective measure, SELLER shall be responsible for repair, replacement or compensation in accordance with the Agreement. If the Equipment is mis-transported due to mistake or ambiguousness in package or shipping marks, SELLER shall bear additional expenses thus incurred.

Packing and Marking. 6.1 Unless otherwise specified in the Contract, the Equipment Set shall be packed by the Seller in new wooden cases or containers. Necessary measures shall be taken to protect the Equipment Set from damage caused by moisture, rain rust, corrosion, shock an to ensure the Equipment Set to withstand numerous handling, loading and unloading as well as long distance ocean and inland transportation for the safe arrival of the Equipment Set at the Site. 6.2 The loose accessories in package or bundle shall be labeled by the Seller indicating contract No., name of equipment, name of accessories, and their position number and accessory number marked on assembly drawings. 6.3 The Seller shall on four (4) adjacent sides of each package xxxx conspicuously the following information in English with indelible paint: 1) Contract No.: 2) Shipping xxxx: 3) Destination: 4) Consignee: 5) Name of equipment and item No.: 6) Case/bale No.: 7) Gross/net weight: 8) Measurement: 6.4 The following documents shall be enclosed in each package of the Equipment Set: 1) Two (2) copies of detailed packing list; 2) Two (2) copies of quality quaUty certificate; 3) One (1) copy of Technical Documentation for relevant contract equipment, which shall be properly packed to withstand numerous handlings, long-distance transportation and to protect from damage as a result of moisture and rain. 6.5 In case of container transportation, the Seller shall examine the condition of the containers, so that only those in good conditions shall be used for delivery of the Equipment Set. Sufficient shores or chocks shall be provided in order to prevent any part of the Equipment Set from moving inside the containers. The Seller shall be liable for any damage to the Equipment Set thus incurred due to the negligence of the Seller or any insufficiency of lashing and/or securing of the Equipment Set inside the containers. 6.6 The Seller shall use wooden packages free from any insect infestation. Should insect infestation be found in quarantine inspection, the Seller shall bear the cost incurred in fumigation or replacement of the packages at the Port of Unloading.